I have an Xbox One controller setup with Unity3d, and when I try to use the RT button nothing happens.
With the following setup, the RB button works fine:
I have looked at this but setting that up doesn't make sense to me. I have tried 3rd Axis 0_10th and I have tried 3rd Axis 0_1 but those are not valid. What is the proper settings for this to work?
To the get the result I was looking for, I needed to set it up the following way:
Then to get the button to work we need to use:
if(Mathf.Round(Input.GetAxisRaw("Fire1")) < 0){
// Firing code here
}
instead of:
if(Input.GetButton("Fire1")){
// Firing code here
}
Yes, thanks for posting. I was having the same problem using a 360 wired controller in Unity3d. It looks like the Left and Right triggers now both use the 3rd axis (Joystick) with the Left generating positive (0 to +1) values and the Right trigger generating negative (0 to -1) values. This differs from all the documentation I was finding.
Related
I am using ionic 4. I want to do search function in my apps. I am using search bar and get the result from API.
My problem is it always output duplicate result.
One problem is I haven't typing the word finish it already match the result that I want to search, then it will output the result.
Another problem is when I finish typing it output again the result.
How can I solved or avoid this problem?
Here is my html code:
<ion-searchbar [(ngModel)]="name" (ionCancel)="onCancel($event)" (ionChange)="Search($event)"></ion-searchbar>
Here is my home.page.ts
Search() {
this.myService.getSearch(this.name);
}
The second one sounds like you are not wiping the data in your this.myService.getSearch call - check what it does in there, is it starting from a new list or just returning more results? If that doesn't solve that issue then post the code for that section.
The first issue is by design.
You can slow this down with the debounce option:
<ion-searchbar debounce="1500"></ion-searchbar>
There are two input events you can experiment with ionChange and ionInput - they act differently but I cannot remember exactly which does which, you will have to try them both. A third option would be to handle neither of them and just use a submit button.
I'm trying to check if a value is contained in the innertext of a webelement but I'm having a little problem: frames seem to change at every refresh of the pages.
These are the steps I've recorded:
Browser("SystemPage").Page("SystemP").Frame("dme2_header").Image("Gestione Anagrafiche").Click<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_appl").WebEdit("pdrBean.pdrPod").Set parameter("POD")<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_appl").WebButton("Cerca").Click
Browser("SystemPage").Page("SystemP").Frame("dme2_appl_2").Image("show_files").Click
Browser("SystemPage").Page("SystemP").Frame("dme2_appl_6").Image("Lente").Click
cctype = Browser("SystemPage").Page("SystemP").Frame("dme2_appl_7").WebElement("arrow_down").GetROProperty("innertext")<br>
DataAct = Browser("SystemPage").Page("SystemP").Frame("dme2_appl_7").WebElement("arrow_down_2").GetROProperty("innertext")<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_header").Image("Gestione Anagrafiche").Click
The frames "dme2_appl6" and "dme2_appl7" changes at every refresh of the two pages.
The question is simple: how can I rewrite these two actions to make them universal?
I've tried to do something like:
Set objFrame = Frame("title:=dme2_appl_.")
and then
Browser("SystemPage").Page("SystemP").objFrame.Image("Lente").Click
But QTP gives me an error in return: "property or method not supported by the object"
Please try using the below code
Browser("SystemPage").Page("SystemP").Image("Lente").Click
Avoid using the "Frame" and if you really want to use it, put regex for name property of Frame.
Go to Object Properties--> Click on the Frame object --> Mandatory Properties--> Change name property as
like iFrame_213123123 to i.*
Hope this will solve your problem.
I don't think you can use a frame object that way. When you write Page().Frame() UFT sets the frame's parent in different way than if you first create the Frame.
Think of Frame() as a function that behaves differently when called on a Page or as a free function.
Try:
Browser("SystemPage").Page("SystemP").Frame("title:=dme2_appl_.")
I am learning HP UFT.
Recently I came across fireevent and I tried to implement it on the website of Flipkart. I was trying to use firevent("onmouseover") for the link Men on the homepage of the website.
I used ChildObjects to find out the Link and WebElement (in two different tests), first Highlighted it and then used object.fireevent("onmouseover") as well as object.fireevent("OnClick"). The OnClick is working and it is showing the link as selected (i.e. the dotted box covering the link when we press tab), but it is not showing the Menu Under Men Section.
I had googled and bingged a lot. But was unable to find the exact working of FireEvent in QTP/UFT.
Please Help me solving the above problem as well as some tutorials on FireEvent.
EDIT: I am using IE 11 for testing.
Motti has already answered the technical definition, but I shall attempt to give you a solution to your functional issue.
In my experience .FireEvent often doesn't work as you would expect. An alternative for something like onmouseover is to simulate user behaviour a bit more closely by actually moving the mouse to the desired location. In our framework we have a little extension function to do just that, a pared-down version of which is shown here:
Sub My_MouseOver(objSender)
Dim absX : absX = objSender.GetROProperty("abs_x")
Dim absY : absY = objSender.GetROProperty("abs_y")
Dim width : width = objSender.GetROProperty("width")
Dim height : height = objSender.GetROProperty("height")
Dim x : x = (absX + (width / 2))
Dim y : y = (absY + (height / 2))
Dim deviceReplay : Set deviceReplay = CreateObject("Mercury.DeviceReplay")
deviceReplay.MouseMove x, y
Reporter.ReportEvent micDone, "A step name", "A useful step description"
End Sub
RegisterUserFunc "Link", "MouseOver", "My_MouseOver"
RegisterUserFunc "WebButton", "MouseOver", "My_MouseOver"
RegisterUserFunc "WebElement", "MouseOver", "My_MouseOver"
As an example you can then do as follows to bring up the "ELECTRONICS" menu overlay on flipkart.com (obviously substitute your own Browser and Page definitions):
Browser("Flipkart").Page("Main Nav").Link("xpath:=//a[#data-tracking-id='electronics']").MouseOver
In the original version there's various extra bits of error handling and custom reporting so it tells you what you clicked on, but the essence is the same. It locates the object on screen, calculates the centre and moves the mouse there. You might want to wait a small amount of time for the menu overlay to appear after doing so before calling .Click on one of the newly-displayed sub-elements.
I found a solution to my problem and it is working perfectly.
Setting.WebPackage("ReplayType") = 2
object.FireEvent "onmouseover"
Setting.WebPackage("ReplayType") = 1
In this case, the object will be:
Browser("name:=Online Shopping.*").Page("name:=Online Shopping.*").Link("innertext:=Men")
I have tried this and it is working fine. I guess, we do not need any alternatives. But I really don't know is, Ctrl+Space is not working for this in UFT. Don't know the reason.
This actually depends on what browser you're using.
Warning: There are exceptions to the information presented in this answer and it also may change in the future. The answer is meant to give a basic understanding but don't depend on it to be true without checking the behaviour for your specific version/use-case.
Originally QTP's FireEvent was supposed to call IE's non-standard fireEvent method.
On Firefox and Chrome this is implemented using the standard dispatchEvent. You should check which events the web site expects to get.
Things get complicated if you mix the event models (the standard DOM level 2 and Microsofts) as explained in this blog post.
I've had nothing but grief using Symbian's browser control on S60 3rd edition FP1. We currently display pages and many things are working smoothly. However, when inputting text into an HTML text field, the user will get a KERN-EXEC 3 if they move left at the beginning of the text input area (which should "wrap" it to the end) or if they move right at the end of the text input area (which should "wrap" it to the beginning).
I can't seem to trap the input in OfferKeyEventL. I get the key event, I return EKeyWasConsumed and the cursor still moves.
TKeyResponse CMyAppContainer::OfferKeyEventL(const TKeyEvent& aKeyEvent, TEventCode aType)
{
if (iBrCtlInterface) // My browser control
{
TBrCtlDefs::TBrCtlElementType type = iBrCtlInterface->FocusedElementType();
if (type == TBrCtlDefs::EElementActivatedInputBox || type == TBrCtlDefs::EElementInputBox)
{
if (aKeyEvent.iScanCode == EStdKeyLeftArrow || aKeyEvent.iScanCode == EStdKeyRightArrow)
{
return EKeyWasConsumed;
}
}
}
}
I would be okay with completely disabling arrow key navigation but can't seem to do this.
Any ideas? Am I going about this the wrong way? Has anyone here even worked with the Browser Control library (browserengine.lib) on S60 3.1?
Update: Interestingly, if I switch to use Cursor Navigation, it works fine. For now, this is a workaround. I'm still curious to know if there are ways to resolve this.
You would get quicker answer probably in http://discussion.forum.nokia.com/forum/.
Interestingly, if I switch to use Cursor Navigation, it works fine. For now, this is a workaround. I'm still curious to know if there are ways to resolve this. For now, I'm calling this the answer.
I'm doing some drag and drop js testing with selenium-client. It works (taking screengrabs before and after clearly show the elements to switch places), but I'm having trouble programatically asserting the change happened.
Am I mental, or can I not do something like:
selenium.assert_equal("css locator", "expected id of element")
which, in this case, would look something like:
selenium.assert_equal("css=li:nth-child(1)", "li#list_item_2")
Any tips on how to implement this would be great.
Thanks,
Adam
Edit: if I had selenium.get_element that would take a selector and return what it was, I could then perform the assertion in the next step.
i.e.
element = selenium.get_element("css=li:nth-child(1)")
assert_equal(element, "li#list_item_2")
(I think).
Your example won't work because you're comparing two strings that aren't equal. One way to assert that your element has moved would be to use isElementPreset as demonstrated below:
//before drag and drop
assertTrue(selenium.isElementPresent("css=#source li:nth-child(1)"));
assertFalse(selenium.isElementPresent("css=#target li:nth-child(1)"));
//drag and drop code here
...
//after drag and drop
assertTrue(selenium.isElementPresent("css=#target li:nth-child(1)"));
assertFalse(selenium.isElementPresent("css=#source li:nth-child(1)"));
This example uses the Java client API, but it should be easy to work out how to do it in your preferred client API. It will also depend heavily on your application, as the above will check that the element with id of 'target' has one child li element before the drag and drop, and none afterwards. If you have a snippet of your HTML source I might be able to prove a more robust example.