How can I get aheap dump from a remote JVM which runs on linux with WL application server?
When I run locally on a windows machine I know how to get a dump. But, how do I get a dump from the user acceptance test server? Thanks in advance.
You can use JMX to connect to the remote application server (it should be enabled in advance) and use the HotSpotDiagnostic MBean which allows taking a heap dump.
You can use JConsole or VisualVM for invoking the MBean operation.
This post by Mike Haller describes how to use this method with JVisualVM.
Since its a *-nix system, and if you have the necessary privieleges, then it would be easy to connect to using SSH protocol:
Connect to the remote machine:
ssh user#remote-machine-ip-address
Enter the user password once prompted for it (it should be the one for the user on the remote machine and not your current system user).
Generate your heap dump using the jmap utility (JDK binaries path should be availble into your system PATH variable or use a full path to it):
jmap -dump:format=b,file=cheap.bin <pid>
There are three steps:
ssh to your server
ssh <your_user_name>#<remote_ip>
jmap to trigger memory dump
jmap -dump:format=b,file=<your_file_name> <your_jvm_pid>
visualize the heap by jhat (here 512m is the size limit, you can set it depends on the leak's file size, like -J-Xmx2g)
jhat -J-Xmx512m <your_file_name>
jhat -port 7401 <your_file_name>
I write a blog to help analyze performance issue: Performance Optimization
I've used Visual VM successfully for thread dumps and heap dumps, however, you don't list your JAVA version?
JAVA Visual VM is no longer shipped with JAVA, but can still be downloaded here and it's still being maintained. They just did a new minor release: October 19, 2021: VisualVM 2.1.1 Released.
VisualVM has also been distributed in Oracle JDK 6~8 as Java VisualVM.
It has been discontinued in Oracle JDK 9.
Here are steps for connecting to the VM from Dzone, VisualVM: Monitoring Remote JVM Over SSH (JMX Or Not)
For other alternatives, the Baeldung JAVA site, which has great information and tutorials, has A Guide to Java Profilers.
Related
I have got a storm cluster running and I want to monitor its performance. I followed this blog and was able to measure the number of tuples received by a bolt using codahale metrics and display it in graphite.
My goal is to deploy a storm cluster on a lightweight computer such as beaglebone and for that I need to be able to monitor JVM parameters such as CPU, thread and memory usage of each Worker Process.
I really like codahale metrics and would like to continue using it in my application. Can anyone direct me as to how I can measure JVM parameters separately for each worker using codahale metrics?
I would really appreciate it if someone posted an example of how to get jvm metrics using codahale metrics.
Thanks,
Palak
I found an excellent tutorial here. Works like a charm.
Using VisualVM and JMX we can get the CPU usage,GC activity, class loading information, Heap size & Used Heap statistics, All the Threads information with statistics,
CPU & Memory profiling, performance monitoring, Memory leaks of worker nodes. And also you can take heap dumps and thread dumps, profiler snapshots.
STEPS for setup
STEP 1: Staring VisualVM
Java VisualVM is bundled with JDK version 6 update 7 or greater. Navigate to your JDK software's bin directory and double-click the Java VisualVM executable.
Alternatively, navigate to your JDK software's bin directory and type the following command at the command (shell) prompt: jvisualvm.
STEP 2: Adding MBean plugin
For JMX monitoring you need to add MBean plugin explicitly.
1, Choose Tools > Plugins from the main menu.
2, In the downloaded Plugins tab, Click Add Plugins
3, Select the Mbean plugin
After successfully adding MBean plugin you can see MBean tab in VisualVM and you can monitor JMX.
STEP 3: Local Monitoring
By default VisualVM will monitor all the applications running on the local JVM. No need to do any changes if your using Java 1.6 and above.
STEP 4: Remote Monitoring
To retrieve and display information on applications running on the remote host, the jstatd utility needs to be running on the remote host.
Steps to run jstatd
The jstatd tool is an RMI server application that monitors for the creation and termination of instrumented HotSpot Java virtual machines (JVMs) and provides an
interface to allow remote monitoring tools to attach to JVMs.
1, create a file with "jstatd.all.policy" file name and copy the below content
grant codebase "file:${java.home}/../lib/tools.jar" { permission java.security.AllPermission ;};
2, copy "jstatd.all.policy" file in java bin (Java\jdk1.7.0_10\bin) directory
3, Navigate to your JDK software's bin directory and type the following command at the command prompt: jstatd -J-Djava.security.policy=jstatd.all.policy.txt
4, to run jstatd admin privileges required, then only all the other users can connect it remote host.
It’s one time activity. (Run with background process in CIT and SIT)
To add a remote host in VisualVM, right-click the Remote node in the Applications window,
choose Add Remote Host and type the host name or IP address in the Add Remote Host dialog box.
When Java VisualVM is connected to a remote host, a node for the remote host appears under the Remote node in the Applications window.
You can expand the remote host node to view the applications running on the remote host.
Use jvisualvm.exe jdk/bin and you can monitor storm workers.
Jvisualvm can also point to remote Storm topology.
Download and add mbean plugin into jvisualvm.
I want to monitor JVM performance on my production environment. I have installed only JRE, not JDK, Hence i can't use jstat, jconsole etc. to monitor the JVM performance.
Can somebody please help to understand how can i monitor JVM performance in this scenario?
Is there any way to achieve this?
(please note that i don't want to monitor it remotely through JMX or something else. i would like to install local agent in each machine which will send the metrics to server at the interval of 1 minute.)
Thanks,
KS
If you manage to get JMX up and running on your VM (from the comment), you can then use jmxterm or jmxfetch to push these JMX metrics into a metrics system (like graphite or Datadog).
If you have enough patience and time to write, you can probably have a look at JVMTI. You can write your code in C/C++ and run it along your Java Process and you can gather information about the JVM without affecting it.
Another simple and naive way is to start your VM with a javaagent written in java but JVMTI is even better than that. The most crucial difference between the javaagent and JVMTI app is derived from the loading mechanics. While the agents are loaded inside the heap, they are governed by the same JVM. Whereas the JVMTI agents are not governed by the JVM rules and are thus not affected by the JVM internals such as the GC or runtime error handling.
You can even give Java Mission Control a try if you're using JDK7 or above :)
Jolokia is a java agent you can use to expose JMX as http. Run jmx2graphite and get those metrics into Graphite. The link includes instructions on Graphite installation (10 minutes)
Our WebLogic Server takes 1 hr to startup using Jrockit JVM. It is pure Java EE app.
Is there any tool we can use to diagnose why it’s taking so long to start?
Is it Linux or Windows machine?
If it's Linux machine, you try to strace it. Ie strace -f -p <PID> and see where it's hanging. It can be due to many reasons, eg maybe because it's waiting for a DB connection.
But, I got a feeling that it may be due to the Persistence Filestore read during startup. That operation can be very slow if the file is very large. So, you may want to check your persistence filestore especially under <DOMAIN_NAME>/server/<SERVER_NAME>/data/store/defaults and other filestore from config/config.xml.
If they are too big, compact them (check the Oracle doc) or just delete them (if its not an important env & you are lazy)
Thanks.
Hi i am very new to Jprofiler & Linux.
I am trying to Monitor my Apache Tomcat server installed on a linux machine from Jprofiler remote profiling which is installed on windows machine. Kindly help me in the procedure in detail.
I tried all the Help i could get from google but still stuck..any help will is appreciated. Thanks in advance.
In any case, you should extract the JProfiler tar.gz file for Linux on the remote machine. No further configuration is required on the remote side. On the local side you need a full installation of JProfiler.
There are two ways to get remote profiling to work:
A. Attach to the running Tomcat process
Execute the command line utility bin/jpenable in the JProfiler distribution on the remote machine and select the Tomcat process. The JVM will then be ready for profiling. If the profiled JVM is not listed, execute jpenable as the same user that runs the Tomcat JVM. If that does help, use alternative B.
On the local machine, create a session of type "Attach to profiled JVM (local or remote)", specify the host name of the remote machine and the profiling port that was set with jpenable.
When you start session, the JProfiler GUI will connect to the remote machine and you will see profiling data.
B. Use the integration wizard
Execute the command line uutility bin/jpintegrate in the JProfiler distribution on the remote machine and select your application server and follow the subsequent steps.
Then, proceed as in alternative A. This option is actually preferable to alternative A and unless you have to profile an already running JVM, you should take this route.
I want to get a heap dump (suspected memory leak) of a certain Java process. However, when I start the jvisualvm tool, I cannot see any of the running Java processes.
I have Google'd around about this and have already found a couple of articles saying that you have to run the Java processes using the same JDK that you start the jvisualvm tool with in order for it to be able to see them. However, as far as I can see, this is already the case. I'm doing everything locally (I have remote access to the machine).
A couple of things to consider:
The processes are running on a firewalled Windows 2008 server
The processes are running using renamed versions of the JDK java.exe executable
As far as I can see the processes are running using the 1.6.0_18 JDK
One of the running processes starts an RMI registry
I'm waiting on a virtualized copy of the server so I can mess around with it (this is a production server). But in the meanwhile; any ideas as to why I cannot see any of the processes in jvisualvm (or jconsole for that matter)?
Well after I did a little research, it would appear that Peter's comment was correct. Because the JVM processes were launched by another user (the NETWORK SERVICE account because they were being started by a Windows service) they didn't show up in jvisualvm.
Workaround
Since I have access to the application configuration, I have found the following workaround, which involves explicitly enabling unsecured JMX for the target JVM:
Add the following JVM parameters:
-Dcom.sun.management.jmxremote.port=3333 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false
Add the remote process to jvisualvm using JMX by click File -> Add JMX Connection. You can connect to the process using port 3333. Obviously you can change the port if you want.
Link to article explaining this in a little more detail: http://download.oracle.com/javase/6/docs/technotes/guides/visualvm/jmx_connections.html
Notes
It's probably not a good idea to keep the JVM settings permanently, as they would allow anyone to connect to the JVM via JMX.
You can also add authentication to the JMX JVM parameters if you want to.
The simplest way is to execute jvisualvm as administrator (win: "run as administrator"). Which is not ideal but works. All java processes are visible then.