Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 8 years ago.
Improve this question
I am very new to VBA and I have read so much on the If-Then-Replace that I think I'm confusing myself. Within my worksheet I have two columns that come in with more data than what I need and I have to get it pared down in order to concatenate it.
Column H (Header) has the following data in each cell: Network: Series: Episode : Data
Column J (Header) has the following data in each cell: Network: Type: Type2: Type3
I run a text-to-columns to get it down to have the Network in 1 column and the Series in the 2nd column.
What I need is a Search in Column J for "specific network". If this is true then replace the network in Column H.
Question: Will I need to also run a text-to-columns in Column J to get a 1:1 comparison?
Question: Can you help me with the VBA code to do the Find-If-Then-Replace?
Thank you so much!
This should do what you're looking to do... If it works for you, please mark the answer as accepted by clicking the checkmark to the left.
Sub Freplace()
dim i as int
dim s as string
i = 1
s = "specific network"
Do until Cells(i,10).Value = ""
If Cells(i,10).Value = s Then Cells(i,8).Value = s
i = i+1
Loop
End Sub
Related
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 4 years ago.
Improve this question
I want to use a number in a cell of my main excel sheet and use it to search for a specific line in another excel file that start with this number. After, the program needs to use the value of a specific cell in this line for a cell in my main excel sheet.
EX : value of the first cell in my sheet : 6.02 . Now the program need to find this value in a column of another file. The line that start with 6.02 contain a cell with the value dog. The value dog need to go inside a cell next to the first one that contain 6.02.
I need your help because I know nothing about VBA. I'm starting today!
Thank you very much !!
You can accomplish this with a VLOOKUP between two books. The guts of the equation are below. You wont actually type in the '[book2]SheetName' portion, this will need to reflect the name of your other workbook and the sheet that you are looking at within that book.
A2 = Look up value (in your example 6.02)
X1 = Column the return value is (in your example "dog")
X2 = Column Index Number (Of if you are not starting from A it represents the (Index Col of Value - Index of Look up Value) + 1
=VLOOKUP(A2,'[Book2]SheetName'!$A$X1,X2,0)
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 6 years ago.
Improve this question
I am looking for a code that will pop up a message box when a value (ie in cell A1) is not between the value of two seperated cell values.
For instance, display a pop message when the value A1 is lower than A2 or if higher then A3;
Can anyone help me with this one?
Thx in adv;
Brgds, Jimmy
Use following simple sub.
Sub CHeckVal()
If Range("A1").Value < Range("A2") Or Range("A1").Value > Range("A3") Then
MsgBox Range("A1").Value
End If
End Sub
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 8 years ago.
Improve this question
Here's the situation:
I have two excel sheets.
The first sheet contains a table of product codes and product descriptions (Two columns A and B).
I have a second sheet where someone is supposed to enter the product code and automatically have the next cell fill up with the product description and the cell next to it with the time.
I was wondering if that's do-able without VBA? If so, can someone give me start.
Best,
You could have the first cell that you want to auto fill have an IF statement, where if the cell has no value, nothing happens, and anything other than that gets a calculation.
Using A2:B100 as a Range if you have a header Row. Adjust to your own needs, of course.
IF FUNCTION
'IF (condition, result if true, result if false)'
VLOOKUP FUNCTION
'VLOOKUP(lookup_value,table_array,col_index_num,range_lookup)'
=If($A1 = "", "", VLOOKUP(A1,Sheet1!$A$2:$B$100,2))
The next cell over would have something similar:
=IF($A1 = "", "", NOW())
This will get you the time. You will also have to have the cell format set to Time.
There is a problem with that. The screenshot below illustrates it.
It will just keep refreshing with the current time over and over. I would use a bit of VBA to solve that by setting the value property instead of a formula.
Sheets("Sheet2").Cells(row,col).Value = Now()
You could copy and paste the value into another cell. Just the value. Not the formula.
Or you could check out this article: about generating Time Stamps.
edit: included VBA solution
Closed. This question needs details or clarity. It is not currently accepting answers.
Want to improve this question? Add details and clarify the problem by editing this post.
Closed 8 years ago.
Improve this question
My chart contains some extraneous series. These series all contain the word "series" in them (e.g., "Series1", "Series2") rather than descriptive names.
Can someone please provide a VBA procedure that executes this Pseudocode:
In chart 1 if any series name contains the word "series" delete it.
If not then do nothing
Sub DeleteSeriesWith_Series_InName()
Dim iSrs As Long
With ActiveChart
For iSrs = .SeriesCollection.Count To 1 Step -1
If InStr(LCase$(.SeriesCollection(iSrs).Name), "series") > 0 Then
.SeriesCollection(iSrs).Delete
End If
Next
End With
End Sub
Count series backwards, because deleting a series changes the series numbers of any series after it.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
Questions asking for code must demonstrate a minimal understanding of the problem being solved. Include attempted solutions, why they didn't work, and the expected results. See also: Stack Overflow question checklist
Closed 9 years ago.
Improve this question
I know the range name of the start of a list - 1 column wide and x rows deep.
How do I calculate x?
There is more data in the column than just this list. However, this list is contiguous - there is nothing in any of the cells above or below or either side beside it.
Sheet1.Range("myrange").Rows.Count
Function ListRowCount(ByVal FirstCellName as String) as Long
With thisworkbook.Names(FirstCellName).RefersToRange
If isempty(.Offset(1,0).value) Then
ListRowCount = 1
Else
ListRowCount = .End(xlDown).row - .row + 1
End If
End With
End Function
But if you are damn sure there's nothing around the list, then just thisworkbook.Names(FirstCellName).RefersToRange.CurrentRegion.rows.count
Why not use an Excel formula to determine the rows? For instance, if you are looking for how many cells contain data in Column A use this:
=COUNTIFS(A:A,"<>")
You can replace <> with any value to get how many rows have that value in it.
=COUNTIFS(A:A,"2008")
This can be used for finding filled cells in a row too.
You can also use:
Range( RangeName ).end(xlDown).row
to find the last row with data in it starting at your named range.
I am sure that you probably wanted the answer that #GSerg gave. There is also a worksheet function called rows that will give you the number of rows.
So, if you have a named data range called Data that has 7 rows, then =ROWS(Data) will show 7 in that cell.
That single last line worked perfectly #GSerg.
The other function was what I had been working on but I don't like having to resort to UDF's unless absolutely necessary.
I had been trying a combination of excel and vba and had got this to work - but its clunky compared with your answer.
strArea = Sheets("Oper St Report CC").Range("cc_rev").CurrentRegion.Address
cc_rev_rows = "=ROWS(" & strArea & ")"
Range("cc_rev_count").Formula = cc_rev_rows