I have a big problem in my vb.net.
I created application using vb.net and Dev component, it was working 100%, but after I upgraded my operating system from Windows 8 pro to Windows 8.1 pro, VS2012 and dev component installed I faced a big problem.
I can't use the GUI to edit most of control during design, its looks like it is a part of the form, and can't be selected, as per the below photo.
And for new controls on new forms (Dev Forms) it can't appear in form to be edited, it shown in the bottom area as per the below photo
Solution I have only Dev Ver.11 full:
1. Un-install Dev Ver.11
2. Install last dev trial ver12.
3. Open VS2012.
4. Uninstall dev ver.12
5. Re-install dev Ver.11 again, activate, enjoy.
Related
I am running a free version of VS 2019 Enterprise to test the Record function but when I click the 'Start Recording' button I get the bellow popup.
I have restarted my computer multiple times and added a new Coded UI Test Builder project in VS. I have also repaired the version that I have and am still facing the issue.
Any ideas on how to resolve this issue are appreciated.
Running Visual Studio Enterprise 2019 - 16.11.10
popup about reboot required
I'm encountering the following
System.Runtime.Remoting.RemotingException error when I create a blank
Windows 10 Universal Application...
Following are event viewer screens...
I have checked online for other solutions and have already done the
following...
Uninstall/Repair Visual Studio 2015 Update 1
Reset my Windows 10 PC 1511 update
Cleared the Designer/ShadowCache folder
Target environment has been set to x86/x64
Target framework set to 10240
Developer mode enabled
Updated graphic drivers
Have cleaned and rebuilt solution
Updated to VS15 Update 2
Please let me know if you have been able to find a solution to the above
UWP applications fail to launch from Visual Studio if project location and Windows Store apps installation path are on a non-default drive. Also, the XAML Designer will crash if you install Visual Studio and Windows Store apps to a non-default drive
Windows 10 allows users to change the default storage location of Windows Store applications. If you select a non-default drive for your apps, and if you install Visual Studio 2015 onto this drive, the XAML designer will not start and Windows Store app projects built on this drive cannot be run from Visual Studio.
Note: the workaround below will make any Store apps installed to the secondary drive inaccessible until next restart.
The file system driver can be temporarily disabled by running the following command from an admin command prompt:
fltmc detach filecrypt :
This will enable both running apps from this drive as well as usage of the XAML designer until the machine is restarted.
For a longer term fix, move your app or Visual Studio install to your system drive, or a secondary drive that has never been the storage location for Windows Store apps.
I had the same problem. I started visual studio as an administrator and the designer came back.
You might want to try to clear the XAML Designer Shadow Cache. I've fixed al sorts of ailments with this process.
Its been a few months but I have finally been able to get the XAML Designer to work.
As #peterfaraday mentioned, the XAML Designer only works if you install Visual Studio on the System Drive (C: in my case) instead of using any other drive.
After uninstalling Visual Studio keep the following things in mind...
If your system partition is small, look to increase the space as the installation can take a lot of space based on the components selected.
If you had already installed VS on any other drive, while reinstalling you will not be able to change the default installation directory.
This is because your initial path of installation was saved as in the registry. I tried solving this issue by following these steps. In my case I had found multiple keys in the registry and hence "Reset this PC" (Windows 10) by allowing only for my personal files to remain. This cleared out all the registry keys and I was able to install VS back on the C: drive, resulting in the XAML Designer finally working (Please note that resetting your pc will remove any applications installed on your machine)
I got the same problem months ago. I Cleared the cache and Rebuild the solution. I got success.
I've created a C++ UWP Windows 10 app using Visual Studio 2015. However, I'm not able to visualize any xaml in the designer because I'm always getting a System.NullReferenceException error. How can I fix this?
That's very odd but I solved following these steps:
Close any instance of Visual Studio
Open Visual studio and create a new C# UWP empty project (name it as you like, do not matter)
Run the "useless" created project then close it as Visual Studio
Open again your previous C++ UWP project
In my case everything started working!
Switching solution platform to x86 worked for me.
I'm experiencing exactly the same problem on my primary development machine but not on another. The reason is... I think... When I installed Visual Studio 2015 on the 2nd machine, the first time I created a Universal Solution (C#) I was shown a dialog asking me to OK "elevated permissions" (custom permissions) for the VS2015 installation folder. I OK'd it and Designer works on that machine in both Blend2015 and VS2015 (community edition)
On the other machine I was never shown the dialog asking me to confirm elevated permissions and Designer does NOT work on that machine (VS2015 Enterprise). This machine also has VS2013 update 5) on it.
I am thinking that I might have to completely wipe off VS2015 and try to clean the registry of all VS2105 references AND remove the VS2015 installation directories on C:\ AND when I reinstall, create a installation directory with a different name (if I can). What a PAIN though... I'm waiting to see if MS delivers a simple solution since I'm quite positive that this whole issue boils down to a bug (feature... grrr) having to do with custom permissions that can't be changed (or added) after installation.
Would be nice is MS would confirm this...
(please note, none of this involved c++... it was all C#)
Tom
this is the dialog I was shown on the machine where Designer works]1
Installing the Windows Software Development Kit (SDK) for Windows 10 solved the issue for me. It may ask to unistall the previous version of Windows 10 RTM SDK
https://developer.microsoft.com/en-us/windows/downloads/windows-10-sdk
This is fixed in Update 1 of Visual Studio 2015
https://www.microsoft.com/en-us/download/details.aspx?id=49989
I am developing a Windows 8 Store app. Till sometime back I could see the Tile of the app once I built and ran the Solution from Visual Studio.
However, very recently Visual Studio 2012 seems to have stopped creating the Tile to launch my application in the dev environment. I have to use Application Search to bring up the App shortcut and launch (outside the debugger).
Only recent change in my environment is the Update 1 installation.
Why has Visual Studio stopped creating the Tile or did I mess something up?
Environment:
Windows 8 Pro (x64)
Visual Studio Express 2012 Update 1
If you have un-pinned it from your start screen, it will be in your All Apps, you need to re-pin it. Most likely you just un-pinned rather than un-install.
Same here but I press Uninstall on my app.
Result :
My app is missing from "All apps".
App also cannot create any new/second icons/tiles.
Any new metro app have same problems
I manage to fix it by deleing folder(s) in (this is not good solution. must be another way to restore App):
"C:\Users\UserNameHere\AppData\Local\Packages\"
In the Windows 8 Start screen, I noticed that there is an Uninstall icon that appears at the bottom if you right-click on an app. For the apps that I developed, if I click on the Uninstall icon, it opens the "Programs and Features" dialog. Ideally it should instead directly launch my uninstaller. Does anyone know how to do that? Is there some registry key I need to set to associate Start Menu shortcuts with uninstallers?
I use various technologies to make my apps (e.g. Qt, C#, Visual Studio setup projects, NSIS). On Windows 7 and below, my installers put shortcuts in the Start Menu. On Windows 8, those shortcuts are displayed as a little square in the Start screen. So that shortcut is the object I am right-clicking on. Is there some way to add uninstall data to the shortcut file itself?
Tiles for desktop applications do not automatically uninstall like tiles for store applications. Choosing 'Uninstall' for a desktop applications tile launches the Add / Remove programs experience as you pointed out. This is by design.