And again, I am having issues with regex.
Well basically I want to extract info from a website, and get it in a textbox.
what I want to be extracted
So as you can see, the part what says 11111 must be enabled to also extract letters instead of only numbers.
I use this code:
Dim mcol As MatchCollection = Regex.Matches(source, "/player/\d+"">(.+)</a>")
How can I make it to extract not only numbers, but both.
So it will be enable to extract a MD5 hash?
Kind regards
/\w+/i it will match any alphanumeric character with case insensitive modifier. As we know that MD5 is 32 digit hexadecimal number so the above regex may be useful in your case.
Related
I was given a task to encrypt a string, but I must create my own encryption techniques.
I have an idea of how to do it. I can associate each value in a string with a number, like so:
A = 0
B = 1
...
And then I want to substitute characters for digits in the tens and higher: if I enter the string "DOG" it must display
3.46 // . is 1 and .. is 2
// .4 is 14
I would like hear your ideas.
I was given a visual basic form to work on. I can enter a string; that is fine.
Input = txtInputString.Text
But I also have to decrypt a string. To show I want to decrypt the string I have to have
string, false
, the false showing that i want to decrypt the string. How do i do this?
Encryption and decryption of simple English text is fairly quite forward if you use a simple method such as Ceasar Cipher.
However you have to determine how you are going to represent all of the symbols in the language. This would include not only letters but digits and spaces and maybe punctuation as well.
The standard ASCII character set has most of what you might need for English the question is whether you want to simplify your alphabet by restricting your symbols to only upper case letters, digits, and a space. Human beings can usually read text, especially short text even if it does not have punctuation.
The approach for a simple cipher would be to have a table of the symbols in your alphabet (the upper case letters, digits zero through nine, and a space character). Next rearrange the table so that it is not in sorted order.
When doing an encrypt you would take each character, look it up in the table and determine a two digit offset within the table. This two digit number would be the encryption symbol for that character and is what you would write out as part of the string of encryption.
When doing a decrypt you would take each two digit pair and use that as an offset into the table, find the character at that location in the table, and the write the character from the table out as part of the string of decryption.
Your encrypted string would be a series of two digit pairs all strung together as one long number.
For your form, I would expect to have two text entry groups each with a button, a text entry field, and a text display field. The first group would be for the text to encrypt and that button you would press to perform an encrypt once the text is entered. The encryption text would display in the field below the text entry field.
The second group would be the text to decrypt and that button you would press to perform a decrypt.
This is related to
What are the characters that count as the same character under collation of UTF8 Unicode? And what VB.net function can be used to merge them?
This is how I plan to do this:
Use http://msdn.microsoft.com/en-us/library/dd374126%28v=vs.85%29.aspx to turn the string into
KD form.
Basically it'll turn most variation such as superscript into the normal number. Also it decompose tilda and accent into 2 characters.
Next step would be to remove all characters whose sole purpose is tildaing or accenting character.
How do I know which characters are like that? Which characters are just "composing characters"
How do I find such characters? After I find those, how do I get rid of it? Should I scan character by character and remove all such "combining characters?"
For example:
Character from 300 to 362 can be gotten rid off.
Then what?
Combining characters are listed in UnicodeData.txt as having a nonzero Canonical_Combining_Class, and a General_Category of Mn (Mark, nonspacing).
For each character in the string, call GetUnicodeCategory and check the UnicodeCategory for NonSpacingMark, SpacingCombiningMark or EnclosingMark.
You may be able to do it more efficiently using regex, eg Regex.Replace(str, "\p{M}", "").
I am trying to write a search that queries our directory server running openldap.
The users are going to be searching using the first or last name of the person they're interested in.
I found a problem with accented characters (like áéíóú), because first and last names are written in Spanish, so while the proper way is Pérez it can be written for the sake of the search as Perez, without the accent.
If I use '(cn=*Perez*)' I get only the non-accented results.
If I use '(cn=*Pérez*)' I get only accented results.
If I use '(cn=~Perez)' I get weird results (or at least nothing I can use, because while the results contain both Perez and Pérez ocurrences, I also get some results that apparently have nothing to do with the query...
In Spanish this happens quite a lot... be it lazyness, be it whatever you want to call it, the fact is that for this kind of thing people tend NOT to write the accents because it's assumend all these searches work with both options (I guess since Google allowes it, everybody assumes it's supposed to work that way).
Other than updating the database and removing all accents and trimming them on the query... can you think of another solution?
You have your ~ and = swapped above. It should be (cn~=Perez). I still don't know how well that will work. Soundex has always been strange. Since many attributes are multi-valued including cn you could store a second value on the attribute that has the extended characters converted to their base versions. You would at least have the original value to still go off of when you needed it. You could also get real fancy and prefix the converted value with something and use the valuesReturnFilter to filter it out from your results.
#Sample object
dn:cn=Pérez,ou=x,dc=y
cn:Pérez
cn:{stripped}Perez
sn:Pérez
#etc.
Then modify your query to use an or expression.
(|(cn=Pérez)(cn={stripped}Perez))
And you would include a valuesReturnFilter that looked like
(!(cn={stripped}*))
See RFC3876 http://www.networksorcery.com/enp/rfc/rfc3876.txt for details. The method for adding a request control varies by what platform/library you are using to access the directory.
Search filters ("queries") are specified by RFC2254.
Encoding:
RFC2254
actually requires filters (indirectly defined) to be an
OCTET STRING, i.e. ASCII 8-byte String:
AttributeValue is OCTET STRING,
MatchingRuleId
and AttributeDescription
are LDAPString, LDAPString is an OCTET STRING.
The standard on escaping: Use "<ASCII HEX NUMBER>" to replace special characters
(https://www.rfc-editor.org/rfc/rfc4515#page-4, examples https://www.rfc-editor.org/rfc/rfc4515#page-5).
Quote:
The <valueencoding> rule ensures that the entire filter string is a
valid UTF-8 string and provides that the octets that represent the
ASCII characters "*" (ASCII 0x2a), "(" (ASCII 0x28), ")" (ASCII
0x29), "\" (ASCII 0x5c), and NUL (ASCII 0x00) are
represented as a backslash "\" (ASCII 0x5c) followed by the two hexadecimal digits
representing the value of the encoded octet.
Additionally, you should probably replace all characters that semantically modify the filter (RFC 4515's grammar gives a list), and do a Regex replace of non-ASCII characters with wildcards (*) to be sure. This will also help you with characters like "é".
I'm trying to implement stuff similar to spell check, but I need to get the word that is limited by a space. EX: "HI HOW R U", I need to collect HI, HOW and so on as they type. i.e. After user hits HI and space I need to collect HI and do a spell check.
Check the documentation for NSString Here. You want the message componentsSepeparatedByString:.
I don't know objective-C, but I'm fairly sure it'll have a Regexp library - although it'd be straightforward to code it without one.
Regexp: \b([^\s])*\b
\b = word boundary (whitespace, comma, dot, exclamation-mark, etc.)
\s = whitespace character
[...] = character set
[^...] = negated character set (any character(s) EXCEPT ...)
() = grouping construct
* = zero or more times
So the suggested expression would start matching at any word boundary, then match every subsequent character that is not a whitespace character, then match a word boundary.
Your stated case is so simple you may just want to look for spaces (one char at a time) and get the substring, but RegExp is very widely used across a range of languages and platforms, and so it's fairly easy to find an expression when you need to - and one often does for common stuff like checking if zip codes, phone numbers, email addresses and so on are syntactically correct. So it's worth learning in any case. :)
I have a Sql statament using special character (ex: ('), (/), (&)) and I don't know how to write them in my VB.NET code. Please help me. Thanks.
Find out the Unicode code point for the character (from http://www.unicode.org) and then use ChrW to convert from the code point to the character. (To put this in another string, use concatenation. I'm somewhat surprised that VB doesn't have an escape sequence, but there we go.)
For example, for the Euro sign (U+20AC) you'd write:
Dim euro as Char = ChrW(&H20AC)
The advantage of this over putting the character directly into source code is that your source code stays "just pure ASCII" - which means you won't have any strange issues with any other program trying to read it, diff it, etc. The disadvantage is that it's harder to see the symbol in the code, of course.
The most common way seems to be to append a character of the form Chr(34)... 34 represents a double quote character. The character codes can be found from the windows program "charmap"... just windows/Run... and type charmap
If you are passing strings to be processed as SQL statement try doubling the characters for example.
"SELECT * FROM MyRecords WHERE MyRecords.MyKeyField = ""With a "" Quote"" "
The '' double works with the other special characters as well.
The ' character can be doubled up to allow it into a string e.g
lSQLSTatement = "Select * from temp where name = 'fred''s'"
Will search for all records where name = fred's
Three points:
1) The example characters you've given are not special characters. They're directly available on your keyboard. Just press the corresponding key.
2) To type characters that don't have a corresponding key on the keyboard, use this:
Alt + (the ASCII code number of the special character)
For example, to type ¿, press Alt and key in 168, which is the ASCII code for that special character.
You can use this method to type a special character in practically any program not just a VB.Net text editor.
3) What you probably looking for is what is called 'escaping' characters in a string. In your SQL query string, just place a \ before each of those characters. That should do.
Chr() is probably the most popular.
ChrW() can be used if you want to generate unicode characters
The ControlChars class contains some special and 'invisible' characters, plus the quote - for example, ControlChars.Quote