Client/Server application with VB.NET [closed] - vb.net

Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 8 years ago.
Improve this question
I have a problem in my VB.NET server/client chat application.
The problem happens when I send some information from the client application to the server application. I successfully established the connection and sent a message, but instead of showing that message, it's showing the name of my form server.
Public Class Form1
Private Server As TCPControl
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
Server.IsListening = False
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Server = New TCPControl ' fires new sub
txtChat.Text = " :: SERVER STARTED :: " & vbCrLf
AddHandler Server.MessageRecived, AddressOf OnLineRecived
End Sub
'da se uspijesno prenesu informacije na kontrolu
Private Delegate Sub UpdateTextDelegate(ByVal tb As TextBox, ByVal txt As String)
'UPDATE TEXTBOX
Private Sub UpdateText(ByVal tb As TextBox, ByVal txt As String)
If tb.InvokeRequired Then 'HERE I SEE MY MESSAGE FROM CLIENT APLICATION
tb.Invoke(New UpdateTextDelegate(AddressOf UpdateText), New Object() {tb, txt})
Else
If txt IsNot Nothing Then tb.AppendText(Text & vbCrLf)
End If
End Sub
Private Sub OnLineRecived(ByVal sender As TCPControl, ByVal data As String)
UpdateText(txtChat, data) 'HERE I SEE MY MESSAGE FROM CLIENT APLICATION
End Sub
End Class
Public Class TCPControl
Public Event MessageRecived(ByVal sender As TCPControl, ByVal data As String)
'SERVER CONFIG
Public ServerIp As IPAddress = IPAddress.Parse("192.168.1.108")
Public ServerPort As Integer = 46555
Public Server As TcpListener
Private CommThread As Thread
Public IsListening As Boolean = True
'CLIENTS (samo ce prihvatiti jednog klijenta)
Private Client As TcpClient
Private ClientData As StreamReader
Public Sub New()
Server = New TcpListener(ServerIp, ServerPort)
Server.Start()
CommThread = New Thread(New ThreadStart(AddressOf Listening))
CommThread.Start()
End Sub
Private Sub Listening()
' CREATE LISTENAR LOOP
Do Until IsListening = False
' ACCEPT INCOMING CONNECTIONS
If Server.Pending = True Then
Client = Server.AcceptTcpClient
ClientData = New StreamReader(Client.GetStream)
End If
'RAISE EVANT FOR INCOMING MESSAGES
Try
RaiseEvent MessageRecived(Me, ClientData.ReadLine) ' now is displying the name of server form
Catch ex As Exception
End Try
'REDUCE CPU USAGE
Thread.Sleep(100)
Loop
End Sub
End Class

There is an error when you update client TextBox on UpdateText.
If tb.InvokeRequired Then
tb.Invoke(New UpdateTextDelegate(AddressOf UpdateText), New Object() {tb, txt})
Else
If txt IsNot Nothing Then tb.AppendText(Text & vbCrLf) ' Here
End If
Change Text with txt.
If txt IsNot Nothing Then tb.AppendText(txt & vbCrLf)

Related

VB LAN Messenger having issues

I have made a small LAN messenger and I tried it with two pc's and it didnt work however running two of the applications with one listening to port 40004 and writing to 40005 and one listening to 40005 and writing to 40004 works.
The problem seems to be in the sendb_click where I send the message. It says Receipent not connected.
Error message:
System.net.sockets.socketexception (0x80004005); No connection could be made
because the target machine actively refused it 127.0.0.1:40003
at system.net.sockets.tcpclient..ctor(string hostname,int32 port)
at messenger.form2.sendb_click(object sender, eventargs e) in
D:\Messenger\Messenger\Form2.vb:line 97
:Interface
When connected you can choose a computer that is connected to the network on the right and message it. Im planning on having generated ports or whatever but for testing ive just made 40004 and 40005 the ports.
What is going wrong? Do i have to port forward or something?
below is my code
Imports System.Net.Sockets
Imports System.Threading
Imports System.IO
Imports System.Net.Dns
Imports System.DirectoryServices
Public Class Form2
Class entity
Public name As String
Public ip As String
Public port As Integer
End Class
Public reciepent As New entity
Public user As New entity
Public CLient As New TcpClient
Public listener As New TcpListener(40003)
Private Sub Form2_Load(sender As Object, e As EventArgs) Handles MyBase.Load
usernametb.Text = user.name
FindingThreats()
getmyip()
ipl.Text = user.ip
user.port = 40003
portl.Text = user.port
' listener = New TcpListener(40004)
Dim ListThread As New Thread(New ThreadStart(AddressOf Listening))
ListThread.Start()
End Sub
Private Sub Listening()
listener.Start()
End Sub
Sub FindingThreats()
UsersL.Items.Clear()
Dim childEntry As DirectoryEntry
Dim ParentEntry As New DirectoryEntry
Try
ParentEntry.Path = "WinNT:"
For Each childEntry In ParentEntry.Children
Select Case childEntry.SchemaClassName
Case "Domain"
Dim SubChildEntry As DirectoryEntry
Dim SubParentEntry As New DirectoryEntry
SubParentEntry.Path = "WinNT://" & childEntry.Name
For Each SubChildEntry In SubParentEntry.Children
Select Case SubChildEntry.SchemaClassName
Case "Computer"
UsersL.Items.Add(SubChildEntry.Name)
End Select
Next
End Select
Next
Catch Excep As Exception
MsgBox("Error While Reading Directories : " + Excep.Message.ToString)
Finally
ParentEntry = Nothing
End Try
End Sub
Sub getmyip()
For Each ip As Net.IPAddress In
GetHostEntry(GetHostName).AddressList
user.ip = ip.ToString
Next
End Sub
Sub getip(strhostname As String, returnip As String)
Try
returnip = GetHostByName(strhostname).AddressList(0).ToString()
reciepent.ip = returnip
Catch
MsgBox("This user is Offline.")
End Try
End Sub
Private Sub ListBox1_SelectedIndexChanged(sender As Object, e As EventArgs) Handles UsersL.SelectedIndexChanged
CUL.Items.Clear()
CUL.Items.Add("Connected Users:")
Dim ip As String
Dim hostname = UsersL.SelectedItem.ToString
getip(hostname, ip)
reciepent.port = 40004
Timer1.Enabled = True
CUL.Items.Add(user.name)
End Sub
Private Sub Label2_Click(sender As Object, e As EventArgs) Handles Label2.Click
Me.Close()
End Sub
Private Sub SendB_Click(sender As Object, e As EventArgs) Handles SendB.Click
Try
CLient = New TcpClient("127.0.0.1", 40004) 'reciepent.port)
Dim Writer As New StreamWriter(CLient.GetStream())
Writer.Write(ChatB.Text)
ChatL.Items.Add("> " & ChatB.Text)
Writer.Flush()
Catch
MsgBox("Receipent not connected.")
End Try
End Sub
Private Sub Timer1_Tick(sender As Object, e As EventArgs) Handles Timer1.Tick
Dim message As String
If listener.Pending = True Then
message = ""
CLient = listener.AcceptTcpClient()
Dim Reader As New StreamReader(CLient.GetStream())
While Reader.Peek > -1
message = message + Convert.ToChar(Reader.Read()).ToString
End While
ChatL.Items.Add("< " & message)
End If
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
FindingThreats()
End Sub
Private Sub Form2_FormClosing(sender As Object, e As FormClosingEventArgs) Handles MyBase.FormClosing
listener.Stop()
Me.Close()
End Sub
End Class

Send and receive data from a websocket server using sockets in Vb.net

i am new to network programming and would really appreciate your help to receive and send data to a server. I am trying to Use Sockets to Send and Receive data from a server which is developed using WebSockets.
Until now i have created the following Code which i think is wrong: in this code i am trying to send data on a normal thread but receive data on a different thread so that the program dont go on hold.
as i send data to the server, after some time i get this text reply on the textbox in which i am trying to receive the server response:
HTTP/1.1 501 Not Implemented
Any help will be much appreciated
TCPControl class(handles the connection, send and receive matters)
Public Class TCPControl
Public client As TcpClient
Public DataStream As StreamWriter
Private ReceiveData As StreamReader
Private comThread As Thread
Public isListening As Boolean = True
Public Event MessageReceived(sender As TCPControl, Data As String)
Public Sub New(Host As String, Port As Integer)
Try
client = New TcpClient(Host, Port)
DataStream = New StreamWriter(client.GetStream)
comThread = New Thread(New ThreadStart(AddressOf Listening))
comThread.Start()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
End Sub
Private Sub Listening()
Do Until isListening = False
If client.Connected = True Then
ReceiveData = New StreamReader(client.GetStream)
End If
Try
RaiseEvent MessageReceived(Me, ReceiveData.ReadLine)
Catch ex As Exception
End Try
Thread.Sleep(10)
Loop
End Sub
Public Sub Send(Data As String)
DataStream.Write(Data & vbCrLf)
DataStream.Flush()
End Sub End Class
Form1 class(handles form load and other stuff)
Public Class Form1
Private client As TCPControl
' Private receiveClient As TCPControlReceive
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
' client = New TCPControl("174.129.224.73", 80)
client = New TCPControl(GetIpAddress("echo.websocket.org").ToString, 80)
If client.client.Connected Then Label1.Text = "Connected"
'receiveClient = New TCPControlReceive
AddHandler client.MessageReceived, AddressOf OnLineReceived
End Sub
Private Delegate Sub UpdateMessageDelegate(TB As TextBox, txt As String)
Private Sub UpdateText(TB As TextBox, txt As String)
If TB.InvokeRequired Then
TB.Invoke(New UpdateMessageDelegate(AddressOf UpdateText), New Object() {TB, txt})
Else
If txt IsNot Nothing Then
TB.AppendText(txt & vbCrLf)
End If
End If
End Sub
Private Sub OnLineReceived(sender As TCPControl, Data As String)
UpdateText(txtReceive, Data)
End Sub
Private Function GetIpAddress(address As String) As IPAddress
Dim ips As IPAddress()
ips = Dns.GetHostAddresses(address)
Return ips(0)
End Function
Private Sub SendMessage()
If client.client.Connected = True Then
client.Send(txtSend.Text)
End If
End Sub
Private Sub Form1_ContextMenuStripChanged(sender As Object, e As EventArgs) Handles Me.ContextMenuStripChanged
If client.client.Connected = True Then
client.DataStream.Close()
client.Client.Close()
End If
client.isListening = False
End Sub
Private Sub btnSend_Click(sender As Object, e As EventArgs) Handles btnSend.Click
SendMessage()
txtSend.Clear()
End Sub End Class
'HTTP/1.1 501 Not Implemented' was sent by the server, not generated by VB.
I would assume from this that your code works fine, and the problem lies with the command(s) you are sending after the client connects.

Sending an receiving two types of data across TCP connection

On the Client I want to -
I want to send a screenimage from the client and receive a string with cursor coordinates in.
On the server I want to receive and display the screenimage on Form2
and then send back my cursor coordinates to the client.
I can successfully send text messages from the client and receive them on the server using this code -
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
senddata("CHAT|" & TextBox3.Text) 'send the data with CHAT| as header
TextBox4.Text &= "You: " & " " & TextBox3.Text.Split("|")(0) & vbNewLine
End Sub
Sub senddata(ByVal message As String)
Dim sw As New StreamWriter(t.GetStream) 'declare a new streamwriter
sw.WriteLine(message) 'write the message
sw.Flush()
End Sub
and receive it on the server with this code -
Imports System.IO
Imports System.Net.Sockets
Public Class ConnectedClient
Private cli As TcpClient 'decleare a tcp client which will be the client that we assign to an instance of this class
Private uniqueid As String 'this will be used for the name property
Public Property name ''This will be the name of the ID containing its Unique ID
Get
Return uniqueid 'when we want to get it, it will return the Unique ID
End Get
Set(ByVal value)
uniqueid = value 'Used for setting the name
End Set
End Property
Sub New(ByVal client As TcpClient)
Dim r As New Random 'create a new random to serve as way to create our unique ID
Dim x As String = String.Empty 'declare a new variable to hold the ID
For i = 0 To 7 'we are goign to have an ID of 7 randomly generated characters
x &= Chr(r.Next(65, 89)) 'create a generate dnumber between 65 and 89 and get the letter that has the same ascii value (A-Z)
' and add it onto the ID string
Next
Me.name = client.Client.RemoteEndPoint.ToString().Remove(client.Client.RemoteEndPoint.ToString().LastIndexOf(":")) & " - " & x 'set the name to the Unique ID
cli = client 'assign the client specified to the TCP client variable to we can operate with it
cli.GetStream.BeginRead(New Byte() {0}, 0, 0, AddressOf read, Nothing) 'start reading using the read subroutine
End Sub
Public Event gotmessage(ByVal message As String, ByVal client As ConnectedClient) 'this is raised when we get a message from the client
Public Event disconnected(ByVal client As ConnectedClient) 'this is raised when we get the client disconnects
Sub read(ByVal ar As IAsyncResult) 'this will process all messages being recieved
Try
Dim sr As New StreamReader(cli.GetStream) 'initialize a new streamreader which will read from the client's stream
Dim msg As String = sr.ReadLine() 'create a new variable which will be used to hold the message being read
RaiseEvent gotmessage(msg, Me) 'tell the server a message has been recieved. Me is passed as an argument which represents
' the current client which it has recieved the message from to perform any client specific
' tasks if needed
cli.GetStream.BeginRead(New Byte() {0}, 0, 0, AddressOf read, Nothing) 'continue reading from the stream
Catch ex As Exception
Try 'if an error occurs in the reading purpose, we will try to read again to see if we still can read
Dim sr As New StreamReader(cli.GetStream) 'initialize a new streamreader which will read from the client's stream
Dim msg As String = sr.ReadLine() 'create a new variable which will be used to hold the message being read
RaiseEvent gotmessage(msg, Me) 'tell the server a message has been recieved. Me is passed as an argument which represents
' the current client which it has recieved the message from to perform any client specific
' tasks if needed
cli.GetStream.BeginRead(New Byte() {0}, 0, 0, AddressOf read, Nothing) 'continue reading from the stream
Catch ' IF WE STILL CANNOT READ
RaiseEvent disconnected(Me) 'WE CAN ASSUME THE CLIENT HAS DISCONNECTED
End Try
End Try
End Sub
Sub senddata(ByVal message As String) 'this is used to deal with sending out messages
Dim sw As New StreamWriter(cli.GetStream) 'declare a new streamwrite to write to the stream between the client and the server
sw.WriteLine(message) 'write the message to the stream
sw.Flush()
End Sub
Sub listen(ByVal port As Integer)
Try
Dim t As New TcpListener(IPAddress.Any, port) 'declare a new tcplistener
t.Start() 'start the listener
Do
Dim client As New ConnectedClient(t.AcceptTcpClient) 'initialize a new connected client
AddHandler client.gotmessage, AddressOf recieved 'add the handler which will raise an event when a message is recieved
AddHandler client.disconnected, AddressOf disconnected 'add the handler which will raise an event when the client disconnects
Loop Until False
Catch
End Try
End Sub
In a totally different application I can successfully send the screen image from the client using this code
Imports System.Net.Sockets
Imports System.Threading
Imports System.Drawing
Imports System.Runtime.Serialization.Formatters.Binary
Public Class Form1
Dim client As New TcpClient
Dim ns As NetworkStream
Dim port As Integer
Dim server As TcpListener
Dim listening As New Thread(AddressOf Listen)
Dim GetImage As New Thread(AddressOf ReceiveCursor)
Private Sub Button1_Click_1(sender As Object, e As EventArgs) Handles btnConnect.Click
port = CInt(txtPort.Text)
Try
If btnConnect.Text = "Connect" Then
client.Connect(txtIP.Text, port)
'MsgBox("Client connected !")
Timer1.Start()
btnConnect.Text = "Disconnect"
Else
btnConnect.Text = "Connect"
Timer1.Stop()
End If
Catch ex As Exception
MsgBox("Failed to connect..." + ex.Message)
End Try
End Sub
Public Function Desktop() As Image
Dim bounds As Rectangle = Nothing
Dim screenshot As System.Drawing.Bitmap = Nothing
Dim graph As Graphics = Nothing
bounds = Screen.PrimaryScreen.Bounds
screenshot = New Bitmap(bounds.Width, bounds.Height, System.Drawing.Imaging.PixelFormat.Format32bppPArgb)
graph = Graphics.FromImage(screenshot)
graph.CopyFromScreen(bounds.X, bounds.Y, 0, 0, bounds.Size, CopyPixelOperation.SourceCopy)
Return screenshot
End Function
Private Sub SendDesktop()
Dim bf As New BinaryFormatter
ns = client.GetStream
bf.Serialize(ns, Desktop())
End Sub
Private Sub BtnShare_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnShare.Click
If btnShare.Text.StartsWith("Share") Then
Timer1.Start()
'port = Integer.Parse(Me.txtPort.Text)
'server = New TcpListener(port)
'listening.Start()
btnShare.Text = "Stop Sharing"
Else
Timer1.Stop()
btnShare.Text = "Share Desktop"
End If
End Sub
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
SendDesktop()
' SetCursorPosition()
End Sub
Private Sub ReceiveCursor()
Dim bf As New BinaryFormatter
While client.Connected = True
ns = client.GetStream
txtCursorPosition.Text = bf.Deserialize(ns)
End While
End Sub
Private Sub Listen()
While client.Connected = False
server.Start()
client = server.AcceptTcpClient
End While
GetImage.Start()
End Sub
Public Sub StopListening()
GetImage.Abort()
server.Stop()
client = Nothing
If listening.IsAlive Then
listening.Abort()
End If
End Sub
End Class
and receive it on the server using this code -
Imports System.Net.Sockets
Imports System.Threading
Imports System.Drawing
Imports System.Runtime.Serialization.Formatters.Binary
Public Class Form2
Dim port As Integer
Dim client As New TcpClient
Dim ns As NetworkStream
Dim server As TcpListener
Dim listening As New Thread(AddressOf Listen)
Dim GetImage As New Thread(AddressOf ReceiveImage)
Private Sub Form2_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'Start the timer, obtain the port and start listening
Timer1.Start()
port = Integer.Parse(Form1.txtPort.Text)
server = New TcpListener(port)
listening.Start()
End Sub
Private Sub ReceiveImage()
Dim bf As New BinaryFormatter
While client.Connected = True
ns = client.GetStream
PictureBox1.Image = bf.Deserialize(ns)
End While
End Sub
Private Sub Listen()
While client.Connected = False
server.Start()
client = server.AcceptTcpClient
End While
GetImage.Start()
End Sub
Public Sub StopListening()
GetImage.Abort()
server.Stop()
client = Nothing
If listening.IsAlive Then
listening.Abort()
End If
End Sub
End Class
Is there a way of doing both using the same connection and somehow detecting which is text and which is the screenimage?

Using SqlDependency with named Queues in vb.net to populate the datagridview each time there is a change in database

Am developing an interface that needs to get data from the database and post to main system in real time.ie when a transcation is initiated in need to hit the main system in realtime for responce fo futher proccessing. i am creating an interface for the application which uses sql server.
i am trying to use the sqldependancy with the following code
Option Strict On
Option Explicit On
Imports System.Data.SqlClient
Imports System.Security.Permissions
mports System.ComponentModel
Public Class Home
Private Sub Home_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'BillPaymentsDataSet.Transactions_Temp' table. You can move, or remove it, as needed.
Me.Transactions_TempTableAdapter.Fill(Me.BillPaymentsDataSet.Transactions_Temp)
End Sub
Private Function GetConnectionString() As String
Return My.Settings.BillPaymentsConnectionString
End Function
Sub Initialization()
Dim con As New SqlConnection(My.Settings.BillPaymentsConnectionString)
SqlDependency.Start(My.Settings.BillPaymentsConnectionString)
End Sub
Private Function CanRequestNotifications() As Boolean
Dim permission As New SqlClientPermission( _
PermissionState.Unrestricted)
Try
permission.Demand()
Return True
Catch ex As Exception
Return False
End Try
End Function
Private Sub GetData()
BillPaymentsDataSet = Nothing
dt = New DataTable()
BillPaymentsDataSet.Clear()
SqlDependency.Stop(GetConnectionString())
SqlDependency.Start(GetConnectionString())
command.Notification = Nothing
If con Is Nothing Then
con = New SqlConnection(GetConnectionString())
End If
Dim dependency As New SqlDependency(command)
AddHandler dependency.OnChange, AddressOf dependency_OnChange
con.Open()
Using Transactions_TempTableAdapter As New SqlDataAdapter(command)
Me.Transactions_TempTableAdapter.Fill(Me.BillPaymentsDataSet.Transactions_Temp)
Me.DataGridView1.DataSource = BillPaymentsDataSet.Transactions_Temp
End Using
End Sub
Private Sub UserMantainanceToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles UserMantainanceToolStripMenuItem.Click
UserMantain.Show()
End Sub
Private Sub dependency_OnChange( _
ByVal sender As Object, ByVal e As SqlNotificationEventArgs)
Dim changeCount As Integer = 0
Const statusMessage As String = _
"{0} changes have occurred."
Dim i As ISynchronizeInvoke = CType(Me, ISynchronizeInvoke)
If i.InvokeRequired Then
' Create a delegate to perform the thread switch
Dim tempDelegate As New OnChangeEventHandler( _
AddressOf dependency_OnChange)
Dim args() As Object = {sender, e}
' Marshal the data from the worker thread
' to the UI thread.
i.BeginInvoke(tempDelegate, args)
Return
End If
' Remove the handler since it's only good
' for a single notification
Dim dependency As SqlDependency = _
CType(sender, SqlDependency)
RemoveHandler dependency.OnChange, _
AddressOf dependency_OnChange
' At this point, the code is executing on the
' UI thread, so it is safe to update the UI.
changeCount += 1
Me.Label1.Text = String.Format(statusMessage, changeCount)
' Add information from the event arguments to the list box
' for debugging purposes only.
With Me.ListBox1.Items
.Clear()
.Add("Info: " & e.Info.ToString())
.Add("Source: " & e.Source.ToString())
.Add("Type: " & e.Type.ToString())
End With
' Reload the dataset that's bound to the grid.
GetData()
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
End Sub
End Class

Chat system with one or two ways?

I'm trying con build a simple chat client/software (whole in on executable) wich start listen from the start on the port 5900 and when a client connect to that port the chat is established.
The problem is that only the client can chat to the server, the server cannot answer the client because the connection is working in one way.
The i've tried to connect from "server" to the client when it establishes a connection but the system crash warning me that the port is already on use.
This my code: (working in one way)
Imports System.Net.Sockets
Imports System.Text
Imports System.Reflection
Public Class frmComplete
Dim Data As Integer
Dim Message As String
Private sServer As TcpListener
Private sClient As New TcpClient
Private cServer As TcpListener
Private cClient As New TcpClient
Private cNick As String
Dim BufferSize(1024) As Byte
Private Delegate Sub MessageDelegate(ByVal Message As String)
Private Sub frmComplete_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
srvListen(5900)
btnSend.Enabled = False
End Sub
Private Sub OnServerConnect(ByVal AR As IAsyncResult)
sClient = sServer.EndAcceptTcpClient(AR)
sClient.GetStream.BeginRead(BufferSize, 0, BufferSize.Length, AddressOf OnRead, Nothing)
My.Computer.Audio.Play(Application.StartupPath & "\Connected.wav", AudioPlayMode.Background)
End Sub
Private Sub OnRead(ByVal AR As IAsyncResult)
Data = sClient.GetStream.EndRead(AR)
Message = Encoding.ASCII.GetString(BufferSize, 0, Data)
Dim Args As Object() = {Message}
Me.Invoke(New MessageDelegate(AddressOf PrintMessage), Args)
sClient.GetStream.BeginRead(BufferSize, 0, BufferSize.Length, AddressOf OnRead, Nothing)
End Sub
Private Sub PrintMessage(ByVal Message As String)
Try
txtChat.Text = txtChat.Text & Message & vbCrLf
My.Computer.Audio.Play(Application.StartupPath & "\Message.wav", AudioPlayMode.Background)
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical)
End Try
End Sub
Private Sub srvListen(ByVal port As Integer)
Try
sServer = New TcpListener(System.Net.IPAddress.Any, 5900)
sServer.Start()
'THIS WILL RAISE THE EVENT WHEN A CLIENT IS CONNECTED
sServer.BeginAcceptTcpClient(AddressOf OnServerConnect, Nothing)
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical)
End Try
End Sub
Private Sub txtMessage_KeyDown(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles txtMessage.KeyDown
'FIXME (SOUND T_T)
If e.KeyCode = Keys.Enter Then
SendMessage(cNick & ":" & txtMessage.Text)
End If
End Sub
Private Sub btnConnect_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnConnect.Click
ConnectToServer(txtIP.Text)
cNick = txtNickname.Text
txtNickname.Enabled = False
txtIP.Enabled = False
btnConnect.Enabled = False
End Sub
Private Sub ConnectToServer(ByVal ipadress As String)
Try
cClient.BeginConnect(ipadress, 5900, AddressOf OnClientConnect, Nothing)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
Private Sub OnClientConnect(ByVal AR As IAsyncResult)
Try
cClient.EndConnect(AR)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
Private Sub btnSend_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSend.Click
If Not String.IsNullOrEmpty(txtMessage.Text) Then
txtChat.Text = txtChat.Text & "Me:" & txtMessage.Text & vbCrLf
SendMessage(cNick & ":" & txtMessage.Text)
End If
End Sub
Private Sub SendMessage(ByVal message As String)
If cClient.Connected = True Then
Dim Writer As New IO.StreamWriter(cClient.GetStream)
Writer.Write(message)
Writer.Flush()
End If
txtMessage.Text = ""
End Sub
Private Sub SendCommand(ByVal command As String)
If cClient.Connected = True Then
Dim Writer As New IO.StreamWriter(cClient.GetStream)
Writer.Write(command)
Writer.Flush()
End If
txtMessage.Text = ""
End Sub
Private Sub txtMessage_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtMessage.TextChanged
If Not String.IsNullOrEmpty(txtMessage.Text) Then
btnSend.Enabled = True
Else
btnSend.Enabled = False
End If
End Sub
End Class
What I should do? use two ports? one for write and another to read? And if i need to conect multiple clients to one user? (remember the same exe is server/client)
Please help me =(
You aren't reading any data coming back from the Server. You'll notice in your OnServerConnect method you call the BeginRead -- you will also need to do this for your client in the OnClientConnect method, or you'll get a one way communication. Perhaps this is why you are not seeing any data coming through?
I'm guessing, when your Server sends back the data to the client, you aren't getting a hard-error, just no data.
Just glancing over your code I noticed that you have both a TcpClient and TcpListener for your client and server. You don't need this. Your SERVER will be the TcpListener, and your CLIENT will be the TcpClient. By asking if you should connect back on a different port from the server, you are shortchanging yourself of what the TCP connection really is. Once your TcpClient has connected to the TcpServer, your connection is established. There is no need further to attempt to connect.
You're client code should be something similar to:
Private Sub OnClientConnect(ByVal AR As IAsyncResult)
Try
cClient.EndConnect(AR)
sServer.GetStream.BeginRead(BufferSize, 0, BufferSize.Length, AddressOf OnClientRead, Nothing)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
Private Sub OnClientRead(ByVal AR As IAsyncResult)
Data = sServer.GetStream.EndRead(AR)
Message = Encoding.ASCII.GetString(BufferSize, 0, Data)
Dim Args As Object() = {Message}
Me.Invoke(New MessageDelegate(AddressOf PrintMessage), Args)
sServer.GetStream.BeginRead(BufferSize, 0, BufferSize.Length, AddressOf OnClientRead, Nothing)
End Sub