I'm not going to post a bunch of code here since I do not think it is a code issue.
Here is a link to my original question where I have shown the code if you are interested. Code
Just as a test I created a blank form window (Form1.vb) and no code gets passed to it and no code runs when it opens. If I do Form1.Show() from a MenuStrip Control or a Button Control, the window opens and stays on top. Now if I do Form1.Show() from a TreeView Control, the window opens and goes behind the window with the TreeView Control.
So my question is, what is different about the TreeView opening a form vs a button or other control?
I am using the basic VB TreeView Controll, and the new form is being called in AfterSelect method for the TreeView.
The AfterSelect works if you use your keyboard navigation to select a node, but it doesn't work when you use the mouse because the mouse capture is forcing the parent form to remain in focus. You would have to run your code after the AfterSelect event:
Private Sub TreeView1_AfterSelect(sender As Object, e As TreeViewEventArgs) _
Handles TreeView1.AfterSelect
Me.BeginInvoke(New Action(Sub()
Dim f2 As New Form2
f2.Show(Me)
End Sub))
End Sub
Use the Form.Show(parentForm) option, this will always put the new form on top of the old one.
have you tried Form1.ShowDialog() ? or if you don't want to show it as a dialog you should use:
Form1.Show()
Form1.BringToFront()
Related
I have problem about close() or dispose() function with my barcode reader (Windows Embedded Compact 7). In this case I can only hide() form.
I tried to show Form2 as dialogue but after I clicked the close button (to hide this form and go back to Form1) It made all of my application close
In Form1 (Main):
Public Sub showForm2()
Dim secForm As New Form2
secForm.ShowDialog()
End Sub
In Form2:
'close button
Private Sub closebt_Click(ByVal sender As System.Object,ByVal e As System.EventArgs) Handles closebt.Click
Me.Hide()
End Sub
Form can't be hidden if it is shown as Dialog. If you want to hide the form then use form.show() rather than form.ShowDialog(). Also here is a link
http://www.vbforums.com/showthread.php?759061-How-can-i-hide-my-second-form-dialog-without-bliking-form-not-closing-my-first-form
Go to properties page of the project. In the Application tab, there is a setting:
Shutdown mode
When startup form closes
When last form closes
Choose "When last form closes" to prevent closing the application when your main form closes.
in the index form add in form closing the fallow code:
Form1.Dispose()
Disclaimer: I only have beginner to slightly intermediate experience with VB.net
Hello, I was tinkering around with some design ideas for a project and I ran into a problem that I haven't found a solution to. I have a win form with some buttons and a panel. When the user presses a button, a border-less form is loaded into the panel. The problem is this: when the main form is closed, Visual Studio does not stop debugging, presumably because the forms in the panel are not disposed of.
Win Form image
The instance of the panel form is declared in the button click event. How can I destroy that instance from another sub? If I click another button, the first panel form doesn't go away. Is there a better way to accomplish this? I'm still learning, so I'm often not aware of all the different ways to solve a problem. Thanks everyone!
Public Class frm_Clients
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim search As New Search
search.TopLevel = False
search.Dock = DockStyle.Fill
Panel1.Controls.Add(search)
search.Show()
End Sub
Private Sub frm_Clients_FormClosed(sender As Object, e As FormClosedEventArgs) Handles Me.FormClosed
' What should I write here?
End Sub
End Class
Here's a snippet of what to do to close the windows when another button is pressed.
For Each form In Panel1.Controls.OfType(Of Form).ToList()
form.Close()
Next
Then I would suggest that you set search.Owner to the Form holding the Panel. That means that when the Owner is closed, so are the children.
search.Owner = Me
I have an issue that I cannot seem to overcome.
In my application, I have a custom class that loads a form into a panel upon startup. Then when I click a button on my main form I show the panel as visible revealing the form to the user.
My problem is that I want to be able to hide the panel when a user clicks outside of it (back onto the main form).
so far I have tried Form_Deactivate, Form_Leave, Form_LostFocus, Panel_Leave and Panel_LostFocus events but nothing will seem to trigger an event consistently to hide the panel. The only thing that works is if the user clicks inside the form (on a listview control) once the form is visible and then clicks outside of the form.
Is there anyway I can ensure this event gets called everytime whether the user clicks the form or not?
So far my code looks something like:
Public Class cls_UserObjects
Private frm As frmUsers
Public pnl As Panel
Public Sub ShowUserPanel()
Try
frm = New frmUsers
frm.TopLevel = False
pnl.Controls.Add(frm)
frm.Show()
frm.Focus()
....
End Class
Then in my main form I call the code below to build the form into the panel:
class_Users.pnl = pnlUsers
class_Users.ShowUserPanel()
And pnlUsers.Visible = True to show it to the user
I just can't seem to close it. I understand that Panels don't support the LostFocus properly, however, I can't find away around this. Maybe it has something to do with how I am opening my form/panel but I was advised to use classes to open forms so I can have more control over the controls within my forms from outside calls.
Any help appreciated. Thanks
MouseLeave event works, the panel hides immediately once it leaves the panel.
Private Sub Panel1_MouseLeave(ByVal sender As Object, ByVal e As System.EventArgs) Handles Panel1.MouseLeave
Panel1.Visible = False
End Sub
I have 2 forms on my application. I have the main form that opens TopMost, CenterScreen and Maximized. Then I have another form on this screen that pops open when I press a button. That second screen has a button that navigates to another screen, so when I press that button the second form closes, and the main form is suppose to close as well and the selected sheet open up.
However, the second screen closes fine, but my main screen remains open and active, while the called sheet opens but does not enable. I track down what was happening and the issue is that form all code runs, but the main screen does not seem to want to close. Here is my code:
Private Sub btnOpenDashboard_Click(sender As Object, e As EventArgs) Handles btnOpenDashboard.Click
Dim welcomeForm As New frmWelcomePage
If lblReportTitle.Text = "Employee Dashboard" Then
Me.Close() 'This works
welcomeForm.Close() 'This one remains open and active
Globals.dsbEmployeeBoard.Select() 'This one opens but is not enabled
End If
End Sub
I assume from your description that you already have a welcome form created and displayed before the form with the button is displayed.
This line of code:
"Dim welcomeForm As New frmWelcomePage"
is creating a new copy of the Welcome Page and closing it.
Instead of creating a new one, you need to reference the original one that is open.
If I recall correctly, you should be able to just remove that line and use frmWelcomPage.Close.
You need to pass a reference of your first form (Form1) to the second form (Form2), so that in the second form you can close the first form, like this:
Public Class Form2 Inherits Form
Private _form1 As Form1
Public Sub New(form1 As Form1)
Me.Form1 = form1
End Sub
End Class
Private Sub btnOpenDashboard_Click(sender As Object, e As EventArgs) Handles btnOpenDashboard.Click
If lblReportTitle.Text = "Employee Dashboard" Then
_form1.Close()
End If
End Sub
Then when you instantiate Form2, you would pass a reference to Form1, like this:
Dim form2 As New Form2(Me)
Note: Me is the instance of Form1.
Is there a simple way to Activate the form when any controls in the form is clicked like datagirdview, panel, menustrip, button, textbox, label, etc....
it happens that my project can show many different form and it's hard for me to activate one form when it's on the back of the active form. I need to clicked the border of the form to activate it.
most likely your problem arises because your form is MDI child.. you'll have to click the menu bar to activate the form.. but if you have a borderless form, clicking on controls wont activate the form.. again, this usually happens on MDI but it shouldnt happen on a regular winform.. unless you have other running events in the background that interferes with the process.
You question is not clear at all, and I don't know what you are trying to archieve, but for executing something with a click event you have to add the handler for every control.
If you are declaring it not dinamically just:
Private Sub ControlsClick(sender As Object, e As EventArgs) _
Handles Panel1.Click, Button1.Click, TextBox2.Click ' etc.
Me.Activate 'Or Whatever
End Sub
You have to add the handler for each control. The same if you do it dinamically:
Private Sub InitializeClickHandlers(sender As Control, Optional bChilds As Boolean = True)
For Each elem As Control In sender.Controls
AddHandler elem.Click, AddressOf ControlsClick(elem, New EventArgs)
If bChilds AndAlso elem.Controls.Count > 0 Then
Call InitializeClickHandlers(sender)
End If
Next
End Sub
Then, for every control in the form, you call it like: Call InitializeClickHandlers(Me)
Or, for every control inside a panel: Call InitializeClickHandlers(Panel1)