When a Webhook is triggered, is there a way to get the org_id from which it was fired? (Aside from climbing up the triggered item)
The only solution I found so far is:
PodioItem::get($item_id); to get the space_id
PodioSpace::get($space_id); to get the full
PodioOrganization::get_for_url($attributes = array()); I get the org_id.
See the "Bundling responses using fields parameter" section at the very bottom of https://developers.podio.com/index/api on how you can use the fields query parameter to include more data. There's even an example that goes almost all the way for you (it walks up to the space level, but you can just tack the org onto it):
/item/{item_id}?fields=app.view(full).fields(space.view(full))
For podio-php you can do:
$item = PodioItem::get($item_id, array('fields' => "app.view(full).fields(space.view(full))"));
Use PodioItem::filter instead of PodioItem::get, I'm pretty sure that you'll have the expected results, so try this:
$item = PodioItem::filter($item_id, array('filters' => "app.view(full).fields(space.view(full))"));
Hope it helps!
Related
I'm missing something simple - I do not want to access the results of this query in a view.
Here is the query:
#adm = Admin.where({:id => {"$ne" => params[:id].to_s},:email => params[:email]})
And of course when you inspect you get:
#adm is #<MongoMapper::Plugins::Querying::DecoratedPluckyQuery:0x007fb4be99acd0>
I understand (from asking the MM guys) why this is the case - they wished to delay the results of the actual query as long as possible, and only get a representation of the query object until we render (in a view!).
But what I'm trying to ascertain in my code is IF one of my params matches or doesn't match the result of my query in the controller so I can either return an error message or proceed.
Normally in a view I'm going to do:
#adm.id
To get the BSON out of this. When you try this on the Decorated Query of course it fails:
NoMethodError (undefined method `id' for #<MongoMapper::Plugins::Querying::DecoratedPluckyQuery:0x007fb4b9e9f118>)
This is because it's not actually a Ruby Object yet, it's still the query proxy.
Now I'm fundamentally missing something because I never read a "getting started with Ruby" guide - I just smashed my way in here and learned through brute-force. So, what method do I call to get the results of the Plucky Query?
The field #adm is set to a query as you've seen. So, to access the results, you'll need to trigger execution of the query. There are a variety of activation methods you can call, including all, first, and last. There's a little documentation here.
In this case, you could do something like:
adm_query = Admin.where({:id => {"$ne" => params[:id].to_s},:email => params[:email]})
#adm_user = adm_query.first
That would return you the first user and after checking for nil
if #adm_user.nil?
# do something if no results were found
end
You could also limit the query results:
adm_query = Admin.where( ... your query ...).limit(1)
How would you return a list of records in a certain state with state_machine? Something along the lines of:
#locked = current_user.docs.locked?
Cheers.
EDIT
It seems like current_user.docs.with_state(:locked).all doesn't work either.
A simple current_user.docs.where(:state => "locked") worked, I just thought there'd be a better way.
In rails 3, I would like to do the following:
SomeModel.where(:some_connection_id => anArrayOfIds).select("some_other_connection_id")
This works, but i get the following from the DB:
[{"some_other_connection_id":254},{"some_other_connection_id":315}]
Now, those id-s are the ones I need, but I am uncapable of making a query that only gives me the ids. I do not want to have to itterate over the resulst, only to get those numbers out. Are there any way for me to do this with something like :
SomeModel.where(:some_connection_id => anArrayOfIds).select("some_other_connection_id").values()
Or something of that nautre?
I have been trying with the ".select_values()" found at Git-hub, but it only returns "some_other_connection_id".
I am not an expert in rails, so this info might be helpful also:
The "SomeModel" is a connecting table, for a many-to-many relation in one of my other models. So, accually what I am trying to do is to, from the array of IDs, get all the entries from the other side of the connection. Basicly I have the source ids, and i want to get the data from the models with all the target ids. If there is a magic way of getting these without me having to do all the sql myself (with some help from active record) it would be really nice!
Thanks :)
Try pluck method
SomeModel.where(:some => condition).pluck("some_field")
it works like
SomeModel.where(:some => condition).select("some_field").map(&:some_field)
SomeModel.where(:some_connection_id => anArrayOfIds).select("some_other_connection_id").map &:some_other_connection_id
This is essentially a shorthand for:
results = SomeModel.where(:some_connection_id => anArrayOfIds).select("some_other_connection_id")
results.map {|row| row.some_other_connection_id}
Look at Array#map for details on map method.
Beware that there is no lazy loading here, as it iterates over the results, but it shouldn't be a problem, unless you want to add more constructs to you query or retrieve some associated objects(which should not be the case as you haven't got the ids for loading the associated objects).
I am trying to retrieve data from a simple mySql table tbl_u_type which has just two columns, 'tid' and 'type'.
I want to use a direct SQL query instead of the Model logic. I used:
$command = Yii::app()->db->createCommand();
$userArray = $command->select('type')->from('tbl_u_type')->queryAll();
return $userArray;
But in the dropdown list it automatically shows an index number along with the required entry. Is there any way I can avoid the index number?
To make an array of data usable in a dropdown, use the CHtml::listData() method. If I understand the question right, this should get you going. Something like this:
$command = Yii::app()->db->createCommand();
$userArray = $command->select('tid, type')->from('tbl_u_type')->queryAll();
echo CHtml::dropdownlist('my_dropdown','',CHtml::listData($userArray,'tid','type'));
You can also do this with the Model if you have one set up for the tbl_u_type table:
$users = UType::model()->findall();
echo CHtml::dropdownlist('my_dropdown','',CHtml::listData($users ,'tid','type'));
I hope that gets you on the right track. I didn't test my code here, as usual, so watch out for that. ;) Good luck!
I use jqGrid to display data which is retrieved using NHibernate. jqGrid does paging for me, I just tell NHibernate to get "count" rows starting from "n".
Also, I would like to highlight specific record. For example, in list of employees I'd like a specific employee (id) to be shown and pre-selected in table.
The problem is that this employee may be on non-current page. E.g. I display 20 rows from 0, but "highlighted" employee is #25 and is on second page.
It is possible to pass initial page to jqGrid, so, if I somehow use NHibernate to find what page the "highlighted" employee is on, it will just navigate to that page and then I'll use .setSelection(id) method of jqGrid.
So, the problem is narrowed down to this one: given specific search query like the one below, how do I tell NHibernate to calculate the page where the "highlighted" employee is?
A sample query (simplified):
var query = Session.CreateCriteria<T>();
foreach (var sr in request.SearchFields)
query = query.Add(Expression.Like(sr.Key, "%" + sr.Value + "%"));
query.SetFirstResult((request.Page - 1) * request.Rows)
query.SetMaxResults(request.Rows)
Here, I need to alter (calculate) request.Page so that it points to the page where request.SelectedId is.
Also, one interesting thing is, if sort order is not defined, will I get the same results when I run the search query twice? I'd say that SQL Server may optimize query because order is not defined... in which case I'll only get predictable result if I pull ALL query data once, and then will programmatically in C# slice the specified portion of query results - so that no second query occur. But it will be much slower, of course.
Or, is there another way?
Pretty sure you'd have to figure out the page with another query. This would surely require you to define the column to order by. You'll need to get the order by and restriction working together to count the rows before that particular id. Once you have the number of rows before your id, you can figure what page you need to select and perform the usual paging query.
OK, so currently I do this:
var iquery = GetPagedCriteria<T>(request, true)
.SetProjection(Projections.Property("Id"));
var ids = iquery.List<Guid>();
var index = ids.IndexOf(new Guid(request.SelectedId));
if (index >= 0)
request.Page = index / request.Rows + 1;
and in jqGrid setup options
url: "${Url.Href<MyController>(c => c.JsonIndex(null))}?_SelectedId=${Id}",
// remove _SelectedId from url once loaded because we only need to find its page once
gridComplete: function() {
$("#grid").setGridParam({url: "${Url.Href<MyController>(c => c.JsonIndex(null))}"});
},
loadComplete: function() {
$("#grid").setSelection("${Id}");
}
That is, in request I lookup for index of id and set page if found (jqGrid even understands to display the appropriate page number in the pager because I return the page number to in in json data). In grid setup, I setup url to include the lookup id first, but after grid is loaded I remove it from url so that prev/next buttons work. However I always try to highlight the selected id in the grid.
And of course I always use sorting or the method won't work.
One problem still exists is that I pull all ids from db which is a bit of performance hit. If someone can tell how to find index of the id in the filtered/sorted query I'd accept the answer (since that's the real problem); if no then I'll accept my own answer ;-)
UPDATE: hm, if I sort by id initially I'll be able to use the technique like "SELECT COUNT(*) ... WHERE id < selectedid". This will eliminate the "pull ids" problem... but I'd like to sort by name initially, anyway.
UPDATE: after implemented, I've found a neat side-effect of this technique... when sorting, the active/selected item is preserved ;-) This works if _SelectedId is reset only when page is changed, not when grid is loaded.
UPDATE: here's sources that include the above technique: http://sprokhorenko.blogspot.com/2010/01/jqgrid-mvc-new-version-sources.html