I have a table that contains the following fields: issues to go (itg), customer number (ctm_nbr) and pub code (pub_cde). The data looks like this
12 010000024412 CTR
6 010000024412 RTF
18 010000002325 CTR
9 010000002325 RTF
3 010000014789 CTR
1 010000014789 RTF
I need to be able to delete all of the records where the RTF pub code and matching customer number is half of the issues to go (itg) in the CTR pub code for that matching customer. That way once I have all the records removed I would only have records like this remaining:
3 010000014789 CTR
1 010000014789 RTF
You might use something like: Delete all records for customer number x where the customer number has issues to go in CTR field that are twice the issues to go in the RTF field.
Delete
from --table--
where ctm_nbr in (select t2.ctm_nbr
from --table-- t2 join --table-- t3
ON (t2.ctm_nbr = t3.ctm_nbr)
where t2.pub_cde="CTR"
and t3.pub_cde="RTF"
and t2.itg = 2*t3.itg
)
The tricky bit is getting both related records at one time:
delete
a1
from
a a1
where (
a1.pub_cde = 'RTF' and
exists (
select 'x'
from a a2
where a2.ctm_nbr = a1.ctm_nbr and
a2.pub_cde = 'CTR' and
a2.itg = 2 * a1.itg
)
) or (
a1.pub_cde = 'CTR' and
exists (
select 'x'
from a a2
where a2.ctm_nbr = a1.ctm_nbr and
a2.pub_cde = 'RTF' and
a2.itg * 2 = a1.itg
)
);
Example SQL Fiddle
You can use conditional aggregation:
delete from tbl
where ctm_nbr in(
select ctm_nbr
from tbl
group by ctm_nbr
having max(case when pub_cde = 'CTR' then cast(itg as decimal) end) /
max(case when pub_cde = 'RTF' then cast(itg as decimal) end) = 2)
Fiddle: http://sqlfiddle.com/#!6/a7efe/1/0
The reason I casted itg as decimal is to avoid the rounding issue that would otherwise occur due to your column being an interger data type (thanks to Laurence for pointing that out).
DELETE t1
FROM a t1
INNER JOIN a t2
ON t1.ctm_nbr = t2.ctm_nbr
WHERE
((t1.pub_cde = 'CTR') AND
(t2.pub_cde = 'RTF') AND
(2*t2.itg = t1.itg))
OR
((t2.pub_cde = 'CTR') AND
(t1.pub_cde = 'RTF') AND
(2*t1.itg = t2.itg))
Related
I have a query that I am pulling transactions from. I want to be able to pull transactions where my commodity field = A1 and the newvalue field <> A1 for any of the transactions for each individual case number. In other words, I have 2 case numbers with 5 transactions each, one case number has a transaction record of commodity = A1 and newvalue = A1. The other case has a record where commodity = A1 and newvalue= B2, this is the case I would like returned in the query. Keep in mind that the previous case may have that same transaction but it should not be returned because there is a record of newvalue = A1. I have attached an image and the records highlighted in yellow are what I expect my output to be. Below is my current "Where" statement that I need help re-writing. I was also told that I may need a "Group BY" statement which I tried and still pulled the same results.
SELECT
Allcases.caseno as caseno, Allcases.division_desc as division_desc, Allcases.close_date as close_date, Allcases.week_of as week_of,
Allcases.case_type as case_type,
a.transactdate as transactdate, a.transacttypeid as transacttypeid, a.userid as userid,
concat(RTRIM(Usr.fullname), ' <', RTRIM(Usr.EmailAddress), '>') as CR1_CR2_FULLNAME,
Allcases.commodity as commodity,
b.oldvalue as oldvalue, b.newvalue as newvalue, changereason as changereason
FROM
(
select b.*, sum(case when b.newvalue = 'A1' then 1 else 0 end) over(partition by Allcases.caseno) cnt_new_value_A1
from
dataiku.qca_casedatachange_parquet b
INNER JOIN dataiku.qcatransact_parquet a
ON b.transactid = a.transactid
INNER JOIN dataiku.qca_validated_cases_consolidated_parquet Allcases
ON a.casedataid = Allcases.casedataid
INNER JOIN dataiku.set_qca_reclassification_head_parquet h
ON Allcases.caseno = h.caseno
INNER JOIN dataiku.qca_user_parquet Usr
ON a.UserID = Usr.UserID
where
b.FieldID = 6
AND a.transacttypeid IN (1, 2, 3)
AND Allcases.commodity = 'A1'
)s
where cnt_new_value_A1 = 0
ORDER BY Allcases.caseno, A.transactid
If you do not want to return cases for which does not exists record with b.newvalue = 'A1' then calculate analytic sum() and use it in the where
select ...
from
(
select t.*,
sum(case when newvalue ='A1' then 1 else 0 end) over(partition by case_number) cnt_new_value_A1
from ...
where
FieldID = 6 --COMMODITY
AND transacttypeid IN (1, 2, 3)
AND commodity = 'A1'
)s
where cnt_new_value_A1 = 0 --No A1 in newvalue per case_number
I have the following query:
SELECT
F.IID,
F.E_NUM AS M_E_NUM,
MCI.E_NUM AS MCI_E_NUM,
F.C_NUM AS M_C_NUM,
MCI.C_NUM AS MCI_C_NUM,
F.ET_ID AS M_ET_ID,
EDIE.ET_ID AS ED_INDV_ET_ID,
COUNT(*) OVER (PARTITION BY F.IID) IID_COUNT
FROM FT_T F JOIN CEMEI_T MCI ON F.IID = MCI.IID
JOIN EDE_T EDE ON MCI.E_NUM = EDE.E_NUM
JOIN EDIE_T EDIE ON EDIE.IID = F.IID AND EDIE.ET_ID = EDE.ET_ID
WHERE
F.DEL_F = 'N'
AND MCI.EFF_END_DT IS NULL
AND MCI.TOS = 'BVVB'
AND EDE.PTEND_DT IS NULL
AND EDE.DEL_S = 'N'
AND EDE.CUR_IND = 'A'
AND EDIE.TAR_N = 'Y'
AND F.IID IN
(
SELECT DISTINCT IID
FROM FT_T
WHERE GROUP_ID = 'BG'
AND DEL_F = 'N'
AND (IID, E_NUM) NOT IN
(
SELECT IID, E_NUM FROM CEMEI_T
WHERE TOS = 'BVVB' AND EFF_END_DT IS NULL
)
);
I am basically grabbing information from several tables and creating a flat record of them.
Everything works accordingly except now I need to find out whether there are two records in FT_T table with identical IID's and display that count as part of the result set.
I tried to use partitioning but all the rows in the result set return a single count even though there are ones that have 2 records with identical IID's in FT_T.
The reason I initially said that I'm gathering information from several tables is due to the fact that FT_T might not have all the information I need if two records are not available for the same IID, so I have to retrieve them from other tables JOINed in the query. However, I need to know which FT_T.IID's have two records in FT_T (or greater than one).
Perhaps you need to calculate the count before the join and filtering:
SELECT . . .
FROM (SELECT F.*,
COUNT(*) OVER (PARTITION BY F.IID) as IID_CNT
FROM FT_T F
) JOIN
CEMEI_T MCI
ON F.IID = MCI.IID JOIN
EDE_T EDE
ON MCI.E_NUM = EDE.E_NUM JOIN
EDIE_T EDIE
ON EDIE.IID = F.IID AND EDIE.ET_ID = EDE.ET_ID
. . .
this is merely a comment/observation, but formatting is needed
You use of in(...) with select distinct and not in(...,...) seems complex and could be a problem if some values are NULL. I suggest you consider using EXISTS and NOT EXISTS instead. e.g.
AND EXISTS (
SELECT
NULL
FROM FT_T
WHERE F.IID = FT_T.IID
AND FT_T.GROUP_ID = 'BG'
AND FT_T.DEL_F = 'N'
AND NOT EXISTS (
SELECT
NULL
FROM CEMEI_T
WHERE FT_T.IID = CEMEI_T.IID
AND FT_T.E_NUM = CEMEI_T.E_NUM
AND CEMEI_T.TOS = 'BVVB'
AND CEMEI_T.EFF_END_DT IS NULL
)
)
I have a query with subqueries in the where statement which works fine but I need to improve on it but I am not sure of the best way to go about this.
Basically I am getting last years results for students in this years classes. The code below works fine for classcode '10DRADRA1' but there are many more classes and I want the query to iterate through all classes for 2017 Semester 1. I need to have the classcode included as one of the output fields also. So the query will start with the first class and give all the results for that class, then do the same for the next class in the subquery. I am not sure how to include the classcode in the select statement next to all the results from the previous year.
Note that students may do a number of classes this year so there may be some repetition of the results from the previous year. Every class they do this year should include the students name and their results from the previous year. I hardcoded '10DRADRA1' in just to get things working, if I remove it it provides all students in the school only once, while I want each class they are in once and the same results for every class they are in.
Also not that vStudentReportsSemesterResults is a view that holds all results, StudentClasses is a table which holds the class codes a student is doing and SubjectClasses is a table holding the codes for all classes in the school
Is anyone able to advise on the best way of doing this? Here is my current code.
SELECT vStudentReportsSemesterResults.StudentID,
vStudentReportsSemesterResults.AssessResultsResult,
vStudentReportsSemesterResults.AssessAreaHdgAbbrev2,
vStudentReportsSemesterResults.FileSemester,
vStudentReportsSemesterResults.FileYear,
vStudentReportsSemesterResults.ClassLearningAreaCode,
vStudentReportsSemesterResults.AssessmentCode,
vStudentReportsSemesterResults.StudentNameInternal
FROM vStudentReportsSemesterResults
WHERE vStudentReportsSemesterResults.StudentID in
(
select StudentClasses.ID from StudentClasses
where StudentClasses.filesemester = 1 and
StudentClasses.fileyear = 2017 and
StudentClasses.classcode in
(
select SubjectClasses.ClassCode from SubjectClasses
where SubjectClasses.FileYear = 2017 and
SubjectClasses.FileSemester = 1 and
SubjectClasses.FileType = 'A' and
SubjectClasses.ClassCampus = 'S' and
SubjectClasses.ClassCode like '10DRADRA1'
)
)
and (vStudentReportsSemesterResults.ClassLearningAreaCode = 'ENG' OR
vStudentReportsSemesterResults.ClassLearningAreaCode = 'MAT' OR
vStudentReportsSemesterResults.ClassLearningAreaCode = 'SCI') AND
(vStudentReportsSemesterResults.AssessAreaHdgAbbrev2 = 'Grade' OR
vStudentReportsSemesterResults.AssessAreaHdgAbbrev2 = 'Level') AND
(vStudentReportsSemesterResults.AssessResultsResult <> '') AND
(vStudentReportsSemesterResults.FileYear = 2016) AND
(vStudentReportsSemesterResults.FileSemester = 4)
Join StudentClasses to vStudentReportsSemesterResults:
SELECT
sc.ClassCode,
srsr.StudentID,
srsr.AssessResultsResult,
srsr.AssessAreaHdgAbbrev2,
srsr.FileSemester,
srsr.FileYear,
srsr.ClassLearningAreaCode,
srsr.AssessmentCode,
srsr.StudentNameInternal
FROM vStudentReportsSemesterResults srsr
JOIN StudentClasses sc
ON sc.ID = srsr.StudentID
AND sc.FileSemester = 1
AND sc.FileYear = srsr.FileYear + 1
AND EXISTS
(
select *
from SubjectClasses subc
where subc.FileYear = sc.FileYear
and subc.ClassCode = sc.ClassCode
and subc.FileSemester = sc.FileSemester
and subc.FileType = 'A'
and subc.ClassCampus = 'S'
)
WHERE srsr.ClassLearningAreaCode in ('ENG', 'MAT', 'SCI')
AND srsr.AssessAreaHdgAbbrev2 in ('Grade', 'Level')
AND srsr.AssessResultsResult <> ''
AND srsr.FileYear = 2016
AND srsr.FileSemester = 4;
This is more readable:
SELECT
ClassCode,
StudentID,
AssessResultsResult,
AssessAreaHdgAbbrev2,
ClassLearningAreaCode,
AssessmentCode,
StudentNameInternal,
lr.FileYear,
lr.FileSemester,
tr.FileYear,
tr.FileSemester,
tr.FileType,
tr.ClassCampus
FROM
vStudentReportsSemesterResults lr
inner join (
select ID, sc.ClassCode, sc.FileYear, sc.filesemester, sbjc.FileType, sbjc.ClassCampus
from StudentClasses sc
INNER JOIN SubjectClasses sbjc ON SC.classcode = sbjc.ClassCode and sc.FileSemester=sbjc.FileSemester and sc.FileYear=sbjc.FileYear
) tr on lr.StudentID = tr.ID
and lr.FileYear = tr.FileYear - 1
WHERE
ClassLearningAreaCode IN ('ENG', 'MAT', 'SCI')
AND AssessAreaHdgAbbrev2 IN ('Grade', 'Level')
AND (AssessResultsResult <> '')
AND lr.FileYear = 2016
AND lr.FileSemester = 4
and tr.FileSemester = 1
and tr.FileType = 'A'
and tr.ClassCampus = 'S'
ORDER BY 2,1,5
In SELECT section I have added some fields to better understand result.
In WHERE clause you can control how to filter comparision.
Put some indexes on join and filter columns and the query will run fast
This Code does not work:
SELECT
(
SELECT [T_Licence].[isInstalled]
FROM [T_Licence]
WHERE [T_Licence].[System] = [T_System].[ID]
AND [T_Licence].[Software] = 750
) AS [IsInstalled] ,*
FROM [T_System]
WHERE [IsInstalled] = 1
I have to do it this way, but this makes the whole code so complicated. I really dont want that:
SELECT
(
SELECT [T_Licence].[isInstalled]
FROM [wf_subj_all].[T_Licence]
WHERE [T_Licence].[System] = [T_System].[ID]
AND [T_Licence].[Software] = 750
) AS [IsInstalled] ,*
FROM [wf_subj_it].[T_System]
WHERE
(
SELECT
(
SELECT [T_Licence].[isInstalled]
FROM [wf_subj_all].[T_Licence]
WHERE [T_Licence].[System] = [T_System].[ID]
AND [T_Licence].[Software] = 750
)
) = 1
Is there any way to do it like shown in the first code snippet?
So that the code stays somehow readeble.
thx very much
Try this one -
SELECT *
FROM wf_subj_it.T_System s
CROSS APPLY (
SELECT /*TOP(1)*/ t.isInstalled
FROM wf_subj_all.T_Licence t
WHERE t.[System] = s.ID
AND t.Software = 750
) t
WHERE t.isInstalled = 1
Just wrap the query with an outer select and it should work.
SELECT *
FROM
(
SELECT
(
SELECT [T_Licence].[isInstalled]
FROM [T_Licence]
WHERE [T_Licence].[System] = [T_System].[ID]
AND [T_Licence].[Software] = 750
) AS [IsInstalled], *
FROM [T_System]
) As tbl1
WHERE [IsInstalled] = 1
The assumptions I made for my answer:
You're trying to select the systems (table T_System) which have software with id=750 installed
The table T_License contains the installed information
There is a 1:n relation between T_System and T_License: T_License may contain 0, 1 or more records per Sytem value...
but the combination System plus Software is unique
I think this will work
SELECT l.[isInstalled], s.*
FROM [wf_subj_it].[T_System] AS s
INNER JOIN [wf_subj_it].[T_License] AS l
ON l.[System] = s.[ID]
AND l.[Software] = 750
AND l.isInstalled = 1
Hi
I am using an SP which takes 7 minutes in a server which has 7336 recrds
and 6seconds in another server which has 3500 records.
Can anybody help me to know why is it happening?
Thanks,
-Divya
THE SP:
SELECT WORKSHEET_ID
FROM PERSON PER
INNER JOIN PERSON EMPLEE
ON EMPLEE.PERSON_ID = PER.PERSON_ID
AND
dbo.FN_CHECKRPTSECURITY(EMPLEE.PERSON_ID, #p_SEC_ACCOUNT_ID) > 0
LEFT JOIN SEARCH_ASSIGNMENT_VW PERSON_ASGN
ON PERSON_ASGN.ASSIGNMENT_ID =
dbo.FN_GETRPTASSIGNMENTID(EMPLEE.PERSON_ID)
LEFT JOIN LOOKUP EMPLEE_ASGN_STAT
ON EMPLEE_ASGN_STAT.TYPE_ = 'ASSIGNMMENT_STATUS_CODE'
AND EMPLEE_ASGN_STAT.CODE = PERSON_ASGN.ASGN_STAT_CODE
INNER JOIN
(SELECT w1.ASSIGNMENT_ID, w1.WORKSHEET_ID, w1.EFFECTIVE_DATE, w1.APPROVED_BY, w3.CREATED_BY
FROM WORKSHEET_PAYROLL_VW w1
INNER JOIN WORKSHEET w3
ON w3.WORKSHEET_ID = w1.WORKSHEET_ID
WHERE w1.EFFECTIVE_DATE = CASE
WHEN #p_MOST_RECENT_ONLY = 'Y'
THEN (SELECT MAX(w2.EFFECTIVE_DATE)
FROM WORKSHEET_PAYROLL_VW w2
WHERE w1.ASSIGNMENT_ID = w2.ASSIGNMENT_ID
AND (ISNULL(#p_WKS_EFFECTIVE_DATE,w2.EFFECTIVE_DATE) =w2.EFFECTIVE_DATE))
ELSE ISNULL(#p_WKS_EFFECTIVE_DATE,w1.EFFECTIVE_DATE)
END
)
PERSON_WKS
ON PERSON_WKS.ASSIGNMENT_ID = dbo.FN_GETRPTASSIGNMENTID(EMPLEE.PERSON_ID)
INNER JOIN
(SELECT ASSIGNMENT_ID, VALUE
FROM ASSIGNMENT_HISTORY AH
WHERE FIELD_NAME ='HOME PAYROLL GROUP'
AND EFFECTIVE_DATE = (SELECT MAX(EFFECTIVE_DATE)
FROM ASSIGNMENT_HISTORY
WHERE ASSIGNMENT_ID = AH.ASSIGNMENT_ID
AND EFFECTIVE_DATE <=getDate()
AND FIELD_NAME = 'HOME PAYROLL GROUP')
)HOME_PAYROLL
ON HOME_PAYROLL.ASSIGNMENT_ID = dbo.FN_GETRPTASSIGNMENTID(EMPLEE.PERSON_ID)
WHERE
(#p_SELECTED_PERSON_ONLY = 'N' OR EMPLEE.PERSON_ID = #p_PERSON_ID)
AND
(#p_ASGN_STAT_CODE IS NULL OR PERSON_ASGN.ASGN_STAT_CODE = SUBSTRING(#p_ASGN_STAT_CODE,1,1)
OR PERSON_ASGN.ASGN_STAT_CODE = SUBSTRING(#p_ASGN_STAT_CODE,2,1))
AND
(#p_POLICY_ID IS NULL OR PERSON_ASGN.PROGRAM_CODE = #p_POLICY_ID)
AND
(#p_HOME_COUNTRY_ID IS NULL OR PERSON_ASGN.HOMECOUNTRYID=#p_HOME_COUNTRY_ID)
AND
(#p_HOME_CITY_ID IS NULL OR PERSON_ASGN.HOMECITYID=#p_HOME_CITY_ID )
AND
(#p_HOME_COMPANY_ID IS NULL OR PERSON_ASGN.HOMEBUSINESSID=#p_HOME_COMPANY_ID )
AND
(#p_HOME_DIVISION_ID IS NULL OR PERSON_ASGN.HOMECOMPONENTID=#p_HOME_DIVISION_ID )
AND
(#p_HOST_COUNTRY_ID IS NULL OR PERSON_ASGN.HOSTCOUNTRYID=#p_HOST_COUNTRY_ID )
AND
(#p_HOST_CITY_ID IS NULL OR PERSON_ASGN.HOSTCITYID=#p_HOST_CITY_ID )
AND
(#p_HOST_COMPANY_ID IS NULL OR PERSON_ASGN.HOSTBUSINESSID=#p_HOST_COMPANY_ID )
AND
(#p_HOST_DIVISION_ID IS NULL OR PERSON_ASGN.HOSTCOMPONENTID=#p_HOST_DIVISION_ID )
AND
(#p_CREATED_BY IS NULL OR PERSON_WKS.CREATED_BY=#p_CREATED_BY )
AND
(#p_APPROVED_BY IS NULL OR PERSON_WKS.APPROVED_BY=#p_APPROVED_BY )
AND
(#p_payroll_code IS NULL OR HOME_PAYROLL.VALUE=#p_payroll_code )
ORDER BY PER.LAST_NAME ASC,
PER.FIRST_NAME ASC,
PERSON_WKS.EFFECTIVE_DATE DESC
The Function in the 5th line is the one which is running slow. rest of the part is running in 4secs
The FUNCTION:
BEGIN
DECLARE
#v_ASGN_COUNT INT,
#v_RESULT INT
SELECT #v_ASGN_COUNT = COUNT(ASSIGNMENT_ID) --to find out if this employee has any assignment
FROM ASSIGNMENT
WHERE EXPATRIATE_PERSON_ID = #p_PERSON_ID AND
ASGN_STAT_CODE IN ('PD','A','I')
IF(#v_ASGN_COUNT > 0) --yes assignment, check against SECURITY_ASSIGNMENT_VW
BEGIN
SELECT #v_RESULT = COUNT(ASSIGNMENT_ID)
FROM SECURITY_ASSIGNMENT_VW
WHERE SEC_ACCOUNT_ID = #p_SEC_ACCOUNT_ID AND
ASSIGNMENT_ID IN (SELECT ASSIGNMENT_ID
FROM ASSIGNMENT
WHERE EXPATRIATE_PERSON_ID = #p_PERSON_ID AND
ASGN_STAT_CODE IN ('PD','A','I'))
END
ELSE --no assignment, so check against SECURITY_PERSON_VW
BEGIN
SELECT #v_RESULT = COUNT(PERSON_ID)
FROM SECURITY_PERSON_VW
WHERE SEC_ACCOUNT_ID = #p_SEC_ACCOUNT_ID AND
PERSON_ID = #p_PERSON_ID
END
RETURN #v_RESULT
END
Do the schemas match exactly... in particular check for missing indexes.
Well to begin with you have scalar functions which will run significantly slower as the number of records increase becasue they process row-by-agonizing-row. Not only that you've used the functions in joins which is a horrible practice if you need performance. You have a bunch of OR conditions which tend to slowness. And while it is too hard to actually read the code you posted (please try to format and only use all caps for keywords), I would suspect that some of those conditions are not sargable.
To know what is actually happening check the Execution plan (SQL Server) or Explain Plan (mySQL and others I think) or the equivalent feature in your database. Likely you wil find table scans which of course are going to get significantly slower as the number of records increases.
You may also have a problem with parameter sniffing. Please google to see how to fix that.
One improvement would be to make sure that dbo.FN_GETRPTSSIGNMENTID only gets executed once.
Currently, it gets executed three times.
You can replace two of those calls by joining to the field of the (one) remaing call.
Something like
SELECT WORKSHEET_ID
FROM PERSON PER
INNER JOIN PERSON EMPLEE ON EMPLEE.PERSON_ID = PER.PERSON_ID AND dbo.FN_CHECKRPTSECURITY(EMPLEE.PERSON_ID, #p_SEC_ACCOUNT_ID) > 0
INNER JOIN (
SELECT w1.ASSIGNMENT_ID
, w1.WORKSHEET_ID
, w1.EFFECTIVE_DATE
, w1.APPROVED_BY
, w3.CREATED_BY
FROM WORKSHEET_PAYROLL_VW w1
INNER JOIN WORKSHEET w3 ON w3.WORKSHEET_ID = w1.WORKSHEET_ID
WHERE w1.EFFECTIVE_DATE =
CASE WHEN #p_MOST_RECENT_ONLY = 'Y'
THEN (
SELECT MAX(w2.EFFECTIVE_DATE)
FROM WORKSHEET_PAYROLL_VW w2
WHERE w1.ASSIGNMENT_ID = w2.ASSIGNMENT_ID AND (ISNULL(#p_WKS_EFFECTIVE_DATE,w2.EFFECTIVE_DATE) = w2.EFFECTIVE_DATE)
)
ELSE ISNULL(#p_WKS_EFFECTIVE_DATE,w1.EFFECTIVE_DATE)
END
) PERSON_WKS ON PERSON_WKS.ASSIGNMENT_ID = dbo.FN_GETRPTASSIGNMENTID(EMPLEE.PERSON_ID)
INNER JOIN (
SELECT ASSIGNMENT_ID
, VALUE
FROM ASSIGNMENT_HISTORY AH
WHERE FIELD_NAME ='HOME PAYROLL GROUP'
AND EFFECTIVE_DATE = (
SELECT MAX(EFFECTIVE_DATE)
FROM ASSIGNMENT_HISTORY
WHERE ASSIGNMENT_ID = AH.ASSIGNMENT_ID
AND EFFECTIVE_DATE <=getDate()
AND FIELD_NAME = 'HOME PAYROLL GROUP'
)
LEFT JOIN SEARCH_ASSIGNMENT_VW PERSON_ASGN ON PERSON_ASGN.ASSIGNMENT_ID = PERSON_WKS.ASSIGNMENT_ID
LEFT JOIN LOOKUP EMPLEE_ASGN_STAT ON EMPLEE_ASGN_STAT.TYPE_ = 'ASSIGNMMENT_STATUS_CODE' AND EMPLEE_ASGN_STAT.CODE = PERSON_ASGN.ASGN_STAT_CODE
) HOME_PAYROLL ON HOME_PAYROLL.ASSIGNMENT_ID = PERSON_WKS.ASSIGNMENT_ID
WHERE (#p_SELECTED_PERSON_ONLY = 'N' OR EMPLEE.PERSON_ID = #p_PERSON_ID)
AND (#p_ASGN_STAT_CODE IS NULL OR PERSON_ASGN.ASGN_STAT_CODE = SUBSTRING(#p_ASGN_STAT_CODE,1,1) OR PERSON_ASGN.ASGN_STAT_CODE = SUBSTRING(#p_ASGN_STAT_CODE,2,1))
AND (#p_POLICY_ID IS NULL OR PERSON_ASGN.PROGRAM_CODE = #p_POLICY_ID)
AND (#p_HOME_COUNTRY_ID IS NULL OR PERSON_ASGN.HOMECOUNTRYID=#p_HOME_COUNTRY_ID)
AND (#p_HOME_CITY_ID IS NULL OR PERSON_ASGN.HOMECITYID=#p_HOME_CITY_ID )
AND (#p_HOME_COMPANY_ID IS NULL OR PERSON_ASGN.HOMEBUSINESSID=#p_HOME_COMPANY_ID )
AND (#p_HOME_DIVISION_ID IS NULL OR PERSON_ASGN.HOMECOMPONENTID=#p_HOME_DIVISION_ID )
AND (#p_HOST_COUNTRY_ID IS NULL OR PERSON_ASGN.HOSTCOUNTRYID=#p_HOST_COUNTRY_ID )
AND (#p_HOST_CITY_ID IS NULL OR PERSON_ASGN.HOSTCITYID=#p_HOST_CITY_ID )
AND (#p_HOST_COMPANY_ID IS NULL OR PERSON_ASGN.HOSTBUSINESSID=#p_HOST_COMPANY_ID )
AND (#p_HOST_DIVISION_ID IS NULL OR PERSON_ASGN.HOSTCOMPONENTID=#p_HOST_DIVISION_ID )
AND (#p_CREATED_BY IS NULL OR PERSON_WKS.CREATED_BY=#p_CREATED_BY )
AND (#p_APPROVED_BY IS NULL OR PERSON_WKS.APPROVED_BY=#p_APPROVED_BY )
AND (#p_payroll_code IS NULL OR HOME_PAYROLL.VALUE=#p_payroll_code )
ORDER BY
PER.LAST_NAME ASC
, PER.FIRST_NAME ASC
, PERSON_WKS.EFFECTIVE_DATE DESC