I'm new to active MQ.
I have a requirement to create a local Active MQ and connect it to a remote IBM MQ.
Can anyone help me on how to connect to Distributed Queue manager and Queues .
You can use Apache Camel to bridge between the two providers. The routes can be run from within the broker, pull from the ActiveMQ queue and push to the WMQ Queue (or the other way around). The concept is almost like the concept of a Channel in WMQ pulling from a transmit queue and pushing it to the appropriate destination on the remote queue manager.
Assuming you are using WMQ V7+ for all QMgrs and Clients, its simply a matter of learning how to set up the route and configure the connection factories. Older versions of WMQ and you may have to understand how to deal with RFH2 headers for native WMQ clients if they are the consumers.
The most simple route configured in spring would look like:
<route id="amq-to-wmq" >
<from uri="amq:YOUR.QUEUE" />
<to uri="wmq:YOUR.QUEUE" />
</route>
The "wmq" and "amq" would point to beans where the JMS components are configured. This is where you would set up you connection factories to each provider and how the clients behave (transacted or not for example), so I'll hold off on giving an example on that.
This would go in the camel.xml (or whatever you name it) and get imported from your broker's XML. ActiveMQ comes with several examples you can use to get you started using Camel JMS components. Just take a look at the default camel.xml that comes with a normal install.
Related
This is a follow-up question of How to implement HTTP request/reply when the response comes from a rabbitMQ reply queue using Spring Integration DSL?.
We were able to build the Spring Integration application and the SCDF stream successfully locally. We could send a http request to the rabbitMQ request queue which was bound to the SCDF stream rabbit source. We could also receive the response back from the rabbitMQ response queue which was bound to the SCDF stream rabbit sink.
We have deployed the SCDF stream into PCF environment which had a binding of an internal rabbitMQ broker. Now we need to specify the spring rabbitMQ connection information in the Spring Integration application properties - currently it's using the default localhost#5762, which is no longer valid. Does anyone know how to get this rabbitMQ configuration properties? We already checked the SCDF stream rabbit source/sink log files but couldn't find the information. I know we probably need to check internally whoever set up the SCDF/rabbitMQ in PCF environment, but so far we haven't heard the answers from them.
Also, it appears we can have a different approach that binds both the SCDF stream and the integration application to a separate rabbitMQ instance (instead of using the existing one bundled with the SCDF configuration). Is it a recommended solution?
Thanks,
It is unclear whether you're using the SCDF tile or the SCDF OSS (via manfest.yml) on PCF.
Suppose you're using the OSS, AFA. In that case, you are providing the right RMQ service-instance configuration (that you pre-created) in the manifest.yml, then SCDF would automatically propagate that RMQ service instance and bind it to the apps it is deploying to your ORG/Space. You don't need to muck around with connection credentials manually.
On the other hand, if you are using the SCDF Tile, the SCDF service broker will auto-create the RMQ SI and automatically bind it to the apps it deploys.
In summary, there's no reason to manually pass the connection credentials or pack them as application properties inside your apps. You can automate all this provided you're configuring all this correctly.
How can we store failed messages in VM Connector in MULE
Assume it is a transient flow .
Scenario is like when ever mule server is down and at the same time messages sent to publish connector.
what will be best way. Hope I am clear or bear with me for any confusion.
thanks
The VM connector works like a queue in memory, but it is not an external message broker like for example ActiveMQ or IBM MQ. The VM connector implementation is inside the Mule Runtime implementation. It can not be used to send messages to other Mule servers, nor other non-Mule applications. Also if the Mule Runtime instance is down, then it will not work at all so there is not way to publish nor receive messages. If you want that kind of reliability you need to use an external JMS message broker.
EDIT2: My issue here was caused by an insufficient understanding of how transport connectors work in ActiveMQ. TL;DR is that ActiveMQ will implicitly "transform" or "relay" messages between your transport connector configurations defined in activemq.xml.
EDIT: Additional info, the STOMP messages received by the Angular application are used for debugging and demo purposes. Hence, simply converting the OpenWire message to a blob of readable text is sufficient.
I'm creating an Angular application (preferably website, avoiding native applications), which objective is to "tap in" by web sockets on an ActiveMQ server and subscribe to OpenWire messages. How do I let ActiveMQ transform OpenWire messages to STOMP messages and send these to any clients (i.e. my Angular application) connected to the ActiveMQ WebSocket connector?
In addtiion, it would be nice-to-have if I could transform STOMP to OpenWire as well.
It must be Angular
Avoiding the use of native applications on the client-side is preferable although not a deal-breaker.
Adding extra processing stress on the ActiveMQ server must be done with caution.
To the best of my knowledge, it is only possible to let Angular "talk directly" with the ActiveMQ server by STOMP messages send by web socket, if I am to avoid using native applications.
I already have an Angular application capable of STOMP communication by web sockets (e.g. something like https://github.com/stomp-js/ng2-stompjs-angular7).
I am missing information on how to configure the ActiveMQ server to transform OpenWire-->STOMP through its transport connectors.
In my understanding, what I am trying to do should be possible. It is noted by other users but not how. E.g. users hint that what I want is possible in ActiveMQ but not Apollo: ActiveMQ to Apollo transition, Openwire to Stomp protocol configuration.
I expect (preferably) the need to use something like an ActiveMQ transformer (e.g. adding transformer to the connector configuration: AMQP & Openwire - Activemq broker and 2 different consumers) or maybe writing an ActiveMQ plugin (http://activemq.apache.org/developing-plugins.html). On ActiveMQ's website, an existing transformer is mentioned (http://activemq.apache.org/stomp.html Message Transformations section):
Currently, ActiveMQ comes with a transformer that can transform XML/JSON text to Java objects
... but no mention of how to use this and I am unsure if I can benefit from this and if this means that there are no transformers for OpenWire-->STOMP or vice versa.
I expect I might have misunderstood some of the concepts, and a "you're going in a wrong direction, do this instead" can work out as a good answer for me. At the time of writing, I expect I will have to create an ActiveMQ plugin using their Message Transformer interface (http://activemq.apache.org/message-transformation.html) although their sub links are 404. I hope to achieve a more simple solution, e.g. an existing OpenWire-->STOMP transformer:
<transportConnector name="openwire" uri="{some-openwire-uri}?transport.transformer=stomp"/>
ActiveMQ will "transform" any Openwire message into a STOMP message and vice versa as needed based on client connections. I an Openwire based JMS client connects and places a message onto a queue and a STOMP based client comes along and subscribes to that queue the message will be converted into a STOMP message to send to that client.
Without knowing more about what issue you are having it is hard to provide more insight than that though. There are some cases where the transformation from Openwire to STOMP might not yield exactly the right thing for you such as a MapMessage or StreamMessage and definitely an ObjectMessage so some care needs to be taken about cross protocol messaging.
You do of course need to add a transport connector for each of the protocols you want to support, Openwire, STOMP, AMQP etc. The clients need something to connect to, then once they connect the broker manages the message transformations amongst subscriptions on Topics and Queues.
The Consumer proxy is not picking up messages from queue. We have redeployed service and restarted servers. But it did not help. I am attaching logs in here.
<01-Mar-2019 10:39:53 o'clock GMT>
<01-Mar-2019 10:39:53 o'clock GMT>
According to Oracle support document 1573359.1:
CAUSE
The service has been re-deployed/changed while there were messaging being processed. Review Doc ID 1571958.1 "OSB SBConsole Activation - Limitations for configuration or deployment changes in production" for other reasons that this error can occur.
SOLUTION
Stop consumption on the jms queue, delete and re-deploy service.
Log in to Weblogic Console
Expand services -> Messaging -> JMS Modules -> Select the Queue your service is interacting with.
Select the Control tab
For both production and consumption, select pause.
Wait a short while (5 minutes) and restart the queue
Re-deploy your Proxy Services
If message still persist please check config.xml and make sure that there is a correct number of applications with name starting with "ALSB". The correct number depends on the kind of services you have deployed. JMS request-response, JMS plain request, JMS topic etc...
The easiest way to make sure that config.xml is correct is to do the following:
Delete all the JMS proxies from OSB configuration
Open WLS console go to "Deployments" and make sure that there are no application "_ALSB_xyz" deployed. If they are present delete them.
Re-deploy JMS proxies
Alternately, check Note 1382976.1 to locate the related deployments. Delete any application deployments starting with "ALSB" which are not related to any actively deployed JMS proxy service.
I'm working on a project where I have several war files inside a tomcat 7 have to communicate with a single embedded activeMQ (5.5.1) broker inside the same Tomcat.
I'm wondering what was the best practice to manage this and how to start and stop the broker properly.
Actually I try tu use a global JNDI entry in server.xml and in each war gets my activemq connection with a lookup. The first connection to the broker implicitly starts it. But with this method I run into various problems like instance already existing or locks in data store.
Should I use instead an additional war which uses a BrokerFactory to start the broker explicitly? In this case how to make sure that this war executes first in Tomcat ? And how do I stop my broker and where?
Thanks for the help.
from the docs...
If you are using the VM transport and wish to explicitly configure an
Embedded Broker there is a chance that you could create the JMS
connections first before the broker starts up. Currently ActiveMQ will
auto-create a broker if you use the VM transport and there is not one
already configured. (In 5.2 it is possible to use the waitForStart and
create=false options for the connection uri)
So to work around this if you are using Spring you may wish to use the
depends-on attribute so that your JMS ConnectionFactory depends on the
embedded broker to avoid this happening. e.g.
see these pages for more information...
http://activemq.apache.org/vm-transport-reference.html
http://activemq.apache.org/how-do-i-embed-a-broker-inside-a-connection.html
http://activemq.apache.org/how-do-i-restart-embedded-broker.html