In tightVNC, there is a transfer file dialogue that lets you manually move things between the remote and local systems. I would like to write a script that lets me perform actions on the remote computer and then in the end save directly to the local system (so I can then have the script pick up the file on the local system and proceed onward without user intervention). To do this, I would need some kind of logical address extension to put in the save as dialogue on the remote computer that will address it to the local computer, ie StuffForConnection::C:\LocationOnLocalComputer\filename.txt or something similar. Alternately, I would need a way to tell the server to send the file across once it was saved on that system.
I am using Sikuli to operate the remote system, as what I am running is a closed source GUI based piece of software, so I am entering directly into the save as box. Is there a way to do this?
There is no automated way to do this, short of running a separate FTP between the systems.
Related
Currently I am working on the development of CATIA by C++ and Automation Interface. Everything is based on local environment of every client machine. After updating our program, clients have to deploy it manually after receiving the updated one.
We are considering if there is a way we could put our program on the server, and we assign the authorizations to the specific clients to access it. They still need install CATIA in their local machine, but our customization programs are on the website.
Our program is based on COM component, so this is a priority.
Any feasible idea?
Thanks in advance.
I'm developing programs for Catia too (VB .NET) and there might be a solution to use webbrowser to manage the programs but I'm unable to help with that :)
Instead what I use is selfdeveloped feature which updates the tools exe files on client from network storage or FTP.
Think of it as algorithm which searches certain folders or storage and decides if the program should update itself and lets the user know. Then you run the updater which is not part of the tool (separate program) and he make the changes on the main exe (copy files, config, remove add etc.)
This way you don't have to take care of the deployment and the user only clicks the update. That's it :)
I want to read the content of a text file (serves as a key) stored inside a USB mass storage automatically when the user is authenticated by his matching username and password for that website. It's like the textfile(key) is the extended authentication.
I think this needs to can be done by a (1) native program? or an (2) applet? What do i need to study? Can someone give me an overview for the process to make this possible?
Quite good in web tech but not with native app.
You cannot access USB mass storage devices through chrome.usb as they are claimed and handled by the host operating system.
Instead you could use the chrome.fileSystem API, but the user will need to select the file. Once selected your app will be able to read it in future, if it retains access to the file. See the API documentation for more details.
If you want this only for Internet Explorer, You can create an Active X. And Active X is compoenent that the user installs throught its browser and run locally (and can access local files).
Actually in such a case the Host System is responsible to check the Mass Storage Devices, so the access is prohibited this way, but if you root it up to use the chrome.fileSystem.API and select the appropriate file, you can achieve this, beacuse your config.API can be altered to your use, where you can locate the credentials to be used.(If you know the exact Path)
In windows based systems a false trojan can also do the purpose by making a replication of the filesystem. Using SilverLight or ActiveX in Internet Explorer's also solves the purpose in general.
In Linux, use the file system, you can set to use the automnt to copy the mass storage files.
Why not try building a .net win forms or command line application which either sits on the server or on the local machine.
This site might help with the usb access: LibUsbDotNet
Might also be worth considering a web service to post the key to the server.
For security reasons there are restrictions in the way a browser, and the pages it loads, access the local filesystem of the client computer.
Is it safe to assume you only require this to work on a specific browser? As Ben said, please share more details about your requirement for a more comprehensive solution
Here's what I want to be able to do:
Run a program on my local computer which logs in to a citrix server (using citrix receiver or doing so in a similar way), on the server in the citrix session open a web browser, load a website, and then bring the html of that site back out of the citrix session and onto my local computer. Bascially I want to get data out of a citrix remote session.
How can I do this programmatically?
I'm fine with whatever programming language/modality you are comfortable in answering the question using.
I've looked a little into the citrix apis but while I find some things about logging in and even sending keystrokes and mouse clicks I found nothing about obtaining data. I could just log in and then use a program like wireshark to get the information, but I'm guessing it's all encrypted (plus then I wouldn't be doing my task all programmatically). I know of at least one open source program which seems to be able to replace a citrix reciever/client (openthinclient.org) but before I got digging through all its source code to try to answer my question I thought I'd ask here in case someone had an easier answer.
If all you want is to automate the task, is having the program act as a citrix client necessary?
I assume you don't have install privileges inside your citrix session, so are unable to install one of the many automation tools available (such as http://docs.seleniumhq.org/)?
Given the above...
If you have/allow java on your local machine, have a look at http://www.sikuli.org/
The main difference between this and other automation tools I've come across is that Sikuli uses the image on screen to navigate the gui, rather than grabbing calls to the widgets (which wont work in a citrix session).
So, assuming you can take a screenshot of your citrix session, it could be useful to you.
My MS access database is located here :
http://192.168.202.1/dbname.mdb
Other computer in LAN network have VB.net s/w installed.
How do I connect to this db?
Thanks in advance :)
Actually, your terminology you using is wrong. You don't connect to a word file. You don't connect to a power point file.
So you have to keep in mind here you are not really connecting to some text file or mdb file that just happens to be sitting on a hard drive.
You are thus simply opening a file.
I mean it is silly to say we connect to a word file, or we connect to a Power point file. So in the case of the office suite and those basic simple files that resides on the disk drive?
We are talking about plane Jane windows file.
A horse is a horse is a horse.
A file is a file is a file.
So you don't connect to the jpg file sitting on the hard drive, you OPEN the jpg file. So if you talking about your current setup it best to use the correct terminology here. You are not connecting to that Access mdb file, but are in fact opening a plane Jane windows file. If you look close at your connection string, it will ALWAYS have a fully qualified windows path name in it that resolves to a file sitting on a folder.
So if you place that file on some server, say web server, then then you still faced with having to open that windows file. This is NOT ANY different then wanting to open a power point file. That means if you going to connect over the internet then you need to EXTEND the windows file system (this means you will need some kind of VPN). At the end of the day, if you cannot use windows networking to brwose and open the folder where that file resides, then you cannot open that file with Access (or more specific in your case the JET data engine).
So for example, if the server where the file resides is a non windows box, say Linux, then you need to "add or use" or "install" the windows file and networking system on that box. A common choice in Linux is to install and run Samba on that computer.
Keep in mind that in the case of using SQL server, then you are connecting to a SERVICE running ON THAT server. In this case then you not opening a file on the remote box, but are simply using a socket (tp/ip) connection to some service. So you not just opening a silly old windows file that happens to be a mdb file on that system in this case.
So as such when you use FTP or http, these are not real "windows" networking systems that allow you to open + use a plane Jane windows file.
So as such, just keep in mind the concept here that you are NOT connecting to some file, but you are just going to OPEN the file.
You need to be able to OPEN the file, and you need to be using the windows networking system to do this open file in the case of Access. I mean, you don't have to install Access(JET) on the target computer. You don't have to install Power Point on the target computer to open a power point file. So you are ONLY opening a file that just happens to be on some other computer.
As such, your path name of http: is not allowed since that is now using http, and not windows file/networking system. As such a path name has nothing to do with windows networking and opening of a simple file sitting on the hard disk. So HTTP or FTP etc. are not based on windows networking and file system.
I don’t think this basic concept is too hard to grasp, but at the end of the day the concept you need to grasp and learn is that when you open a windows file sitting in a folder on the hard drive, then then will you need the windows file system to open such files. The idea and concept of opening a file in a folder might be new to you, but it is a basic requirement and understanding you need to solve this issue.
As noted, you can consider a VPN, but I explain why such a setup is not going to work in this article:
Using a wan with ms-access? How fast, how far?
http://www.kallal.ca/Wan/Wans.html
I suppose another possibility would be to consider the new web publishing ability that Access has. In the following video note how I switch to running the Access application 100% in the browser. The resulting application does not need any ActiveX or Silverlight. So the web pages run + work fine on my smartphone and even my iPad.
http://www.youtube.com/watch?v=AU4mH0jPntI
So you can use the new web publishing feature, and that would allow one to use http: to use the application.
I have couple of machines on which I wish to schedule exceutions. I need to access these machines remotely for exceution. Whenever I start exceution from these machines and minimize the session my script fails. So just curious to know whether QTP scripts can be executed while keeping sessions minimized. If yes what changes needs to be made in script. Thanks.
When you minimize this window, the operating system switches the remote session to a GUI-less mode and does not display windows and controls. As a result, the tests are unable to interact with the tested application’s GUI as the GUI doesn’t actually exist in this case.
You need to change Registry keys on your computer (that is, the computer from which you connect to a remote QTP workstation). Here is a step-by-step description:
Close Remote Desktop sessions opened on your computer.
Click Start and select Run. In the Run dialog box, type regedit and press Enter. Registry Editor starts
Locate any of the following Registry keys:
HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\
(if you want to change the RDC settings for your user account)
-- or --
HKEY_LOCAL_MACHINE\Software\Microsoft\Terminal Server Client\
(if you want to change the RDC settings for all accounts)
Create a new DWORD value in this key named RemoteDesktop_SuppressWhenMinimized. Specify 2 as the value data.
That’s all. Now minimizing the Remote Desktop Connection window on your computer will not affect the remote computer’s GUI and the GUI will still be available to your automated GUI tests.
This was taken from: http://blog.smartbear.com/post/10-10-11/testcomplete-tip-running-tests-in-minimized-remote-desktop-windows/
The problem you're facing is that if you minimize your display the remove machine knows that it doesn't have a display and ignores any questions about control locations and requests to move the mouse. In some cases QTP runs tests using device replay which means that the test will fail.
To work around this you need to have the remote machine think that it still has someone attached to it. One way is (obviously) to not minimize or close the remote desktop session. Another way is to use a remote access program that doesn't inform the remote machine when it's minimized a free example of such program is VNC, if I remember correctly you can even close the VNC session (not just minimize it) and the test will still run successfully.