I am trying to build mpich 3.1.3. in a Mac OSX 10.10 Yosemite with Xcode 6.1 and intel compilers icc and ifort version 15.0.0 20140716. I get an error when I am building the installation. The error is the following:
GEN lib/libpmpi.la
ifort: command line warning #10006: ignoring unknown option '-force_load,src/mpl/.libs/libmpl.a'
ifort: command line warning #10006: ignoring unknown option '-force_load,/Users/alejandrodelacallenegro/Downloads/mpich-3.1.3/src/openpa/src/.libs/libopa.a'
ifort: command line warning #10006: ignoring unknown option '-force_load,src/mpi/romio/.libs/libpromio.a'
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ranlib: object: lib/.libs/libpmpi.a(initthread.o) malformed object (section contents at offset 0 with a size of 1056, overlaps Mach-O headers at offset 0 with a size of 768)
I do not understand where the error come from, from the compiler or from libtool. I have also attached the outputs of the configuration and the build steps.
I finally found the cause of the problem. libtool was somehow corrupted, so I install it again, and then I don't get this error anymore. I have install Xcode again, but I suppose that installing it from macports, homebrew or from source solves the problem as well.
Alex
Related
I'm on a Mac X1, Monterey.
I've installed prophet and run into this issue when trying to fit a model.
RuntimeError: Error during optimization: console log output:
dyld[90668]: Library not loaded: #rpath/libtbb.dylib
Referenced from: /Users/{username}/opt/anaconda3/lib/python3.9/site-packages/prophet/stan_model/prophet_model.bin
Reason: tried: '/private/var/folders/cd/dfrqgp4s4ll55cwb7rtgccbw0000gq/T/pip-install-rjpuj450/prophet_d7e4cce10e414c89a572fe3605ae9269/build/lib.macosx-11.1-arm64-cpython-39/prophet/stan_model/cmdstan-2.26.1/stan/lib/stan_math/lib/tbb/libtbb.dylib' (no such file), '/private/var/folders/cd/dfrqgp4s4ll55cwb7rtgccbw0000gq/T/pip-install-rjpuj450/prophet_d7e4cce10e414c89a572fe3605ae9269/build/lib.macosx-11.1-arm64-cpython-39/prophet/stan_model/cmdstan-2.26.1/stan/lib/stan_math/lib/tbb/libtbb.dylib' (no such file), '/usr/local/lib/libtbb.dylib' (no such file), '/usr/lib/libtbb.dylib' (no such file)
I know this has to do with the wrong paths being searched. I can find the dylib in
/Users/{user}/opt/anaconda3/lib/python3.9/site-packages/prophet/stan_model/cmdstan-2.26.1/stan/lib/stan_math/lib/tbb/
But, it seems prophet doesn't know to look there. I'm curious how I can update/fix either the rpath variable or find another solution?
I tried to create a symbolic link with sudo ln -s, but don't have permissions on the laptop.
TIA!
I got it to work on Apple Silicon (M1 Max in my case) by installing older versions of both pystan and prophet:
pip install pystan==2.19.1.1
pip install prophet==1.0
The other important piece of the puzzle is that you should use Python 3.8 to get it working.
Installing older versions of the libraries and using Python 3.8 are both talked about in issue #2002 on Github, but there's not really an explanation of the libtbb.dylib error message.
Hey I'm a newbie cocos 2d x developer, I'm just trying to get a "Hello World" project created in XCode for iOS. From the terminal I'm using the command
cmake ../.. -GXcode -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos
I keep getting these two errors and the xcode project file does not generate.
CMake Error at cocos2d/cmake/Modules/CocosConfigDepend.cmake:94 (endmacro):
Flow control statements are not properly nested.
Call Stack (most recent call first):
cocos2d/cmake/Modules/CocosBuildSet.cmake:43 (include)
CMakeLists.txt:42 (include)
What am I doing wrong?
see attached screenshot
[1]: https://i.stack.imgur.com/cIiNC.jpg
System Specs:
MacOS Big Sur 11.4 (Virtual Machine via VMware)
cocos2d-x-4.0
cocos Console 2.3
Xcode 12.5.1
Python 2.7.16
cmake 3.21.0
CMake 3.14+
Xcode 10+
Visual Studio 2019
Android Studio 3.4+，NDK r19c+
Need https://github.com/leetal/ios-cmake
Try this
enter code here
$mkdir build_ios
$cd build_ios
$cmake .. -GXcode -DCMAKE_TOOLCHAIN_FILE=../ios.toolchain.cmake -DENABLE_ARC=FALSE
$open test.xcodeproj
The default is iOS device project, and platform parameters such as
os.toolchain.cmake support -DPLATFORM=SIMULATOR64 need to be added when adjusting to simulator. Please refer to its documentation
Under Xcode 8 symbolicatecrash to analyse crash report failed with:
sh: /Applications/Xcode.app/Contents/Developer/usr/bin/xcrun: No such file or directory
## Warning: can't find tool named 'otool' in iOS SDK, falling back to searching the Mac OS X SDK
sh: /Applications/Xcode.app/Contents/Developer/usr/bin/xcrun: No such file or directory
Error: can't find tool named 'otool' in the macosx SDK or any fallback SDKs at /usr/local/bin/symbolicatecrash line 115.
how to solve it?
Are you looking for the new location of symbolicatecrash in XCode 8?
Now it is located at /Applications/Xcode.app/Contents/SharedFrameworks/DVTFoundation.framework/Versions/A/Resources
find /Applications/Xcode.app/ -name symbolicatecrash
then, you will get
/Applications/Xcode.app/Contents/SharedFrameworks/DVTFoundation.framework/Versions/A/Resources/symbolicatecrash
I'm doing my first steps with Qt and QtWebEngine on an embedded board (i.MX6), using Yocto. Using provided example recipes, like the quicknanobrowser, works nicely on the target. So I can't confirm this answer which claims that WebEngine is not available on embedded platforms.
Now I want to write my own QML application and deploy it on the board. With the recipe meta-toolchain-qt5 I created an SDK and installed it. In QtCreator I set all paths to the SDK installation and tried to build it, but got this error:
Project ERROR: Unknown module(s) in QT: webengine
11:13:13: The process "/opt/poky/1.8/sysroots/x86_64-pokysdk-linux/usr/bin/qt5/qmake" exited with code 3.
It turned out that WebEngine was not included in the SDK. Thanks to this answer, I fixed that by putting the following to my own packagegroup-qt5-toolchain-target.bbappend file:
RDEPENDS_${PN} += " \
qtwebengine \
qtwebengine-qmlplugins \
qtquickcontrols-qmlplugins \
qtwebengine-examples \
"
Then reinstalled the SDK. Now it seems that all WebEngine files are available in the SDK installation (the zsh glob pattern below matches all directories in any subdirectory of /opt/poky/1.8/, which contain "webengine", case-insensitively):
% ls -1 -d (#i)/opt/poky/1.8/**/*webengine*(/)
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5/QtWebEngine/
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5/QtWebEngine/5.4.3/QtWebEngine/
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5/QtWebEngineWidgets/
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5/QtWebEngineWidgets/5.4.3/QtWebEngineWidgets/
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/lib/qt5/qml/QtWebEngine/
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/share/qt5/examples/webengine/
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/share/qt5/examples/webenginewidgets/
/opt/poky/1.8/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/share/qt5/translations/qtwebengine_locales/
Still, I get the same Unknown module error. This is independent of QtCreator, and can also be shown by directly calling qmake:
% source /opt/poky/1.8/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi
% /opt/poky/1.8/sysroots/x86_64-pokysdk-linux/usr/bin/qt5/qmake /home/me/test/test.pro -r -spec linux-oe-g++ CONFIG+=debug CONFIG+=declarative_debug CONFIG+=qml_debug
Project ERROR: Unknown module(s) in QT: webengine
The project itself should be fine, because it compiles and runs without problems on the Desktop installation.
Any ideas? Are there maybe still some files missing in the SDK? Where does qmake search for the modules? How can I tell qmake where to find the WebEngine installation?
In /opt/poky/1.8/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi
add sh /opt/poky/1.8/sysroots/x86_64-pokysdk-linux/environment-setup.d/qt5.sh
This will set up the Qt5 environment.
I'm trying to debug an objective C program. It used to run, and I'm not sure what changes could have broken it, but it no longer runs at all. In the debugger, I now get:
.
.
.
unable to read unknown load command 0x80000022
unable to read unknown load command 0x80000022
unable to read unknown load command 0x80000022
Program loaded.
sharedlibrary apply-load-rules all
run
Error calling thread_get_state for GP registers for thread 0x16131lx506^error,msg="error on line 207 of \"/SourceCache/gdb/gdb-908/src/gdb/macosx/i386-macosx-nat-exec.c\" in function \"fetch_inferior_registers\": (os/kern) invalid argument (0x4)\n"
I've seen several places that claim te explain the 1st warning, but none of them seem appropriate. Nothing online claims to explain the error.
Any clues as to what these errors mean in conjunction?
ETA: I just upgraded to 10.6, so it may have started then, although I'm compiling to target 10.4...
Is this relevant? From the Xcode release notes:
Note: GCC 4.2 cannot be used with the
Mac OS X 10.4u SDK. If you want to
build targets using the 10.4u SDK on
Xcode 3.2, you must set the Compiler
Version to GCC 4.0