Not sure how else to specify the path to the image.
I've added a png into a new image named "StatusBarIcon", which lives inside "Images.xcassets" resource folder.
I see they put a json file and what not.
Tried to do what the examples out there say, but no matter what I try, I always get nil as the output of [NSImage imageNamed:#"name of paths attempted here"]
Won't load using the full path either, I suppose the method is looking for the name of the image, but I've no idea how to specify the name correctly it seems, or perhaps I need another method?
Here are screenshots of my code, and my project.
Make sure you have the project set to use xcassets instead of just individual resource files. Once you create an image in the xcasset, you should just specify the name of the image, not the path. For example, [NSImage imageNamed:#"StatusBarIcon"]
To load from the assets catalog of the current bundle, use something like:
let image = Bundle(for: type(of: self)).image(forResource: NSImage.Name(“logo"))!
Related
In my application i am binding several properties to a custom user control, and everything works fine, except the images are not showing. For binding i have used the following codes:
Categories.Add(new Models.Category { Name = "Pizza", Count= 4, ImageUri = new Uri("Images/pizza.png", UriKind.Relative) });
I have also tried with different urikinds but the images are never showing.
what could go wrong? The images are in my solutions Images folder.
Use the ms-appx URI scheme:
ImageUri = new Uri("ms-appx:///Images/pizza.png");
Take care to really write ///.
Also make sure that the Build Action of the image file is set to Content, as pointed out in the other answer. Setting Copy to Output Directory does however not seem to be necessary.
Be sure you set the properties of the image so that it is available during runtime. Sometimes if employing Design Time data in Blend, you will see the images in Design Time, but then nothing during run time. The reason is that the images were never deployed with the rest of the solution. Be sure the Build Action on each image is set to Content and I usually set the Copy to Output Directory to Copy if Newer.
My question is about the application bundle in a project. I was reading about that and can understand some basic things (I'm not a native english speaker). I can understand that the resources folder is used to hold the files that will be used in the project, e.g. media files (images, audio, video, etc.) and should be in the application bundle to be identified.
So, what is the point if I want to use images and another resources in my project? In my other related question, I can't use them by referencing with NSImage imageNamed:.
I have used the following with no success loading my files:
NSBundle methods
imageNamed:#"string" with/without file extension
the images are in resources folder
I'm learning Cocoa and Objective-C, and of course this is different to C++ or Java when I want to create an ImageIcon or a QImage.
I may not have completely understood the issue, so correct me if I am wrong. I believe the problem has to do with your image's target membership or how you're retrieving the image in your code.
Adding an image to your project target will appropriately copy the resource at compile time. To add the image to your target, select it in the file navigator and then reveal the Utilities Panel. On the Utilities Panel, select the File Inspector Tab. Look for the Target Membership section and ensure that the image is selected for the desired targets:
Do you mean that you can't use the NSImage imageNamed: method to retrieve resources? If so, you can retrieve the resource like this (from the main resource bundle):
NSString *imageName = [[NSBundle mainBundle] pathForResource:#"image1" ofType:#"png"];
NSImage *imageObj = [[NSImage alloc] initWithContentsOfFile:imageName];
It also looks like you already have a good answer to your other related question.
I need some help for my OS X program.
I need the URL of a file inside the supporting files.
I have an array in which I save URLs from images and add them to a table view and if no images are chosen I want to add a question mark image (it is called "bild.jpg")
This bild.jpg is inside the supporting files but for later use I can't just save the name of the image because the array stores also URLs.
I need to have the URL of that image in the supporting file because it's easier to use the array for image initialization.
Is there a function to get the path or is there a standard path to the supporting files? I already search on the net but couldn't find anything that could help.
You seem to be talking about the application bundle and its resources directory rather than, say, a subdirectory in ~/Library/Application Support/..., in which case you probably want something like:
[[NSBundle mainBundle] URLForResource:#"bild" withExtension:#"jpg"]
(See the documentation for NSBundle.)
This might be a hard thing to do , but
I have to save whats appears on the screen in some moment, to a file.
but not just a file, i need to save it to my assets folder:
my goal is that i can later use the image without the:
dirPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
docsDir = [dirPaths objectAtIndex:0];
but just to use it like it was on my assets, just to use: #"myImage.png" , when myImage is the image that i have already saved from my print screen .
any direction on how to do that ?
thanks .
AFAIK, you can't save it to app bundle.
I suggest you to write your own methods to load an image like [UIImage imageNamedCustom:...].
It would be nice if this method will search image in assets first, if not found try to load from Documents or Caches. Also, it may cache path to saved images. After that you can replace all occurences of "[UIImage imageNamed:" to "[UIImage imageNamedCustom:" and other similar methods.
Your app's main bundle is part of the app, and is read-only. You can't add or remove content from it on the device. You're going to have to save that image to one of the directories in your app's sandbox, like Documents or Library/Caches.
Instead of +[UIImage imagedNamed:], perhaps +[UIImage imageWithContentsOfFile:] would work for you?
What you are saying, if I understand correctly, is that you want to save part of a drawing on your screen in an image (which is easy) and want to retrieve that later from your application bundle (I presume you mean that instead of the term assets). This can not be done, because the application bundle is read-only at runtime.
Our graphic designer is sending us .PNGs named appropiately "hide_00~iphone.png", "hide_00#2X~iphone.png" etc
He is exporting the images from after effects. I add them to the project and try to load them into an array on init. An exception is thrown each time for all of his files. Now, if I go in AND RENAME the files in the finder to exactly the same name, everything compiles fine. I have no idea what's going on here. Xcode cannot find them in the file system until I rename them. But the name is EXACTLY the same as what he sent me. I checked for white space around his file naming but everything looks fine.
Does anybody know if After Effects puts weird header info in the images? Or does this sound familiar at all to anyone. There are a whole bunch of images we are working with and I would hate to have to rename them by hand.
So I just used imageNamed and the image loaded just fine. So obviously your routine to load the image by path/name is flawed. You can post that and it can be evaluated - but this has nothing to do with 'After Effects'.
EDIT: For the record, my system is Lion Xcode 4.4.1 and my project set for iOS 5.1. I took your file from dropbox, and verified that in my project I CAN load the image as you are trying to do:
for (int i = 6; i < 7; i++) {
NSString *path = [NSString stringWithFormat:#"hide_step_seq_%02d", i];
UIImage *image = [UIImage imageWithContentsOfFile:[[NSBundle mainBundle] pathForResource:path ofType:#"png"]];
NSLog(#"PATH %# image=%#", path, image);
}
2012-09-13 07:15:23.241 Searcher[58114:f803] PATH hide_step_seq_06 image=<UIImage: 0x6a4cb30>
So, where to go from here? I've tried to help several people here who get burned by the #2x or ~iphone suffixes. For some reason a few people cannot ever seem to get this to work - all I can think of is there is some flag deep in the system that gets toggled and there is no way to untoggle it.
My suggestion is to try using the actual complete file name - try appending ~iphone and see if that works.
You can also in Terminal do a 'ls *.png | od -c' before changing the name and afterwards, to verify that absolutely the characters are the same.
The last thought I have on this is that files have many attributes: creation time, last access, last modiied, extended attributes, permissions, etc. It is possible (while unlikely) that for some reason one of these values blocks the system from attempting to use the ~iphone suffix.
I really wish I could help you further. If you want to put a simple little project together that does nothing more than tries to open a few images and it fails, zip the whole project up, put on dropbox, I'd be more than willing to run it on my system to try and duplicate the problem. You can also do as I did in the code above and verify that path looks good and the image is nil.