I'm trying to setup Pycharm such that my local changes are automatically deployed to a remote server.
I can ssh remoteserver and also sftp remoteserver from the terminal so access is not an issue. But if I try to setup deployment in Pycharm using SFTP, it can't establish the connection.
My best guess is that it's an authentication issue. When running the ssh or sftp commands separately, I've never needed to enter a username or password, so I suppose the auth is happening via Private Key. But the problem is that I'm not sure where the Private Key actually is (I'm in an unfamiliar dev environment).
So either
How do I know which Private Key I'm using when running ssh or sftp?
Any other way to resolve the problem.
Thanks!
As to (1), the SSH man page says (under the -i option) "The default is ~/.ssh/identity for protocol version 1, and ~/.ssh/id_rsa and ~/.ssh/id_dsa for protocol version 2. Identity files may also be specified on a per-host basis in the configuration file."
The configuration file is ~/.ssh/config, and the key file for a particular host is specified with IdentityFile.
You can also run ssh with -vvv parameter. The location of the private key file will be printed out (if key authentication is used).
Related
I am trying to SSH into the server as part of the deployment job in CircleCI
ssh -oStrictHostKeyChecking=no $DEV_DROPLET_USER#$DEV_DROPLET_IP
I have my SSH private key for the user on this server loaded into CircleCI but everytime I run the job, I get this output
Warning: Permanently added '$host' (ECDSA) to the list of known hosts.
<$user>#<$host>'s password:
How can I stop it prompting me for the password?
I have added the SSH key for this user to the SSH Agent on the server (these instructions)
For a passwordless ssh connection, you must:
put the private ssh key into a file in the directory $HOME/.ssh/ on the client computer connecting to the server (example : $HOME/.ssh/MyServer)
copy the public ssh key into the file $HOME/.ssh/authorized_keys on the server
have writing permission on the file $HOME/.ssh/known_hosts on the client computer
The sshd service is normally already configured to accept key based authentication.
From the client computer, you can now do a passwordless connection ssh -i $HOME/.ssh/MyServer $DEV_DROPLET_USER#$DEV_DROPLET_IP
Of course, on the client computer your $DEV_DROPLET_USER must have appropriate permissions for accessing the ssh related files.
You don’t need to do anything with the ssh agent, on the client or on the server.
Late reply, but I hope it helps somebody else in the future.
Assuming you followed these instructions in the CircleCI docs, then the private key will automatically be copied to the machine being used by CircleCI when the add_ssh_keys step is run.
Make sure one the server you are trying to SSH into, the public key generated (in ~/.ssh/id_rsa.pub or something similar) is copied to the ~/.ssh/authorized_hosts file on the same server. This crucial step is what allows anybody with the private key (CircleCI) to be allowed into the server.
I can connect using these credentials through ftp but not through ssh.
Timothy#ement MINGW64 ~
$ ssh timothy#mywebsite.com
ssh: connect to host mywebsite.com port 22: Connection timed out
I'm sure this question has been asked a million times before. Does it have anything to do with ssh keys?
I'm using siteground and in the ssh/shell access area i've added this:
t r timothy#mywebsite.com KtV/T4QvP4K9n7Zki9n+ZWp6 0.0.0.0/0 - ALL Remove Key | Add IP | Private Key
any help would be appreciated. Thank you.
Does it have anything to do with ssh keys?
Yes: see the official SiteGround documentation How to use SSH.
you need to enable ssh access and register your public ssh key.
then you can use ssh (provided in your <path-to-git>/usr/bin) in order to access
ssh -p18765 <user>#yourdomain
SiteGround chooses to run its sshd on port 18765, not the default 22.
The siteground tutorials are junk, two out of the three chat support staff I spoke with just referred me to the tutorials when I was attempting to make a connection to my siteground server over ssh.
These are the steps that finally worked:
From the cPanel Advanced section select SSH/Shell Access
Generate a new key using their utility (make note of the password you used for later use).
*** They have a tutorial that should allow you to create a private key on linux then upload the public key to their site. That is "not recommended" and I was unable to get that to work.
Once you have their key listed in the current keys table click the Private Key link
Copy the Private Key to a file in your local .ssh directory (make sure the mask is 0600)
run the following command:
ssh-add
enter the passphrase you used when generating the key using their utility
If you get a response "Identity added: ..." you are all set
you should now be able to use the command:
ssh # -p18765
It doesn't look like they have X11 forwarding enabled though so if you use ssh -X you will get:
X11 forwarding request failed on channel 0
In SourceTree I'm using OpenSSH as authentication and created + added my SSH keys (on Windows) like this:
ssh-keygen -t rsa -C "my#email.com"
(and entered filename, password etc)
Added the key to the SSH agent:
eval "$(ssh-agent)"
ssh-add id_rsa
Added the SSH key to GitLab using
cat id_rsa.pub to print my public key
Added the public key to SourceTree by "Tools > Add SSH key" followed by the password ("Tools > options > SSH client configuration" I've selected OpenSSH).
After these steps I'm able to push and pull code.
However, each time I restart SourceTree a terminal pops-up and I have to re-enter my password again*. How can I make SourceTree / the SSH agent remember this password?
ps. my keys are saved in a directory like /d/MyName/Gitlab/ instead of ~/.ssh/ but that shouldn't be a problem, right?
EDIT:
*The message shown in the terminal:
SourceTree is loading your SSH key into the agent for authentication Please enter your passphrase if prompted to do so Enter passphrase for D:\MyName\GitLab\.ssh\id_rsa:
EDIT2:
This solution didn't solve my problem either:
You can use the Windows OpenSSH ssh-agent to manage your keys.
The problem is that Sourcetree on windows wants to start its own instance of the ssh-agent instead of using the already running service. Even if you can get that to work it will still prompt for your key passphrase on startup because Sourcetree's ssh-agent process doesn't save your keys to the the Windows keychain.
There are heaps of instructions on how to use Pageant as your ssh agent, but that is not why you're here. You're here because you want to use the OpenSSH agent, with OpenSSH formatted keys, with passphrases but without being prompted for said passphrase all over the place.
The trick is to proxy all requests to Pageant through to your OpenSSH agent.
Install OpenSSH.
Start the ssh-agent service and set to automatic.
Add your private keys to the agent with
ssh-add <key_file>
Add your public keys to the hosts you want to authenticate with.
Test that you can authenticate via ssh:
ssh -T git#github.com
Your private keys will now be loaded when you log in to your Windows account and you won't have to provide passphrases ever again.
To allow programs and libraries such as Sourcetree, WinSCP and Fabric that normally use Pageant to instead have keys provided by the ssh-agent there is an awesome program https://github.com/ndbeals/winssh-pageant
Follow instructions to install winssh-pageant, schedule it as a task to start on windows startup.
Now all calls to Pageant's NamedPipe will be proxied to the OpenSSH agent.
The last step to get SourceTree working with OpenSSH is a bit counter-intuitive.
Go to Tools | Options | General and set the SSH Client to PuTTY/Plink and uncheck the "Automatically start SSH agent when Sourcetree opens".
I solved this issue following these steps:
Find the path to Pageant (in my case was in C:\Users\{my-user}\AppData\Local\SourceTree\app-3.3.8\tools\putty\pageant.exe)
Do Window key + R or type run in Windows bar
In the text box put shell:startup
Make a shortcut of your pageant and paste it in the window that just opened
Right click on the shortcut and click on Properties
In Shortcut tab, in target put your-sourcetree-pageant-path\pageant.exe id_rsa.ppk
In Start in put C:\Users\{my-user}\.ssh and click ok
Note that your id_rsa.ppk must be inside C:\Users\{my-user}\.ssh directory
If for some reason your id_rsa.ppk is protected by a passphrase and you are sure you won't have security issues. Just remove the passphrase.
To remove the id_rsa.ppk's passphrase, follow these steps
Open PuttyGen
Go to Conversions => Import key
Remove the passphrase
Save the private key & public key
Replace the protected id_rsa.ppk with the unprotected id_rsa.ppk
Hope that helped!
You manually start your agent and set environment variables in order for commands to find it.
Whenever you start your a command (like SourceTree) without those environment variables set, that command is not able to access the agent and therefore asks for your password.
Making your agent start on system startup should solve things.
If ssh cannot reach the agent it will also look into ~/.ssh/ therefor if you place you keys there it should work, too. (Have a look at man ssh.)
After did below test, the password never asked for me.
To test whether your SSH key was added correctly, run the following command in your terminal (replacing gitlab.com with your GitLab's instance domain):
ssh -T git#gitlab.com
The first time you connect to GitLab via SSH, you should verify the authenticity of the GitLab host that you're connecting to. For example, when connecting to GitLab.com, answer yes to add GitLab.com to the list of trusted hosts:
The authenticity of host 'gitlab.com (35.231.145.151)' can't be established.
ECDSA key fingerprint is SHA256:HbW3g8zUjNSksFbqTiUWPWg2Bq1x8xdGUrliXFzSnUw.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'gitlab.com' (ECDSA) to the list of known hosts.
NOTE: Note: For GitLab.com, consult the SSH host keys fingerprints, section to make sure you're connecting to the correct server. For example, you can see the ECDSA key fingerprint shown above in the linked section.
Once added to the list of known hosts, you should validate the authenticity of GitLab's host again. Run the above command once more, and you should only receive a Welcome to GitLab, #username! message.
If the welcome message doesn't appear, you can troubleshoot the problem by running ssh in verbose mode with the following command:
ssh -Tvvv git#gitlab.com
I'm sorry to have to ask this question, but I feel like I've tried every answer so far on SO with no luck.
I have my local machine and my remote server. Jenkins is up and running on my server.
If I open up terminal and do something like scp /path/to/file user#server:/path/to/wherever then my ssh works fine without requiring a password
If I run this command inside of my Jenkins job I get 'Host Key Verification Failed'
So I know my SSH is working correctly the way I want, but why can't I get Jenkins to use this SSH key?
Interesting thing is, it did work fine when I first set up Jenkins and the key, then I think I restarted my local machine, or restarted Jenkins, then it stopped working. It's hard to say exactly what caused it.
I've also tried several options regarding ssh-agent and ssh-add but those don't seem to work.
I verified the local machine .pub is on the server in the /user/.ssh folder and is also in the authorized keys file. The folder is owned by user.
Any thoughts would be much appreciated and I can provide more info about my problem. Thanks!
Update:
Per Kensters suggestion I did su - jenkins, then ssh server, and it asked me to add to known hosts. So I thought this was a step in the right direction. But the same problem persisted afterward.
Something I did not notice before I can ssh server without password when using my myUsername account. But if I switch to the jenkins user, then it asks me for my password when I do ssh server.
I also tried ssh-keygen -R server as suggested to no avail.
Try
su jenkins
ssh-keyscan YOUR-HOSTNAME >> ~/.ssh/known_hosts
SSH Slaves Plugin doesn't support ECDSA. The command above should add RSA key for ssh-slave.
Host Key Verification Failed
ssh is complaining about the remote host key, not the local key that you're trying to use for authentication.
Every SSH server has a host key which is used to identify the server to the client. This helps prevent clients from connecting to servers which are impersonating the intended server. The first time you use ssh to connect to a particular host, ssh will normally prompt you to accept the remote host's host key, then store the key locally so that ssh will recognize the key in the future. The widely used OpenSSH ssh program stores known host keys in a file .ssh/known_hosts within each user's home directory.
In this case, one of two things is happening:
The user ID that Jenkins is using to run these jobs has never connected to this particular remote host before, and doesn't have the remote host's host key in its known_hosts file.
The remote host key has changed for some reason, and it no longer matches the key which is stored in the Jenkins user's known_hosts file.
You need to update the known_hosts file for the user which jenkins is using to run these ssh operations. You need to remove any old host key for this host from the file, then add the host's new host key to the file. The simplest way is to use su or sudo to become the Jenkins user, then run ssh interactively to connect to the remote server:
$ ssh server
If ssh prompts you to accept a host key, say yes, and you're done. You don't even have to finish logging in. If it prints a big scary warning that the host key has changed, run this to remove the existing host from known_hosts:
$ ssh-keygen -R server
Then rerun the ssh command.
One thing to be aware of: you can't use a passphrase when you generate a key that you're going to use with Jenkins, because it gives you no opportunity to enter such a thing (seeing as it runs automated jobs with no human intervention).
I am trying log in to one of my projects at sagemath cloud using SSH (I am using OS X 10.10.1) after adding the local copy of the public key (~/.ssh/id_rsa.pub) to the authorized_keys file in the .ssh subdirectory of the project on the remote host, which is 162.222.176.40:
$ ssh <project id>#162.222.176.40
The authenticity of host '162.222.176.40 (162.222.176.40)' can't be established.
RSA key fingerprint is 3a:40:8e:77:88:7e:f8:68:0c:28:4a:32:f8:4a:4a:25.
Are you sure you want to continue connecting (yes/no)? yes
Is this as expected? I did check ~/.ssh/known_hosts and this host does not appear. I am guessing it will be added once I log in for the first time.
It's normal to see a message like that once upon first connecting to a server. If it asks if it's ok to continue connecting, just say "yes". That public key will then be added to your local ~/.ssh/known_hosts file (associated with that IP address or domain).
There's only a problem if you see this message every time you connect to a server. In that case, the problem might be that the given key is already in your local computer's ~/.ssh/known_hosts file, but is associated there with a different IP address or domain. Try removing that line of the file, or just clearing that file completely.