I am getting the following error:
Could not find a base address that matches scheme https for the endpoint with binding WSHttpBinding. Registered base address schemes are [http].
I was not getting this error on IIS 6
Any ideas on how to solve this issue?
IIS 6 allows the wcf application to run with bindings of http alone.
IIS 7 gives this error. I had to add a dummy certificate to the IIS 7 configuration to get it to work.
Related
I am deploying my asp.net core site on Local IIS and binding is
http//localhsot:{portnumber} but the website is not running and giving me error
HTTP Error 404.4 - Not Found
The resource you are looking for does not have a handler associated with it.
Detailed Error Information:
Module IIS Web Core
Notification MapRequestHandler
Handler Not yet determined
Error Code 0x8007007b
Requested URL http://localhost:9001/
Physical Path D:\Deploy\Stagging - Copy
Logon Method Anonymous
Logon User Anonymous
But when my binding is
https//localhsot:{portnumber}
web site runs fine
why this is happening I don't want to run the site on Https
It seems that there is already a binding rule binding your localhost domain name and HTTP protocol.
If you just installed the IIS service and it will create a default site automaticly and bind your 80 port.
Try removing the default website and try again.
And try not set the HTTP host name of your binding and just leave it empty. When you leave the host name empty it will bind all incomming requests from the port.
The difference between IIS http binding and https binding is that HTTP binding is based on the host header in the HTTP request and the https binding is based on SNI. Now your https binding is working fine so it is possible that your HOST name settings caused this issue.
I have developed a sample WCF service and hosted in IIS 8.5, Windows Server 2012 R2. Note that this server is added to F5 load balancing setup (I do not know the details of this setup) and I am supposed to invoke this service using the URL https://loadbalanceddomainname/servicename.svc.
In the IIS, I have made the below configurations:
Created a new website
Created a Self Signed certificate with the subject name "loadbalanceddomainname" and imported to the Personal store.
Bind this certificate to this website on port 443, and host header is set to "loadbalanceddomainname".
With this configuration, when I try to browse the URL https://loadbalanceddomainname/servicename.svc, it gives me a 504 Error (as shown in Fiddler -> "
[Fiddler] ReadResponse() failed: The server did not return a complete
response for this request. Server returned 0 bytes.
")
However, in IIS, if I add one more binding to Port 80 with host header "loadbalanceddomainname", I get the response as shown in the screenshot below.
Though I am able to invoke this service using Https (as shown in address bar) in the browser with the port 80 binding added to IIS, I see that it is getting changed to http as shown in the screenshot below where it says "svcutil.exe http://loadbalanceddomainname/servicename.svc". Why is this https getting changed to http? Why is my service giving 504 error when I remove the Binding at Port 80?
Though I get a response in the browser (with port 80 binding in server), when I try to invoke an operation using a test client (by adding a service reference in Visual Studio and creating a proxy), I get error 404 - no such endpoint exists. The WCF trace log shows the below error as well:
Failed to lookup a channel to receive an incoming message. Either the
endpoint or the SOAP action was not found.
I also have noticed that the certificate I have Bind in IIS is not what I see i the browser, in the above screenshot - when I view the certificate details. Is this a different certificate coming from F5 or somewhere in between?
I think you are dealing with this metadata issue. when client tries to access the service over https, it still gets redirected to http because of soap: address location.
https://blogs.msdn.microsoft.com/dsnotes/2014/10/03/ssl-offloading-in-load-balancer-scenario/
I have a MSCRM website set up in IIS 7.5 in which I have configured the following host headers under bindings:
1)crm
2)crm.mydomain.com
I'm trying to access the OrganizationData.svc. I have configured added the following to Web.config of the CRMWeb app
<serviceHostingEnvironment>
<baseAddressPrefixFilters>
<add prefix="http://crm/"/>
</baseAddressPrefixFilters>
</serviceHostingEnvironment>
This works if I access the service using the following URL: http://crm/MSCRMDEV/XRMServices/2011/OrganizationData.svc/
but it does not work if I use the FQDN http://crm.mydomain.com/MSCRMDEV/XRMServices/2011/OrganizationData.svc/
I tried adding "http://crm.mydomain.com/" as another prefix in the config, right below the entry I have added for "http://crm/" but WCF throws the following error:
This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. If your service is being hosted in IIS you can fix the problem by setting 'system.serviceModel/serviceHostingEnvironment/multipleSiteBindingsEnabled' to true or specifying 'system.serviceModel/serviceHostingEnvironment/baseAddressPrefixFilters'..
I followed the suggestions here and added multiplesitebindings="true" but that did not help either. I also looked at this sugestion but there is no node in the Web.config of the CRM web app so not sure if I can add this section in
Can this be accomplished. From what I have read WCF has issues working with more than one http host header(added in the IIS Bindings).
Assigning multiple bindings for one scheme is not supported. See http://technet.microsoft.com/en-us/library/hh237635.aspx (also valid for none IFD environments)
The Web site should have a single binding. Multiple IIS bindings, such as a Web site with an HTTPS and an HTTP binding or two HTTPS or two HTTP bindings, are not supported for running Microsoft Dynamics CRM.
I am having trouble hosting a simple WCF service application in IIS 5.1 (XP SP3).
I follow this Pluralsight tutorial (https://www.youtube.com/watch?v=SVPXLF-g4Ws) but still the service won't load and shows IE blank page "You are not authorized to view this page .. HTTP Error 403 - Forbidden "
any advice? how to host WCF service in IIS 5.1.
Try changing the IIS Authentication for your IIS host website to "Anonymous" and see if that is where your problem is and if doing this makes it work.
NOTE: In reality, you will need to set your authentication in IIS based on whatever your authentication method is going to be.
Question:
Are there known issues making calls to a service that calls another service from Silverlight?
Scenario:
I have the following 3 projects:
SilverlightClient - Silverlight project with a Button
SilverlightClient.Web - A web application that hosts the SilverlightClient.xap.
BackEnd - A different web application that hosts the FOO Service which does some special backend processing.
I have created a Silverlight WCF-Enabled web service in both SilverlightClient.Web and Backend. These are respectively SilverlightClientService and BackEndService.
From SilverlightClient.Web I add a service reference to BackEndService. I have a test ASPX page that I've written code that calls BackEndService successfully.
From SilverlightClient I add a service reference to SilverlightClient.Web's SilverlightClientService. If my SilverlightClientService returns plain data, such as a string, it works quite well.
The moment, however, that I change SilverlightClientService to call BackEndService, I get the following exception:
HTTP 415 - "The request failed with HTTP status 415: Unsupported Media Type."
I had an issue with 2 services not communicating. We finally figured out that using Cassini (the built in Visual Studio IIS) to host the ListenerService 'BackEnd' was causing the problem. Switching the project to start in a virtual directory of IIS allowed the two to communicate.
I was seeing : An error occurred while receiving the HTTP response to http://localhost:1484/MainListenerService.cs. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details. and this error:
The HTTP request was forbidden with client authentication scheme 'Anonymous'.
Are you using basicHttpBinding? Silverlight only supports basicHttpBinding but the default when you create a WCF service is wsHttpBinding. You should change that on your web.config before adding the reference on your Silverlight project. Check out this video from Tim Heuer: http://silverlight.net/learn/videos/all/how-to-consume-wcf-and-aspnet-web-services-in-silverlight/