I am structuring a postgres database.
I have two tables, products (coke) and optional (with ice, lemon ...), that is, a relationship many to many.
An associative table is usually built using the primary keys of the tables, correct? However, in my case, there is a specific feature ... due to some imports from other databases...I have two ids fields (id and "externalId"), one primary key and one common ... one is the local id of my bank and the other represents the id that the item has in the bank from which it was imported.
I need an associative table between "externalId" and a primary key from another table.
ExternalId is not a primary key...
ALTER TABLE public.opcional_produto
Add
CONSTRAINT idproduto_fkey FOREIGN KEY (prod_id) REFERENCES public.produto (prod_idExt)
ERROR: there is no unique constraint matching given keys for
referenced table "produto" SQL state: 42830
How can I do?
If externalid is unique, you should create a unique constraint:
ALTER TABLE produto ADD UNIQUE (externalid);
Ideally it should also be not nullable:
ALTER TABLE produto ALTER externalid SET NOT NULL;
Now it can be used as target of a foreign key.
I have a table DRIVER with a column having following specification
BranchPostedAt int not null
In another table viz. CompanyBranch, I have following column
BranchId int not null
In the second table viz. CompanyBranch, primary key is set on two columns as under
CompanyId int not null
BranchId int not null
Is there any way by which I can set a foreign reference key on dbo.Driver.BranchPostedId referencing dbo.CompanyBranch.BranchId at the time of creating dbo.Driver?
Any help?
An alternative would be to create a trigger, but this is a little messy. I prefer previous posters answer to create a new identiy primary key on CompanyBranch [CompanyBranchId] and reference that as a foreign key.
Something like:
CREATE TRIGGER trDriver
ON DRIVER
AFTER INSERT, UPDATE
AS
BEGIN
SET NOCOUNT ON;
IF NOT EXISTS(Select *
from CompanyBranch cb
Inner join inserted i on i.BranchPostedAt = cb.BranchId )
BEGIN
RAISERROR ('The BranchPostedAt is not in the CompanyBranch table.', 16, 1);
ROLLBACK TRANSACTION;
RETURN
END
END
GO
No, it is not possible. To create a foreign key, the key that you "reference" to in the other table must be a UNIQUE or PRIMARY KEY constraint.
You can consider few options:
Make BranchId in CompanyBranch table as Unique
Create a new PRIMARY KEY in CompanyBranch - CompanyBranchId, and
reference it in your Driver table
Based on your Question and Comments, This is what you have
TABLE dbo.CityMaster
CityId INT NOT NULL PRIMARY KEY,
TABLE dbo.CompanyBranch
CompanyID INT NOT NULL,
BranchID INT NOT NULL REFERENCES dbo.CityMaster(CityId),
CONSTRAINT PK... PRIMARY KEY (CompanyID,BranchID)
TABLE dbo.DRIVER
BranchPostedAt INT NOT NULL,
Now, Since BranchID references CityMaster.City column and BranchID is not a unique column in dbo.CompanyBranch, You cannot use BranchID as a Foreign key reference for your DRIVER.BranchPostedAt.
Option 1
You should use dbo.CityMaster which contain the master list of values which will be stored in DRIVER.BranchPostedAt.
Option 2
If you want to dbo.CompanyBranch, you would then have to create a new unique column(you can even use an identity column to make it transparent) may be CompanyBranchID (apart from your existing composite key) and use it as a foreign key reference. Your existing composite key cannot be used as is.
having CompanyBranch Table only is meaningfull when you have more than one Company and also there is possibility that companies share branches with each other, otherwise you don't need such table. you just then have Company and Branch Tables and in Branch Table, BranchID is unique and you have a foreign key CompanyID in Branch Table Too.
Why does add a foreign key to the tblDomare table result in this error?
The ALTER TABLE statement conflicted with the FOREIGN KEY constraint "FK__tblDomare__PersN__5F7E2DAC". The conflict occurred in database "almu0004", table "dbo.tblBana", column 'BanNR'.
Code
CREATE TABLE tblDomare
(PersNR VARCHAR (15) NOT NULL,
fNamn VARCHAR (15) NOT NULL,
eNamn VARCHAR (20) NOT NULL,
Erfarenhet VARCHAR (5),
PRIMARY KEY (PersNR));
INSERT INTO tblDomare (PersNR,fNamn,eNamn,Erfarenhet)
Values (6811034679,'Bengt','Carlberg',10);
INSERT INTO tblDomare (PersNR,fNamn,eNamn,Erfarenhet)
Values (7606091347,'Josefin','Backman',4);
INSERT INTO tblDomare (PersNR,fNamn,eNamn,Erfarenhet)
Values (8508284163,'Johanna','Backman',1);
CREATE TABLE tblBana
(BanNR VARCHAR (15) NOT NULL,
PRIMARY KEY (BanNR));
INSERT INTO tblBana (BanNR)
Values (1);
INSERT INTO tblBana (BanNR)
Values (2);
INSERT INTO tblBana (BanNR)
Values (3);
ALTER TABLE tblDomare
ADD FOREIGN KEY (PersNR)
REFERENCES tblBana(BanNR);
It occurred because you tried to create a foreign key from tblDomare.PersNR to tblBana.BanNR but/and the values in tblDomare.PersNR didn't match with any of the values in tblBana.BanNR. You cannot create a relation which violates referential integrity.
This query was very useful for me. It shows all values that don't have any matches
select FK_column from FK_table
WHERE FK_column NOT IN
(SELECT PK_column from PK_table)
Try this solution:
There is a data item in your table whose associated value doesn't exist in the table you want to use it as a primary key table.
Make your table empty or add the associated value to the second table.
It is possible to create the foreign key using ALTER TABLE tablename WITH NOCHECK ..., which will allow data that violates the foreign key.
"ALTER TABLE tablename WITH NOCHECK ..." option to add the FK -- This solution worked for me.
Remove all existing data from your tables and then make a relation between the tables.
Before You add Foreign key to the table, do the following
Make sure the table must empty or The column data should match.
Make sure it is not null.
If the table contains do not go to design and change, do it manually.
alter table Table 1 add foreign key (Column Name) references Table 2 (Column Name)
alter table Table 1 alter column Column Name attribute not null
I guess, a column value in a foreign key table should match with the column value of the primary key table. If we are trying to create a foreign key constraint between two tables where the value inside one column(going to be the foreign key) is different from the column value of the primary key table then it will throw the message.
So it is always recommended to insert only those values in the Foreign key column which are present in the Primary key table column.
For ex. If the Primary table column has values 1, 2, 3 and in Foreign key column the values inserted are different, then the query would not be executed as it expects the values to be between 1 & 3.
In very simple words your table already has data present in it and the table you are trying to create relationship with does have that Primary key set for the values that are already present.
Either delete all the values of the existing table.
Add all the values of foreign key reference in the new table.
Try DELETE the current datas from tblDomare.PersNR . Because the values in tblDomare.PersNR didn't match with any of the values in tblBana.BanNR.
When you define a Foreign Key in table B referencing the Primary Key of table A it means that when a value is in B, it must be in A. This is to prevent unconsistent modifications to the tables.
In your example, your tables contain:
tblDomare with PRIMARY KEY (PersNR):
PersNR |fNamn |eNamn |Erfarenhet
-----------|----------|-----------|----------
6811034679 |'Bengt' |'Carlberg' |10
7606091347 |'Josefin' |'Backman' |4
8508284163 |'Johanna' |'Backman' |1
---------------------------------------------
tblBana:
BanNR
-----
1
2
3
-----
This statement:
ALTER TABLE tblDomare
ADD FOREIGN KEY (PersNR)
REFERENCES tblBana(BanNR);
says that any line in tblDomare with key PersNR must have a correspondence in table tblBana on key BanNR. Your error is because you have lines inserted in tblDomare with no correspondence in tblBana.
2 solutions to fix your issue:
either add lines in tblBana with BanNR in (6811034679, 7606091347, 8508284163)
or remove all lines in tblDomare that have no correspondence in tblBana (but your table would be empty)
General advice: you should have the Foreign Key constraint before populating the tables. Foreign keys are here to prevent the user of the table from filling the tables with inconsistencies.
i had this error too
as Smutje reffered make sure that you have not a value in foreign key column of your base foreign key table that is not in your reference table i.e(every value in your base foreign key table(value of a column that is foreign key) must also be in your reference table column)
its good to empty your base foreign key table first then set foreign keys
the data you have entered a table(tbldomare) aren't match a data you have assigned primary key table. write between tbldomare and add this word (with nocheck) then execute your code.
for example you entered a table tbldomar this data
INSERT INTO tblDomare (PersNR,fNamn,eNamn,Erfarenhet)
Values (6811034679,'Bengt','Carlberg',10);
and you assigned a foreign key table to accept only 1,2,3.
you have two solutions one is delete the data you have entered a table then execute the code. another is write this word (with nocheck) put it between your table name and add
like this
ALTER TABLE tblDomare with nocheck
ADD FOREIGN KEY (PersNR)
REFERENCES tblBana(BanNR);
Smutje is correct and Chad HedgeCock offered a great layman's example.
Id like to build on Chad's example by offering a way to find/delete those records.
We will use Customer as the Parent and Order as the child. CustomerId is the common field.
select * from Order Child
left join Customer Parent on Child.CustomerId = Parent.CustomerId
where Parent.CustomerId is null
if you are reading this thread... you will get results. These are orphaned children. select * from Order Child
left join Customer Parent on Child.CustomerId = Parent.CustomerId
where Parent.CustomerId is null Note the row count in the bottom right.
Go verify w/ whomever you need to that you are going to delete these rows!
begin tran
delete Order
from Order Child
left join Customer Parent on Child.CustomerId = Parent.CustomerId
where Parent.CustomerId is null
Run the first bit.
Check that row count = what you expected
commit the tran
commit tran
Be careful. Someone's sloppy programming got you into this mess. Make sure you understand the why before you delete the orphans. Maybe the parent needs to be restored.
From our end, this is the scenario:
We have an existing table in the database with records.
Then I introduces a NOT nullable foreign key
After executing the update i got this error.
How did i solve you ask?
SOLUTION: I just removed all the records of the table, then tried to update the database and it was successful.
This happens to me, since I am designing my database, I notice that I change my seed on my main table, now the relational table has no foreign key on the main table.
So I need to truncate both tables, and it now works!
You should see if your tables has any data on the rows. If "yes" then you should truncate the table(s) or else you can make them to have the same number of data at tblDomare.PersNR to tblBana.BanNR and vise-verse.
In my scenario, using EF, upon trying to create this new Foreign Key on existing data, I was wrongly trying to populate the data (make the links) AFTER creating the foreign key.
The fix is to populate your data before creating the foreign key since it checks all of them to see if the links are indeed valid. So it couldn't possibly work if you haven't populated it yet.
I encounter some issue in my project.
In child table, there isn't any record Id equals 1 and 11
I inserted DEAL_ITEM_THIRD_PARTY_PO table which Id equals 1 and 11 then I can create FK
Please first delete data from that table and then run the migration again. You will get success
I had the same problem.
My issue was having nullable: true in column (migration file):
AddColumn("dbo.table", "column", c => c.Int(nullable: true));
Possible Solutions:
Change nullable 'false' to 'true'. (Not Recommended)
Change property type from int to int? (Recommended)
And if required, change this later after adding column > then missing field data in previous records
If you've changed an existing property from nullable to non-nullable:
3) Fill the column data in database records
A foreign key constraint in a child table must have a parent table with a primary key. The primary key must be unique. The foreign key value must match a value in the patent table primary key
When you alter table column from nullable to not nullable column where this column is foreign key, you must :
Firstly, initialize this column with value (because it is foreign
key not nullable).
After that you can alter your table column normally.
Please try below query:
CREATE TABLE tblBana
(BanNR VARCHAR (15) NOT NULL PRIMARY KEY,
);
CREATE TABLE tblDomare
(PersNR VARCHAR (15) NOT NULL PRIMARY KEY,
fNamn VARCHAR (15) NOT NULL,
eNamn VARCHAR (20) NOT NULL,
Erfarenhet VARCHAR (5),
FK_tblBana_Id VARCHAR (15) references tblBana (BanNR)
);
INSERT INTO tblBana (BanNR)
Values (3);
INSERT INTO tblDomare (PersNR,fNamn,eNamn,Erfarenhet,FK_tblBana_Id)
Values (8508284173,'Johanna','Backman',1,3);
or you can use this
SELECT fk_id FROM dbo.tableA
Except
SELECT fk_id From dbo.tableB
and just FYI, in case you do all of your data reference checks and find no bad data...apparently it is not possible to create a foreign key constraint between two tables and fields where those fields are the primary key in both tables! Do not ask me how I know this.
I am trying to add primary key to newly added column in existing table name Product_Details.
New Column added: Product_Detail_ID (int and not null)
I am trying add primary key to Product_Detail_ID (please note: there are no other primary or foreign key assigned to this table)
I am trying with this query but getting error.
ALTER TABLE Product_Details
ADD CONSTRAINT pk_Product_Detils_Product_Detail_ID PRIMARY KEY(Product_Detail_ID)
GO
Error:
The CREATE UNIQUE INDEX statement terminated because a duplicate key was found for the object name 'dbo.Product\_Details' and the index name 'pk\_Product\_Detils'. The duplicate key value is (0).
Am I missing something here? I am using SQL Server 2008 R2. I would appreciate any help.
If you want SQL Server to automatically provide values for the new column, make it an identity.
ALTER TABLE Product_Details DROP COLUMN Product_Detail_ID
GO
ALTER TABLE Product_Details ADD Product_Detail_ID int identity(1,1) not null
GO
ALTER TABLE Product_Details
add CONSTRAINT pk_Product_Detils_Product_Detail_ID primary key(Product_Detail_ID)
GO
In mysql, I was able to achieve with following query
ALTER TABLE table_name ADD new_column int NOT NULL AUTO_INCREMENT primary key
Add Primary Key to First Position
ALTER TABLE table_name
ADD column_name INT PRIMARY KEY AUTO_INCREMENT FIRST;
Reference: Stack Overflow | Tech On The Net
You are getting the error because you have existing data that does not fullfill the constraint.
There are 2 ways to fix it:
clean up the existing data before adding the constraint
add the constraint with the "WITH NOCHECK" option, this will stop sql server checking existing data, only new data will be checked
ALTER TABLE Jaya
ADD CONSTRAINT no primary key(No);
here Jaya is table name,
no is column name,
ADD CONSTRAINT is we giving the primary key keyword
If you want to add a new column say deptId to the existing table say department then you can do it using the below code.
ALTER TABLE department ADD COLUMN deptID INT;
it will create your new column named deptID.
now if you want to add constraint also along with new column while creating it then you can do it using the below code. In the below code I am adding primary key as a constraint. you can add another constraint also instead of primary key like foreign key, default etc.
ALTER TABLE department ADD COLUMN deptID INT NOT NULL ADD CONSTRAINT PRIMARY KEY(deptID);
k. friend
command:
sql> alter table tablename add primary key(col_name);
ex: alter table pk_Product_Detils add primary key(Product_Detail_ID);