The below SQL query is in a SQL Server 2017. I want when the value of UtenteCliente.CostoFatturazionePersonalizzato is 0 or null is configured with the value of Utente.CostoFatturazione, to do this I use the query below but the result always returns null.
How can I do this?
SQL Query:
SELECT
IIF (UtenteCliente.CostoFatturazionePersonalizzato < 0
OR UtenteCliente.CostoFatturazionePersonalizzato IS NULL,
Utente.CostoFatturazione, UtenteCliente.CostoFatturazionePersonalizzato) AS costo
FROM
Utente
INNER JOIN
UtenteCliente ON Utente.IdUtente = UtenteCliente.IdUtente
WHERE
Utente.IdUtente = 2
AND UtenteCliente.IdCliente = 6
You can use CASE expression instead IIF():
SELECT (CASE WHEN ISNULL(UtenteCliente.CostoFatturazionePersonalizzato, 0) = 0
THEN Utente.CostoFatturazione
ELSE UtenteCliente.CostoFatturazionePersonalizzato
END) AS costo
FROM Utente INNER JOIN
UtenteCliente
ON Utente.IdUtente = UtenteCliente.IdUtente
WHERE Utente.IdUtente = 2 AND
UtenteCliente.IdCliente = 6;
I was trying to do a inner join with 3 tables in a update query. I tried to find the solution in multiple sites but didn't get the solution.
Following a sample query I am trying:
UPDATE TGT
SET C1 = CASE WHEN TGT.c2 = SRC.c2 AND SRC.C3 = 'P' THEN SRC.C1 ELSE NULL END,
C2 = CASE WHEN TGT.c2 = SRC.c2 AND SRC.C3 = 'D' THEN SRC.C1 ELSE NULL END
FROM SRC
INNER JOIN SRC1
ON SRC.C9 = SRC1.C9
AND SRC.C9 = TGT.C9;
Thanks in Advance!!
I would expect your syntax to work. (I don't have Vertica handy but its query parser is based on Postgres.)
Perhaps -- unlike Postgres -- JOIN is not allowed in the FROM. Then you can put the join conditions in the WHERE clause:
UPDATE TGT
SET C1 = (CASE WHEN TGT.c2 = SRC.c2 AND SRC.C3 = 'P' THEN SRC.C1 END)
C2 = (CASE WHEN TGT.c2 = SRC.c2 AND SRC.C3 = 'D' THEN SRC.C1 END)
FROM SRC, SRC1
WHERE SRC.C9 = SRC1.C9 AND SRC.C9 = TGT.C9;
I want to join two tables and group by the result based on a user defined parameter in Sql Server 2008. I tried the query below but it is not working. I appreciate if someone helps me to see my mistake and correct it for me. Regards.
Select TotalVolume= SUM(volume),
PrimGroup = r.PrimaryGroup, SnGroup = r.SecondaryGroup
from Requests r
inner join #Calculations c on
case #PrimaryId is not null then c.PrimaryGroup = r.PrimaryGroup end
and case #SecondaryId is not null then c.SecondaryGroup = r.SecondaryGroup end
and c.SrgId = r.SrgId
group by
case #PrimaryId is not null then r.PrimaryGroup end,
case #SecondaryId is not null then r.SecondaryGroup end
Try this:
Select TotalVolume= SUM(volume),
PrimGroup = r.PrimaryGroup, SnGroup = r.SecondaryGroup
from Requests r
inner join #Calculations c on
((#PrimaryId is null) or
(#PrimaryId is not null) and c.PrimaryGroup = r.PrimaryGroup)
and ((#SecondaryId is null) or
(#SecondaryId is not null) and c.SecondaryGroup = r.SecondaryGroup)
and c.SrgId = r.SrgId
group by
case when #PrimaryId is not null then r.PrimaryGroup end,
case when #SecondaryId is not null then r.SecondaryGroup end
I'm using business object 4 and currently developing a report using custom SQL. Total object and data type selected using custom sql and object at webbi already the same. But when I try to validate webbi always sends error cannot generate sql.
How to fix this and what is the cause of this error?
My sql syntax is as follows:
select * from(
SELECT
DISTINCT
CASE WHEN TRIM(msv26A.PROJECT_NO) IS NULL THEN msvPRJ.PROJECT_NO ELSE msv26A.PROJECT_NO END,
msv660.PROJ_DESC,
msv26A.PO_NO,
msv200.SUPPLIER_NAME,
msv26A.SUPPLIER_NO,
msv260.EXT_INV_NO,
msv200.SUP_TYPEX1,
msv260.CURRENCY_TYPE,
msv000_DC0001.DSTRCT_CODE,
msv000_DC0001.DSTRCT_NAME,
msv260.PMT_STATUS,
msv260.DUE_DATE,
msv260.INV_DATE,
msv260.FOR_INV_ORIG,
msv260.LOC_INV_ORIG,
msv260.FOR_INV_AMD,
msv260.LOC_INV_AMD,
msv260.AMT_RETAINED,
msv260.PRESC_PMT_AMT,
msv260.PP_AMT_LOC,
msv260_1.AMT_PAID_FOR,
msv071.REF_CODE,
CASE WHEN EMV260_AGING_RETENTION.LOC_INV_RETENTION IS NULL THEN 0 ELSE EMV260_AGING_RETENTION.LOC_INV_RETENTION END,
CASE WHEN EMV260_AGING_RETENTION.FOR_INV_RETENTION IS NULL THEN 0 ELSE EMV260_AGING_RETENTION.FOR_INV_RETENTION END
FROM
msv200 RIGHT OUTER JOIN msv26A ON (msv26A.SUPPLIER_NO = msv200.SUPPLIER_NO)
INNER JOIN msv000_DC0001 ON (msv000_DC0001.DSTRCT_CODE = msv26A.DSTRCT_CODE)
INNER JOIN msv260 ON (msv26A.DSTRCT_CODE = msv260.DSTRCT_CODE AND msv26A.SUPPLIER_NO = msv260.SUPPLIER_NO AND msv26A.INV_NO = msv260.INV_NO)
LEFT OUTER JOIN msvPRJ ON (msvPRJ.DSTRCT_CODE = msv26A.DSTRCT_CODE AND TRIM(msvPRJ.PO_NO) = trim(msv26A.PO_NO))
LEFT OUTER JOIN msv660 ON (msv26A.DSTRCT_CODE = msv660.DSTRCT_CODE AND (CASE WHEN TRIM(msv26A.PROJECT_NO) IS NULL
THEN msvPRJ.PROJECT_NO ELSE msv26A.PROJECT_NO END) = msv660.PROJECT_NO)
LEFT OUTER JOIN msv260 msv260_1 ON (msv260_1.DSTRCT_CODE = msv260.DSTRCT_CODE and msv260_1.SUPPLIER_NO = msv260.SUPPLIER_NO and msv260_1.INV_NO = msv260.INV_NO)
LEFT OUTER JOIN msv071 ON (msv071.ENTITY_VALUE=msv260.SUPPLIER_NO AND msv071.ENTITY_TYPE='SUP')
LEFT OUTER JOIN (SELECT A.DSTRCT_CODE,
A.SUPPLIER_NO,
A.ORIG_INV_NO,
SUM(CASE WHEN A.LOC_INV_AMD <> 0
THEN A.LOC_INV_AMD ELSE A.LOC_INV_ORIG END) LOC_INV_RETENTION,
SUM(CASE WHEN A.FOR_INV_AMD <> 0
THEN A.FOR_INV_AMD ELSE A.FOR_INV_ORIG END) FOR_INV_RETENTION
FROM msv260 A
WHERE A.FULL_PER_LOADED <= #prompt('Enter Full Period(From):','A','260\Full Per Loaded',Mono,Free,Persistent,,User :3)
AND TRIM(A.PMT_STATUS) >= '30' AND TRIM(A.PMT_STATUS) <= '55'
GROUP BY
A.DSTRCT_CODE,
A.SUPPLIER_NO,
A.ORIG_INV_NO) EMV260_AGING_RETENTION
ON (msv260.DSTRCT_CODE = EMV260_AGING_RETENTION.DSTRCT_CODE
AND msv260.SUPPLIER_NO = EMV260_AGING_RETENTION.SUPPLIER_NO
AND msv260.INV_NO = EMV260_AGING_RETENTION.ORIG_INV_NO)
WHERE
msv26A.DSTRCT_CODE in #prompt('Enter value(s) for Dstrct Code:','A','msv26a\Dstrct Code',Multi,Free,Persistent,,User:5)
AND
TRIM(msv260.PMT_STATUS) >= '30' AND TRIM(msv260.PMT_STATUS) <= '55'
AND
(
( msv260.FULL_PER_LOADED <= #prompt('Enter Full Period(From):','A','260\Full Per Loaded',Mono,Free,Persistent,,User :3)
AND msv260.FULL_PER_PAID = '000000' )
OR
( msv260.FULL_PER_PAID > #prompt('Enter Full Period(To):','A','260\Full Per Paid',Mono,Free,Persistent,,User :4)
AND msv260.FULL_PER_LOADED <= #prompt('Enter Full Period(From):','A','260\Full Per Loaded',Mono,Free,Persistent,,User :3) )
)
AND msv260.CURRENCY_TYPE <> ' '
ORDER BY msv000_DC0001.DSTRCT_CODE, msv260.SUPPLIER_NO, msv200.SUP_TYPEX1, msv260.CURRENCY_TYPE)
WHERE (DSTRCT_CODE,SUPPLIER_NO,EXT_INV_NO) IN (SELECT
DISTINCT DSTRCT_CODE,SUPPLIER_NO,EXT_INV_NO FROM msv900
WHERE DSTRCT_CODE in #prompt('Enter value(s) for Dstrct Code:','A','msv900\Dstrct Code',Multi,Free,Persistent,,User:1)
AND FULL_PERIOD <= #prompt('Enter Full Period(From):','A','msv900\Full Period',Mono,Free,Persistent,,User :2)
AND ACCOUNT_CODE IN ('21101')
)
ORDER BY
PROJECT_NO,
SUPPLIER_NO
select
tmp.templatedesc Template
,sec.name Section
,q.questiontext Questions,
--,sum(case when q.responserequired = '0' then 1 else null end) as 'N/A'
--,sum(case when q.responserequired = '1' then 1 else null end) as Scored
--,count (case when (qr.weightedscore is not null and tmp.templatedesc = 'QA 30 Day Call Form' and
--sec.name = 'opening' and
--rv.reviewstatusid = 1 )then 1 else null end) as scored
----,(case when qr.weightedscore <> q.weight then rv.reviewid else null end) as fail
--count (case when qr.weightedscore is null then 1 else null end) NA,
--count (case when qr.weightedscore is not null then 1 else null end) scored,
sec.sequencenumber, q.questionnumber, qr.*
from
aqm.dbo.reviewtemplate tmp (nolock)
inner join aqm.dbo.section sec on sec.templateid =tmp.templateid
inner join aqm.dbo.sectionresult scr on scr.sectionid = sec.sectionid
inner join aqm.dbo.questionresult qr on qr.sectionresultid = scr.sectionresultid
inner join aqm.dbo.question q on q.questionid = qr.questionid
--inner join aqm.dbo.questiontype qt on qt.questiontypeid = q.questiontypeid
--left outer join aqm.dbo.questionoption qo on qo.questionid = q.questionid
inner join aqm.dbo.review rv on tmp.templateid = rv.templateid
inner join aqm.dbo.media md on md.mediaid = rv.mediaid
inner join aqm.dbo.iqmuser ut on md.userid = ut.userid
where
rv.reviewstatusid = 1 and
tmp.templatedesc = 'QA 30 Day Call Form'
and sec.name = 'opening' and
convert(varchar,dateadd(hh,-7,rv.reviewdate), 101) = '07/07/2014'
and ut.windowslogonaccount = 'name.name'
and q.questionnumber = 4
--group by
--tmp.templatedesc , sec.name, q.questiontext, sec.sequencenumber, q.questionnumber
order by
sec.sequencenumber, q.questionnumber
the questionresultid and sectionresultid are returning multiple values
how can i fix the joins so that it doesnt return multiple values?
i have it drilled down to a date and a person so that it should only return one row of results( but that obviously didnt work)
not sure what other data i can provide
update
i think it has to do with joins
inner join aqm.dbo.sectionresult scr on scr.sectionid = sec.sectionid
inner join aqm.dbo.questionresult qr on qr.sectionresultid = scr.sectionresultid
as those are the ones returning multiple results.
just dont know how to fix it
First, neither aqm.dbo.questiontype nor aqm.dbo.questionoption are used in your return fields or your where clause so get rid of them if they aren't required.
Second, you are OUTER JOINing on the aqm.dbo.review, but the reviewstatusid and reviewdate are required in the WHERE clause - so this should probably be an INNER JOIN.
Last, best way to debug issues like this is to comment out the COUNT statements and the GROUP BY clause - and see what raw data is being returned.