I am a Wix novice, first of all. I am trying to create an installer using Wix. I am using Visual Studio 2012 and I have Wix toolkit installed.
In my installer I have a version.ini file which contains the version information. During each build, the version.ini file will be updated. I need to create a folder using the version specified in version.ini and copy some files to that folder created during installation. I prefer the version.ini should not be deployed during installation.
I went through some threads here. What I got is since the version.ini file is present during build time, we need to use it rather than creating custom actions. But I don't know how.
Can someone help? I really appreciate if you could provide sample code.
Thanks,
ssn
Related
Copying of license files using Wix 3.10.2? We have a requirement where we need copy some license files after the installation of the webapplication to IIS. Copying of license files will be the last in the sequence. The license files will reside next to the burn (bootstrapper) setup.exe. This way we can control what license file need to be installed based on the user. I am trying to understand if there will be an issue with number of license files reside along with .exe? Is there a custom action to pick files that are not part of the msi or exe?
1) There will not be an issue with number of license files residing along with exe
2) Using the Media element without a Cabinet name you can specify that certain files will neither be inside a cab or embedded into the msi, no custom action needed. See http://wixtoolset.org/documentation/manual/v3/xsd/wix/media.html
You may need to be more precise about exactly when you want the copy to occur. Your original question says "after the installation" which implies that the install has finished and that your generated MSI is no longer running. but in a later comment you say "during the install".
If after the install is what you want, then you could add a custom executable to your Burn bundle that will do whatever you want. In many of these kinds of situations the application that needs the file just goes and gets it with help from the MSI saying where it was installed from, or by using the SourceList capabilities of Windows Installer to get the location.
If you want to copy files during the install then the CopyFile element is probably what you need. It has wildcard capability to define the files you want to copy. Your source location will be the SourceDir property and the destination will be one of your defined directories. Note that the files will not be uninstalled when the product is uninstalled.
WiX Copyfile:
http://wixtoolset.org/documentation/manual/v3/xsd/wix/copyfile.html
I had to use native bootstrap that comes with Visual Studio SDK. With the bootstrap you can also create pre-requisite like installing .net. This worked for my requirement. Also there is a msbuild task so that you can automate it. Used setup project to create msi and VS bootstrap to create setup.exe
We have a solution, there are about 100 hundred projects in it. And we have around 20 installers which we created with vdproj.
I need to create WiX projects, which would create .msi instead of vdproj. I used dark.exe to generate wxs file out of msi and got binaries out of it.
I successfully created an msi file and everything was good.
But then I started thinking about it. If some of these projects are changed, will those changes be applied to the application after rebuilding of wix project? Or wxs will be referencing the old version and to update it someone will have to rebuild vdproj project to create new msi, then use dark.exe again?
I am sorry for a stupid question, it's my first time using wix and working with installers in general.
Thank you in advance
You've started on the right track. The VDPROJ outputs are .msi files, so using dark to convert those to wxs files is the right thing to do. Now that you have your wxs files (the base source file to build wix deployments), you can do away with the VDPROJ projects in your solution and only update and use the wxs files (I believe WiX has a visual studio project template available as well).
You'll have to update you wxs files with new assemblies or deliverable files as your projects change.
It is better this way then doing a wildcard pickup (something you can't technically do with WiX, anyway) as having explicit control of what goes on the target machine is preferred. I've seen many cases where developers carelessly add a reference as build output that isn't needed, and sometimes that reference cannot be redistributed per the license agreement or other legalities.
Can someone help me understand how WiX works? I have a directory structure which I would like to create an installer for. I have generated the for the directory structure with heat.exe and when I build the setup project it generates an .msi file but I don't think it installs anything.
Maybe someone can walk me through the steps of generating a .msi installer.
Any advise is appreciated,
Thank you
If you're using Visual Studio:
Install the WiX Toolset V3 Visual Studio plugin.
Install the Wax interactive editor.
Build your project if you haven't already.
Add a new project to the solution containing the project you want to create an installer for.
Choose the template Setup Project for WiX v3.
Name the installer. A personal convention is the name of the project plus ".Setup"
A Product.wxs file will open up. Change the Manufacturer="" value to something like your company name or your name. Keep the file open.
Go to Tools -> WiX Setup Editor
On the left under Root Directory choose InstallFolder
Under Projects to install, choose the project you want to install.
In the red area to the right, you'll see a list of files. These are the output results of your build from step 3.
Click the plus sign next to files you want to copy. They should turn white and change to a Resolved state.
This might look daunting, but you're just telling it what to copy--which would be your project's executable, configs, dll libraries, and images it's dependent upon.
You typically want to copy everything. If there are dll's you know you don't need, it's better to remove them as a dependency from the Visual Studio.
Notice the Product.wxs has changed. It now has the files you checked off in the Setup Editor GUI added to the <Wix><Fragment><ComponentGroup> section. Save that file.
Close the Setup Editor.
Build the setup project you just configured.
Open Windows explorer and go to that project's bin/Debug or bin/Release folder, depending on what mode you built in. There you'll see the .msi that you can copy to where you need.
To make an update, make the necessary changes and then change the version number in that project's Properties -> Application -> Assembly Information. Then also change it in Product.wxs <Wix><Product.Version>. Then just build your setup project again.
Good tutorial here:
http://wix.tramontana.co.hu/
http://www.codeproject.com/Tips/105638/A-quick-introduction-Create-an-MSI-installer-with
They should get you started.
If you learn something about the MSI log that will also help - install the MSI with a command line that includes /L*vx
And "doesn't install anything" should be easy to check - are there are any files installed, or did it create an entry in Programs&Features?
WiX is a language (XML/XSD) that serves as a way of authoring (compiling) Windows Installer (.MSI) databases. WiX doesn't install anything, MSI does.
I maintain an open source project called IsWiX. The concept is simple. IsWiX provides additional WiX project templates (scaffolding) and graphical designers to assist you in creating installer. Then as you gain knowledge of WiX and MSI you can make additional tweaks of the WiX XML by hand and go beyond what IsWiX currently knows how to author.
Here's a video showing how to author, build and test an MSI to deploy an IIS website in a mere 3 minutes.
Update: IsWiX has tutorials now.
After a few 'false starts' trying to learn WiX from online tutorials I noticed that on http://wixtoolset.org/ there is a link to the book "WiX 3.6: A Developer's Guide to Windows Installer XML". You can buy it pretty inexpensively in E-book form from Packt, or also Amazon if you like the easy interface with Kindle.
I found this book to be VERY helpful with every little step regarding the .msi creation process. The book will guide you to create your first .msi in the very 1st chapter! Granted, you have to continue a little more to have a fully functioning .msi, but given the complexity of Wix, this book is terrific. It may not be for the gurus among us, but for those of us who need a little more help to understand the material it's wonderful. I've seen many posts speak to the 'steep learning curve' regarding WiX and it is a complicated process to create a valid .msi, but this book goes a long way toward making that learning curve very bearable.
If you are using the build system 'cmake', then you can use cpack to generate .msi file by setting the cpack generator to wix.
What worked for me best, was this fantastic tutorial video: https://www.youtube.com/watch?v=6Yf-eDsRrnM
Its best selling points for me was
independent of visual studio version
it describes deploying a .NET (Core) app also
it focuses on what an average app's installer should be capable of (including heat, icon, background image and banner)
you don't have to learn another layer on wix
it gives you good practices on easy package generation and future maintenance
it gives an installer project template which you can reuse: https://github.com/angelsix/youtube/tree/cecd38ea3d5eea11cc75fc0123297ffc3b5e662b/C%23%20General/Windows%20Installer%20Wix%20DotNet%20Core/ConsoleApp1.Installer
I've packaged my vb.net project with an installer project and installed it on my pc. Now, how can I make an update patch if I want to update my installed program? I'm using Microsoft Visual Studio 2010. I've tried to Google on this issue but instructions are unclear to me.
One way to do it is as follows:
If the installer package installs your application into the fixed location, i.e. when user can't select where to install, you can always have your update package go to that same location and replace your assemblies.
If the location is dynamic, your initial installation needs to leave some registry keys/values related to the location. Then your update package can get the location from the registry and replace the assemblies based on that data.
i have already an installer for our application. but it is exe-file. it was created many years ago.. application of course was updated. we used a bat-file to register new dll-files and to install our service(windows). but we want to do all this by installer not a bat-file. we chosen a wix techology. i read about <Patch> node, but to use it i need an msi from previous version.. i think to do a simple installer, that will stop service,copy and register dll in the installed application's directory, install service. but i don't know will it overwrite the files without any problems?
You can only create an MSP (Patch) for an MSI (Installer). Also, you're going to run into component ref counting problems if you install your components into the same directory as the original install. The problem is MSI will go to see a file is already there, make it as a shared resource and increment the usage counters. Then on uninstall it will decrement, see that it's not 0 and remove to uninstall the files.
I'd suggest installing to a new directory and then using the RemoveFile table to get rid of the old files. Also I'd suggest following good CM / Versioning practices so that you don't have to worry about hacks such as Version Lying.
If all your application just needs to xcopy files, setup a directory and maybe even a ShortCut, it should be a piece of cake.
Versioned files like executables will automatically be overwritten if the version of the file number is lower.
See also Copy if not exist in WiX.