Related
I need to calculate due date / end date for SLAs. As input values I have the start date and a timespan (in minutes). This calculation needs to take into account business hours, weekends, and holidays.
I've seen a lot of examples where the input is start date and end date, but have been struggling finding anything similar to the above input values.
Is there an elegant solution to this problem? Is there a way to calculate due date without using a loop? I can't think of a way to do the calculation without doing something similar to the following terrible algorithm:
Create a return variable "due date" and set it to input variable
"start date"
Create a control variable "used minutes" and set it to 0
Create a loop with the condition "used minutes" <= "input timespan"
Inside the loop, add a second to the "due date" return variable
Inside the loop, check if the second is within hours of operation
(checking business hours, weekends, and holidays). If so, increment
control variable "used minutes" by 1.
Upon exiting the loop, return variable "due date"
You need a table with valid business hours, with the weekends and holidays excluded (or marked as weekend/holiday so you can skip them.) Each row represents one day and the number of working hours for that day. Then you query the business hours table from your start date to the first (min) date where the sum(hours*60) is greater than your minutes parameter, excluding marked weekend/holiday rows. That gives you your end date.
Here's the day table:
CREATE TABLE [dbo].[tblDay](
[dt] [datetime] NOT NULL,
[dayOfWk] [int] NULL,
[dayOfWkInMo] [int] NULL,
[isWeekend] [bit] NOT NULL,
[holidayID] [int] NULL,
[workingDayCount] [int] NULL,
CONSTRAINT [PK_tblDay] PRIMARY KEY CLUSTERED
(
[dt] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
here's how I populate the table with days:
CREATE PROCEDURE [dbo].[usp_tblDay]
AS
BEGIN
SET NOCOUNT ON;
DECLARE
#Dt datetime ,
#wkInMo int,
#firstDwOfMo int,
#holID int,
#workDayCount int,
#weekday int,
#month int,
#day int,
#isWkEnd bit
set #workDayCount = 0
SET #Dt = CONVERT( datetime, '2008-01-01' )
while #dt < '2020-01-01'
begin
delete from tblDay where dt = #dt
set #weekday = datepart( weekday, #Dt )
set #month = datepart(month,#dt)
set #day = datepart(day,#dt)
if #day = 1 -- 1st of mo
begin
set #wkInMo = 1
set #firstDwOfMo = #weekday
end
if ((#weekday = 7) or (#weekday = 1))
set #isWkEnd = 1
else
set #isWkEnd = 0
if #isWkEnd = 0 and (#month = 1 and #day = 1)
set #holID=1 -- new years on workday
else if #weekday= 6 and (#month = 12 and #day = 31)
set #holID=1 -- holiday on sat, change to fri
else if #weekday= 2 and (#month = 1 and #day = 2)
set #holID=1 -- holiday on sun, change to mon
else if #wkInMo = 3 and #weekday= 2 and #month = 1
set #holID = 2 -- mlk
else if #wkInMo = 3 and #weekday= 2 and #month = 2
set #holID = 3 -- President’s
else if #wkInMo = 4 and #weekday= 2 and #month = 5 and datepart(month,#dt+7) = 6
set #holID = 4 -- memorial on 4th mon, no 5th
else if #wkInMo = 5 and #weekday= 2 and #month = 5
set #holID = 4 -- memorial on 5th mon
else if #isWkEnd = 0 and (#month = 7 and #day = 4)
set #holID=5 -- July 4 on workday
else if #weekday= 6 and (#month = 7 and #day = 3)
set #holID=5 -- holiday on sat, change to fri
else if #weekday= 2 and (#month = 7 and #day = 5)
set #holID=5 -- holiday on sun, change to mon
else if #wkInMo = 1 and #weekday= 2 and #month = 9
set #holID = 6 -- Labor
else if #isWkEnd = 0 and (#month = 11 and #day = 11)
set #holID=7 -- Vets day on workday
else if #weekday= 6 and (#month = 11 and #day = 10)
set #holID=7 -- holiday on sat, change to fri
else if #weekday= 2 and (#month = 11 and #day = 12)
set #holID=7 -- holiday on sun, change to mon
else if #wkInMo = 4 and #weekday= 5 and #month = 11
set #holID = 8 -- thx
else if #holID = 8
set #holID = 9 -- dy after thx
else if #isWkEnd = 0 and (#month = 12 and #day = 25)
set #holID=10 -- xmas day on workday
else if #weekday= 6 and (#month = 12 and #day = 24)
set #holID=10 -- holiday on sat, change to fri
else if #weekday= 2 and (#month = 12 and #day = 26)
set #holID=10 -- holiday on sun, change to mon
else
set #holID = null
insert into tblDay select #dt,#weekday,#wkInMo,#isWkEnd,#holID,#workDayCount
if #isWkEnd=0 and #holID is null
set #workDayCount = #workDayCount + 1
set #dt = #dt + 1
if datepart( weekday, #Dt ) = #firstDwOfMo
set #wkInMo = #wkInMo + 1
end
END
I also have a holiday table, but everyone's holidays are different:
holidayID holiday rule description
1 New Year's Day Jan. 1
2 Martin Luther King Day third Mon. in Jan.
3 Presidents' Day third Mon. in Feb.
4 Memorial Day last Mon. in May
5 Independence Day 4-Jul
6 Labor Day first Mon. in Sept
7 Veterans' Day Nov. 11
8 Thanksgiving fourth Thurs. in Nov.
9 Fri after Thanksgiving Friday after Thanksgiving
10 Christmas Day Dec. 25
HTH
This is the best I could do, still uses a loop but uses date functions instead of incrementing a minutes variable. Hope you like it.
--set up our source data
declare #business_hours table
(
work_day varchar(10),
open_time varchar(8),
close_time varchar(8)
)
insert into #business_hours values ('Monday', '08:30:00', '17:00:00')
insert into #business_hours values ('Tuesday', '08:30:00', '17:00:00')
insert into #business_hours values ('Wednesday', '08:30:00', '17:00:00')
insert into #business_hours values ('Thursday', '08:30:00', '17:00:00')
insert into #business_hours values ('Friday', '08:30:00', '18:00:00')
insert into #business_hours values ('Saturday', '09:00:00', '14:00:00')
declare #holidays table
(
holiday varchar(10)
)
insert into #holidays values ('2015-01-01')
insert into #holidays values ('2015-01-02')
--Im going to assume the SLA of 2 standard business days (0900-1700) = 8*60*2 = 960
declare #start_date datetime = '2014-12-31 16:12:47'
declare #time_span int = 960-- time till due in minutes
declare #true bit = 'true'
declare #false bit = 'false'
declare #due_date datetime --our output
--other variables
declare #date_string varchar(10)
declare #today_closing datetime
declare #is_workday bit = #true
declare #is_holiday bit = #false
--Given our timespan is in minutes, lets also assume we dont care about seconds in start or due dates
set #start_date = DATEADD(ss,datepart(ss,#start_date)*-1,#start_date)
while (#time_span > 0)
begin
set #due_date = DATEADD(MINUTE,#time_span,#start_date)
set #date_string = FORMAT(DATEADD(dd, 0, DATEDIFF(dd, 0, #start_date)),'yyyy-MM-dd')
set #today_closing = (select convert(datetime,#date_string + ' ' + close_time) from #business_hours where work_day = DATENAME(weekday,#start_date))
if exists((select work_day from #business_hours where work_day = DATENAME(weekday,#start_date)))
set #is_workday = #true
else
set #is_workday = #false
if exists(select holiday from #holidays where holiday = #date_string)
set #is_holiday = #true
else
set #is_holiday = #false
if #is_workday = #true and #is_holiday = #false
begin
if #due_date > #today_closing
set #time_span = #time_span - datediff(MINUTE, #start_date, #today_closing)
else
set #time_span = #time_span - datediff(minute, #start_date, #due_date)
end
set #date_string = FORMAT(DATEADD(dd, 1, DATEDIFF(dd, 0, #start_date)),'yyyy-MM-dd')
set #start_date = CONVERT(datetime, #date_string + ' ' + isnull((select open_time from #business_hours where work_day = DATENAME(weekday,convert(datetime,#date_string))),''))
end
select #due_date
Sql to Calculate due date excluding holidays and considering business hour as below :- < note : - It's working correctly Business hour (8-5) Maintain holiday table
CREATE TABLE [dbo].[holiday](
[id] [int] IDENTITY(1,1) NOT NULL,
[region] [nvarchar](10) NULL,
[Hdate] [date] NULL,
)
>
declare #start datetime= getdate()
declare #slamins int =960 --- SLA time in mins
declare #Country varchar(2)='NA'
declare #start_hour int = 8 -- business start hour
declare #end_hour int = 17 -- business end hour
declare #true bit = 'true'
declare #false bit = 'false'
declare #is_workday bit = #true
declare #is_holiday bit = #false
declare #due_date datetime
declare #today_closing datetime
declare #temp int = 0
declare #holidays table (HDate DateTime) -- Table variable to hold holidayes
---- Get country holidays from table based on the country code (Feel free to remove this or modify as per your DB schema)
Insert Into #Holidays (HDate) Select date from HOLIDAY Where region=#Country and Hdate>=DateAdd(dd, DateDiff(dd,0,#start), 0)
--check for weekends
set #start = case(datepart(dw,#start)+##datefirst-1)%7
when 0 then Convert(dateTime,CONVERT(varchar,#start+1,101)+' 08:00:00')
when 6 then Convert(dateTime,CONVERT(varchar,#start+2,101)+' 08:00:00')
else #start end
-- check if start time is before business hour
if datepart(hh, #start) < #start_hour set #start = Convert(dateTime,CONVERT(varchar,#start,101)+' 08:00:00')
-- check if start time is after business hour
if datepart(hh, #start) >= #end_hour set #start = Convert(dateTime,CONVERT(varchar,#start+1,101)+' 08:00:00')
-- loop start
while (#slamins > 0)
begin
-- prepared closing date time based on start date
set #today_closing = Convert(dateTime,CONVERT(varchar,#start,101)+' 17:00:00')
set #due_date = #start
-- calculate number of Minute between start date and closing date
set #temp = DATEDIFF(N, #start , #today_closing);
--check for weekends
if (DATEPART(dw, #start)!=1 AND DATEPART(dw, #start)!=7)
set #is_workday = #true
else
set #is_workday = #false
--check for holidays
if (Select Count(*) From #Holidays Where HDATE=DateAdd(dd, DateDiff(dd,0,#start), 0)) = 0
set #is_holiday =#false
else
set #is_holiday = #true
if #is_workday = #true and #is_holiday = #false
begin
if(#temp < #slamins)
begin
set #slamins = #slamins - #temp
end
else
begin
set #due_date = DATEADD(MINUTE,#slamins,#start)
set #slamins = 0
print #due_date
end
end
set #start = Convert(dateTime,CONVERT(varchar,#start+1,101)+' 08:00:00')
end
select #due_date
Here is an option using a WorkSchedule table, which will contain the business hours that are available to count towards the SLA. To account for weekends and holidays, just do not insert records for these days into the WorkSchedule table.
This solution also uses a "Tally" table aka numbers table in the due date calc. I also included debug output to help you see what is going on, so just comment out or uncomment any debug sections to see less/more info.
I used SQL temp tables in this example so that you can run it without messing up your current database schema, but you should replace with physical tables if you use this solution.
Test Data setups:
CREATE TABLE #WorkSchedule(WorkStart datetime not null primary key, WorkEnd datetime not null);
GO
CREATE TABLE #Tally (N int not null primary key);
GO
--POPULATE TEST DATA
--populate Tally table
insert into #Tally (N)
select top 10000 N = row_number() over(order by o.object_id)
from sys.objects o cross apply sys.objects o2
;
go
--POPULATE WITH DUMMY TEST DATA
INSERT INTO #WorkSchedule(WorkStart, WorkEnd)
SELECT
workStart = dateadd(hour, 8, t.workDate)
, workEnd = dateadd(hour, 17, t.workDate)
FROM (
SELECT top 10000 workDate = dateadd(day, row_number() over(order by o.object_id), '2000-01-01')
FROM sys.objects o cross apply sys.objects o2
) t
--Exclude weekends from work schedule
WHERE datename(weekday, t.workDate) not in ('Saturday','Sunday')
;
GO
Code to calculate Due Date:
SET NOCOUNT ON;
DECLARE #startDate datetime;
DECLARE #SLA_timespan_mins int;
DECLARE #workStartDayOne datetime;
DECLARE #SLA_Adjusted int;
DECLARE #dueDate datetime;
--SET PARAM VALUES HERE FOR TESTING TO ANY DATE/SLA TIMESPAN YOU WANT:
SET #startDate = '2014-01-04 05:00'; --Saturday
SET #SLA_timespan_mins = 10 * 60 ; --10 hrs.
--get the info day 1, since your start date might be after the work start time.
select top 1 #workStartDayOne = s.WorkStart
--increase the SLA timespan mins to account for difference between work start and start time
, #SLA_Adjusted = case when #startDate > s.WorkStart then datediff(minute, s.WorkStart, #startDate) else 0 end + #SLA_timespan_mins
from #WorkSchedule s
where s.WorkEnd > #startDate
and s.WorkStart <> s.WorkEnd
order by s.WorkStart asc
;
--DEBUG info:
select 'Debug Info' as DebugInfo, #startDate AS StartDate, #workStartDayOne as workStartDayOne, #SLA_timespan_mins as SLA_timespan_mins, #SLA_Adjusted as SLA_Adjusted;
--now sum all the non work hours during that period and determine the additional mins that need added.
;with cteWorkMins as
(
SELECT TOP (#SLA_Adjusted)
s.WorkStart, s.WorkEnd
, WorkMinute = dateadd(minute, t.N, cast(s.WorkStart as datetime))
, t.N as MinuteOfWorkDay
, RowNum = row_number() over(order by s.WorkStart, t.N)
FROM #WorkSchedule s
INNER JOIN #Tally t
ON t.N between 1 and datediff(minute, s.WorkStart, s.WorkEnd)
WHERE s.WorkStart >= #workStartDayOne
ORDER BY s.WorkStart, t.N
)
/**/
SELECT #dueDate = m.WorkMinute
FROM cteWorkMins m
WHERE m.RowNum = #SLA_Adjusted
--*/
/**
--DEBUG: this query will show every minute that is accounted for during the Due Date calculation.
SELECT m.*
FROM cteWorkMins m
--WHERE m.RowNum = #SLA_Adjusted
ORDER BY m.WorkMinute
--*/
;
select #dueDate as DueDate;
GO
Test Cleanup:
IF object_id('TEMPDB..#WorkSchedule') IS NOT NULL
DROP TABLE #WorkSchedule;
GO
IF object_id('TEMPDB..#Tally') IS NOT NULL
DROP TABLE #Tally;
GO
as I understood from your question, what you need is as follow
You have given start date and number of minutes added to it, then you need to get the due date
To get the due date, you need to exclude the holidays and the due date should be during business day
here is what you can do
declare #start datetime,
#min int,
#days int
set #start= '28 Dec 2014'
set #min = 2200
-- get the number of days
set #days=datediff(day,#start,dateadd(minute,#min,#start))
-- get the due date
select max(Date)
from
(select row_number() over( order by t.Id)-1 as Id,t.Date
from DateMetadata t
inner join BusinessDays b on Day(t.Date) = b.Day
where t.Date > = #start and not exists(select 1 from Holidays h
where h.Day=Day(t.Date)
and h.Month=Month(t.Date))) as p
where p.Id < #days
Note :that DateMetadata table you will setup it in your database once
the setup for the above code :
create table Holidays(Id int identity(1,1),
Name nvarchar(50),
Day int,
Month int)
create table BusinessDays(Id int identity(1,1),
Name nvarchar(20),
Day int)
-- i am putting some days that are known,
-- it depends on you to define which holidays you want
insert into Holidays (Name,Day,Month) values('Christmas',25,12)
insert into Holidays(Name,Day,Month) values('New Year',31,12)
insert into Holidays(Name,Day,Month) values('Valentine',14,2)
insert into Holidays(Name,Day,Month) values('Mothers day',21,3)
insert into Holidays(Name,Day,Month) values('April fools day',1,4)
-- i am assuming that the business days are from monday till friday and
-- saturday and sunday are off days
insert into BusinessDays(Name,Day) values ('Monday',1)
insert into BusinessDays(Name,Day) values('Tuesday',2)
insert into BusinessDays(Name,Day) values('Wednesday',3)
insert into BusinessDays(Name,Day) values('Thursday',4)
insert into BusinessDays(Name,Day) values('Friday',5)
this table is needed and you will setup it once
-- set up a table that contains all dates from now till 2050 for example
-- and you can change the value of 2050 depending on your needs
-- this table you will setup it once
create table DateMetadata(Id int identity(1,1),
Date datetime)
declare #date datetime
set #date='01 Jan 2014'
while #date < '31 Dec 2050'
begin
insert into DateMetadata(Date) values(#date)
set #date = #date + 1
end
here a working DEMO
if you need any explanation, i am ready
hope it will help you
I created a function to calculate due date from the table, once it's populated as per Beth's and others' approaches (various similar methods for doing this, as you can see -- it only took me about an hour to think about all the UK holidays and populate the table including Easter dates up to 2029 without using these exact guides).
Note that my table contains SLA in business hours (8 hours in a normal day, 5 days in a normal week), your business hours may vary but you can amend this easily, just make sure your business hours are set the same for both the SLA table and the function below.
Code below is T-SQL (written in SSMS v17.8.1)
CREATE FUNCTION [JIRA].[Fn_JIRA_Due_Date] (
#CreatedDate DATETIME, #SLA_Business_Hours INTEGER
) RETURNS DATETIME
AS
-- SELECT [JIRA].[Fn_JIRA_Due_Date]('2019-12-28 08:00:00', 24)
/*
baldmosherâ„¢
2019-03-25
* Function returns the DueDate for a JIRA ticket, based on the CreatedDate and the SLA (based on the Issue Type, or the Epic for Tasks) and business hours per date (set in [JIRA].[Ref_JIRA_Business_Hours])
* Called by IUP to store this at the time the ticket is loaded
* Can only consider SLA in Business Hours:
* <24hrs calendar = <8hrs business
* =24hrs calendar = 8hrs business
* >24hrs calendar = 8hrs business * business days
*/
BEGIN
IF #CreatedDate IS NULL OR #SLA_Business_Hours IS NULL RETURN NULL;
DECLARE #SLA_Hours_Remaining SMALLINT = #SLA_Business_Hours;
--SET DATEFIRST 1;
DECLARE #DueDate DATETIME;
DECLARE #BusHrsStart DECIMAL(18,10) = 8 ; -- start of Business Hours (8am)
DECLARE #BusHrsClose DECIMAL(18,10) = 16 ; -- close of Business Hours (4pm)
--DECLARE #WkndStart DECIMAL(18,10) = 6 ; -- start of weekend (Sat)
DECLARE #Hours_Today SMALLINT ; -- # hours left in day to process ticket
-- PRINT 'Created ' + CAST(CAST(#CreatedDate AS DATE) AS VARCHAR(10)) + ' ' + CAST(CAST(#CreatedDate AS TIME) AS VARCHAR(8))
--!!!! extend to the next whole hour just to simplify reporting -- need to work on fixing this eventually
SET #CreatedDate = DATEADD(MINUTE,60-DATEPART(MINUTE,#CreatedDate),#CreatedDate)
-- PRINT 'Rounded ' + CAST(CAST(#CreatedDate AS DATE) AS VARCHAR(10)) + ' ' + CAST(CAST(#CreatedDate AS TIME) AS VARCHAR(8))
--check if created outside business hours and adjust CreatedDate to start the clock first thing at the next business hours start of day (days are checked next)
IF DATEPART(HOUR,#CreatedDate) < #BusHrsStart
--created before normal hours, adjust #CreatedDate later to #BusHrsStart same day
BEGIN
SET #CreatedDate = DATEADD(HOUR,#BusHrsStart,CAST(CAST(#CreatedDate AS DATE) AS DATETIME))
END
IF DATEPART(HOUR,#CreatedDate) >= #BusHrsClose
--created after normal hours, adjust #CreatedDate to #BusHrsStart next day
BEGIN
SET #CreatedDate = DATEADD(HOUR,#BusHrsStart,CAST(CAST(#CreatedDate+1 AS DATE) AS DATETIME))
--adjust CreatedDate to start the clock the next day with >0 business hours (i.e. extend if it falls on a weekend or holiday)
SET #CreatedDate = CAST(#CreatedDate AS DATE)
StartNextWorkingDay:
IF (SELECT TOP(1) [Business_Hours] FROM [JIRA].[Ref_JIRA_Business_Hours] b WHERE b.[Date] = #CreatedDate ORDER BY [Date]) = 0
BEGIN
SET #CreatedDate = DATEADD(DAY,1,#CreatedDate)
GOTO StartNextWorkingDay
END
--DATEADD(DAY, DATEDIFF(DAY,0,#CreatedDate+7)/7*7,0); -- midnight, Monday next week
SET #CreatedDate = DATEADD(HOUR,#BusHrsStart,#CreatedDate); -- BusHrsStart
END
-- PRINT 'Started ' + CAST(CAST(#CreatedDate AS DATE) AS VARCHAR(10)) + ' ' + CAST(CAST(#CreatedDate AS TIME) AS VARCHAR(8))
--third, check the business hours for each date from CreatedDate onwards to determine the relevant DueDate
SET #DueDate = #CreatedDate
-- PRINT 'SLA Hrs ' + CAST(#SLA_Hours_Remaining AS VARCHAR(2))
SET #Hours_Today = #BusHrsStart + (SELECT TOP(1) [Business_Hours] FROM [JIRA].[Ref_JIRA_Business_Hours] b WHERE b.[Date] = CAST(#DueDate AS DATE) ORDER BY [Date]) - DATEPART(HOUR, #CreatedDate)
-- PRINT 'Hrs Today ' + CAST(#Hours_Today AS VARCHAR(2))
DueNextWorkingDay:
IF #SLA_Hours_Remaining > #Hours_Today
BEGIN
-- PRINT 'Due another day'
SET #SLA_Hours_Remaining = #SLA_Hours_Remaining - #Hours_Today --adjust remaining time after today's hours
SET #Hours_Today = (SELECT TOP(1) [Business_Hours] FROM [JIRA].[Ref_JIRA_Business_Hours] b WHERE b.[Date] = CAST(#DueDate AS DATE) ORDER BY [Date])
-- PRINT 'SLA Hrs ' + CAST(#SLA_Hours_Remaining AS VARCHAR(2))
-- PRINT 'Hrs Today ' + CAST(#Hours_Today AS VARCHAR(2))
SET #DueDate = DATEADD(DAY,1,DATEADD(HOUR,#BusHrsStart,CAST(CAST(#DueDate AS DATE) AS DATETIME))) --adjust DueDate to first thing next day
END
IF #SLA_Hours_Remaining <= #Hours_Today
BEGIN
-- PRINT 'Due today'
SET #DueDate = DATEADD(HOUR,#SLA_Hours_Remaining,#DueDate)
END
ELSE
BEGIN
GOTO DueNextWorkingDay
END
-- PRINT 'DueDate ' + CAST(CAST(#DueDate AS DATE) AS VARCHAR(10)) + ' ' + CAST(CAST(#DueDate AS TIME) AS VARCHAR(8))
RETURN #DueDate
END
GO
Table for SLAs:
CREATE TABLE [JIRA].[Ref_JIRA_SLAs](
[SLA_SK] [SMALLINT] IDENTITY(1,1) NOT NULL,
[Project] [VARCHAR](20) NULL,
[Issue_Type] [VARCHAR](50) NULL,
[Epic_Name] [VARCHAR](50) NULL,
[SLA_Business_Hours] [SMALLINT] NULL,
[Comments] [VARCHAR](8000) NULL
) ON [PRIMARY] WITH (DATA_COMPRESSION = PAGE)
GO
I have the following stored procedure:
CREATE PROCEDURE [dbo].[vRpt_VolunteerPaymentsAll]
#startdate DATETIME = NULL ,
#enddate DATETIME = NULL ,
#user NVARCHAR(50)
AS /* This procedure generates Team Events that have been audtied */
DECLARE #sd DATETIME
DECLARE #ed DATETIME
/* Ensure that the start and end dates covert whole days */
SET #sd = CONVERT(VARCHAR(10), #startdate, 120) + ' 00:00:00'
SET #ed = CONVERT(VARCHAR(10), #enddate, 120) + ' 23:59:59'
DECLARE #id INT
INSERT INTO vVolunteerPaymentEvents
( StartDate ,
EndDate ,
Verifier ,
DatePaid ,
RecordsPaid ,
UnDone ,
Comments ,
Flags
)
VALUES ( #startdate ,
#enddate ,
/*Get the users initials*/
( SELECT dbo.vUsers.Initials
FROM dbo.vUsers
WHERE dbo.vUsers.UserID = #user
) ,
GETDATE() ,
/* Count how many records are going ot be affected*/
( SELECT COUNT(*)
FROM dbo.vVolunteerPayments
WHERE dbo.vVolunteerPayments.PaymentEventID = 0
AND ( dbo.vVolunteerPayments.DateCreated BETWEEN #sd
AND
#ed )
) ,
0 ,
'' ,
0
)
/*Set the id of the payment event id for the volunteer payments*/
SET #id = SCOPE_IDENTITY() ;
--get the totals for the payment based on the
--#id value just inserted above
UPDATE dbo.vVolunteerPayments
SET dbo.vVolunteerPayments.PaymentEventID = #id ,
dbo.vVolunteerPayments.DatePaid = GETDATE()
WHERE dbo.vVolunteerPayments.PaymentEventID = 0
AND dbo.vVolunteerPayments.DateCreated BETWEEN #sd
AND #ed
SELECT * FROM
(SELECT VOLSACCT.volunteerid ,
ISNULL(VOLS.Forename, '') + ' ' + ISNULL(VOLS.Surname, '') AS Name ,
VOLSACCT.SortCode ,
VOLSACCT.AccountName ,
VOLSACCT.AccountNumber ,
SUM(CASE [Type]
WHEN 1001
THEN CASE WHEN PMTS.DateCreated BETWEEN #sd AND #ed
--AND PMTS.PaymentEventID = 0
--AND PMTS.VolunteerId = #volunteerid
THEN Amount
END
ELSE 0
END) AS Reimbursements ,
SUM(CASE [Type]
WHEN 1002
THEN CASE WHEN PMTS.DateCreated BETWEEN #sd AND #ed
--AND PMTS.PaymentEventID = 0
--AND PMTS.VolunteerId = #volunteerid
THEN Amount
END
ELSE 0
END) AS MobilePhoneCharges ,
SUM(CASE [Type]
WHEN 1003
THEN CASE WHEN PMTS.DateCreated BETWEEN #sd AND #ed
--AND PMTS.PaymentEventID = 0
--AND PMTS.VolunteerId = #volunteerid
THEN Amount
END
ELSE 0
END) AS GPContributions ,
SUM(CASE [Type]
WHEN 12
THEN CASE WHEN PMTS.DateCreated BETWEEN #sd AND #ed
--AND PMTS.PaymentEventID = 0
--AND PMTS.VolunteerId = #volunteerid
THEN Amount
END
ELSE 0
END) AS GPExpenses ,
SUM(CASE [Type]
WHEN 137
THEN CASE WHEN PMTS.DateCreated BETWEEN #sd AND #ed
--PaymentEventID = 0
--AND PMTS.VolunteerId = #volunteerid
THEN Amount
END
ELSE 0
END) AS Expenses ,
SUM(CASE WHEN PMTS.DateCreated BETWEEN #sd AND #ed
--AND PMTS.PaymentEventID = 0
--AND PMTS.VolunteerId = #volunteerid
THEN Mileage
ELSE 0
END) AS TotalMileageWeek ,
VOLSACCT.BACS,
PMTS.ChargeRate
FROM dbo.vVolunteerPayments PMTS
INNER JOIN dbo.vVolunteerAccounts VOLSACCT ON PMTS.VolunteerId = VOLSACCT.VolunteerID
INNER JOIN dbo.vVolunteers VOLS ON PMTS.VolunteerId = VOLS.VolunteerID
WHERE PMTS.PaymentEventID = #id
GROUP BY VOLSACCT.volunteerid ,
VOLSACCT.AccountName ,
VOLSACCT.AccountNumber ,
VOLSACCT.BACS ,
VOLSACCT.SortCode ,
VOLS.Forename ,
VOLS.Surname,
PMTS.ChargeRate) AS A
WHERE
GPContributions >0
OR GPExpenses > 0
OR MobilePhoneCharges > 0
OR Expenses > 0
OR Reimbursements > 0
OR Expenses > 0
OR TotalMileageWeek >0
ORDER BY Name
It basically inserts a summary record of affected transactions into one table (volunteerpaymentevent) , updates existing records of another table (volunteerpayments(datepaid and payment event id)) and then returns record sets of sumary values within a join
However I have found that if the join fails or there are no joins at all (and consequently nothing outputs) then the update part of the procedure still updates the records
Is there a way of checking the result of the inner join before updating the records in the volunteerpayments table
Cheers
You need to put your code inside a transaction:
ALTER PROCEDURE [dbo].[vRpt_VolunteerPaymentsAll]
#startdate DATETIME = NULL ,
#enddate DATETIME = NULL ,
#user NVARCHAR(50)
AS
begin transaction
your procedure code
commit transaction
See MSDN for more on transactions.
The following is my stored procedure for setting workingday between two dates
Create procedure [dbo].[sp_workingdays](#startdate date,#enddate date,#createddatetime datetime,#adminid int)
as
declare #start date,#end date
declare #day varchar(50)
declare #timeid int
declare #daypare int
declare #workingdaytype varchar(20)
begin
set #start=#startdate
set #end=#enddate
while (#start<=#end)
begin
if #start not in (select Date from Generalholyday_details)
begin
select #day= DATENAME(dw,#start)
select #workingdaytype =case (DATEPART(DW,#start)+##DATEFIRST)%7 when 1 then 'Leave Day' when 2 then 'Full Day' when 3 then 'Full Day' when 4 then 'Full Day'when 5 then 'Full Day' when 6 then 'Full Day' when 0 then 'Half Day' end
select #timeid=Time_id from Workingdaytimesetting_details where Workingday_type=#workingdaytype
insert into Workingday_details(Working_date,working_day,Time_id) values(#start,#day,#timeid)
update Workingday_details set createddatetime=#createddatetime where createddatetime is null
update Workingday_details set adminid=#adminid where adminid is null
end
set #start=DATEADD(day,1,#start)
end
end
GO
In datepart line 1 is for sunday. but actually when i run the stored procedure, i got 1 for Saturday. how can i set 1 for sunday.In my previous system i got 1 for sunday in same procedure.
Have a look at SET DATEFIRST (Transact-SQL)
Sets the first day of the week to a number from 1 through 7.
To see the current setting of SET DATEFIRST, use the ##DATEFIRST
function.
The setting of SET DATEFIRST is set at execute or run time and not at
parse time.
Specifying SET DATEFIRST has no effect on DATEDIFF. DATEDIFF always
uses Sunday as the first day of the week to ensure the function is
deterministic.
Try this one -
SET DATEFIRST 7
DATEFIRST - MSDN
Also try this query after small refactor:
CREATE PROCEDURE [dbo].[sp_workingdays]
(
#startdate DATE
, #enddate DATE
, #createddatetime DATETIME
, #adminid INT
)
AS BEGIN
DECLARE
#start DATE
, #end DATE
, #day VARCHAR(50)
, #timeid INT
, #workingdaytype VARCHAR(20)
SELECT
#start = #startdate
, #end = #enddate
WHILE (#start <= #end) BEGIN
IF NOT EXISTS(
SELECT 1
FROM Generalholyday_details
WHERE #start = [Date]
) BEGIN
SELECT
#day = DATENAME(dw, #start)
, #workingdaytype =
CASE WHEN dt = 1 THEN 'Leave Day'
WHEN dt IN (2,3,4,5,6) THEN 'Full Day'
ELSE 'Half Day'
END
FROM (
SELECT dt = (DATEPART(DW, #start) + ##DATEFIRST) % 7
) t
SELECT #timeid = Time_id
FROM Workingdaytimesetting_details
WHERE Workingday_type = #workingdaytype
INSERT INTO Workingday_details (Working_date, working_day, Time_id)
VALUES (#start, #day, #timeid)
UPDATE Workingday_details
SET createddatetime = #createddatetime
WHERE createddatetime IS NULL
UPDATE Workingday_details
SET adminid = #adminid
WHERE adminid IS NULL
END
SET #start = DATEADD(DAY, 1, #start)
END
END
GO
This is the scenario I would like to have in my INSERT in a stored procedure.
Tables:
tblRate
RateID (pk)
Rate money
Days int
isDailyRate bit
tblBooking
Totals money
In my vb app this is the statement. How would I translate this into T-SQL?
if !isDaily = True then
!Totals = (!Days * !Rate)
else
!Totals = !Rate
end if
This is my stored procedure:
Create PROCEDURE [dbo].[sp_tblBooking_Add]
(
#RateID bigint,
#Rate money,
#Days int,
#CheckOUT datetime
)
AS
BEGIN
--Below is the logic I want. I can't get the right syntax
--Declare #myTotals as money
--Declare #myCheckOut as DateTime
--if (Select isDailyRate FROM tblRates WHERE (RateID = #RateID)) = True THEN
-- set myTotals = (#Rate * #Days)
-- set #CheckOUT = DATEADD(DAY, DATEDIFF(DAY, 0, GETDATE()) + #Days, '12:00')
--Else
-- set myTotals = #Rate
-- set #CheckOUT = GETDATE()
--End if
INSERT INTO tblBooking(Totals, CheckOUT)
VALUES(#myTotals, #myCheckOut);
END
Use the CASE expression:
INSERT INTO tblBooking (Totals, CheckOUT)
SELECT
CASE
WHEN idDailyRate = 1 THEN #Rate * #Days
ELSE #rate
END,
CASE
WHEN idDailyRate = 1 THEN DATEADD(DAY,
DATEDIFF(DAY, 0, GETDATE()) + #Days,
'12:00')
ELSE GETDATE()
END
FROM tblRates
WHERE RateID = #RateID;
Or, if they are scalar values, then you can select them into a variables and insert them instead of INSERT ... INTO ... SELECT.
Update 1
Like this:
Declare #myTotals as money;
Declare #myCheckOut as DateTime;
SELECT
#myTotals = CASE
WHEN idDailyRate = 1 THEN #Rate * #Days
ELSE #rate
END,
#myCheckOut = CASE
WHEN idDailyRate = 1 THEN DATEADD(DAY,
DATEDIFF(DAY, 0, GETDATE()) + #Days,
'12:00')
ELSE GETDATE()
END
FROM tblRates
WHERE RateID = #RateID;
INSERT INTO tblBooking (Totals, CheckOUT) VALUES(#myTotals, #myCheckOut );
But this will give you an error, if there is more than value returned from this table tblRates into those variables.
I want to calculate the number of working days between 2 given dates. For example if I want to calculate the working days between 2013-01-10 and 2013-01-15, the result must be 3 working days (I don't take into consideration the last day in that interval and I subtract the Saturdays and Sundays). I have the following code that works for most of the cases, except the one in my example.
SELECT (DATEDIFF(day, '2013-01-10', '2013-01-15'))
- (CASE WHEN DATENAME(weekday, '2013-01-10') = 'Sunday' THEN 1 ELSE 0 END)
- (CASE WHEN DATENAME(weekday, DATEADD(day, -1, '2013-01-15')) = 'Saturday' THEN 1 ELSE 0 END)
How can I accomplish this? Do I have to go through all the days and check them? Or is there an easy way to do this.
Please, please, please use a calendar table. SQL Server doesn't know anything about national holidays, company events, natural disasters, etc. A calendar table is fairly easy to build, takes an extremely small amount of space, and will be in memory if it is referenced enough.
Here is an example that creates a calendar table with 30 years of dates (2000 -> 2029) but requires only 200 KB on disk (136 KB if you use page compression). That is almost guaranteed to be less than the memory grant required to process some CTE or other set at runtime.
CREATE TABLE dbo.Calendar
(
dt DATE PRIMARY KEY, -- use SMALLDATETIME if < SQL Server 2008
IsWorkDay BIT
);
DECLARE #s DATE, #e DATE;
SELECT #s = '2000-01-01' , #e = '2029-12-31';
INSERT dbo.Calendar(dt, IsWorkDay)
SELECT DATEADD(DAY, n-1, '2000-01-01'), 1
FROM
(
SELECT TOP (DATEDIFF(DAY, #s, #e)+1) ROW_NUMBER()
OVER (ORDER BY s1.[object_id])
FROM sys.all_objects AS s1
CROSS JOIN sys.all_objects AS s2
) AS x(n);
SET DATEFIRST 1;
-- weekends
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE DATEPART(WEEKDAY, dt) IN (6,7);
-- Christmas
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE MONTH(dt) = 12
AND DAY(dt) = 25
AND IsWorkDay = 1;
-- continue with other holidays, known company events, etc.
Now the query you're after is quite simple to write:
SELECT COUNT(*) FROM dbo.Calendar
WHERE dt >= '20130110'
AND dt < '20130115'
AND IsWorkDay = 1;
More info on calendar tables:
http://web.archive.org/web/20070611150639/http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-calendar-table.html
More info on generating sets without loops:
http://www.sqlperformance.com/tag/date-ranges
Also beware of little things like relying on the English output of DATENAME. I've seen several applications break because some users had a different language setting, and if you're relying on WEEKDAY be sure you set your DATEFIRST setting appropriately...
For stuff like this i tend to maintain a calendar table that also includes bank holidays etc.
The script i use for this is as follows (Note that i didnt write it # i forget where i found it)
SET DATEFIRST 1
SET NOCOUNT ON
GO
--Create ISO week Function (thanks BOL)
CREATE FUNCTION ISOweek ( #DATE DATETIME )
RETURNS INT
AS
BEGIN
DECLARE #ISOweek INT
SET #ISOweek = DATEPART(wk, #DATE) + 1 - DATEPART(wk, CAST(DATEPART(yy, #DATE) AS CHAR(4)) + '0104')
--Special cases: Jan 1-3 may belong to the previous year
IF ( #ISOweek = 0 )
SET #ISOweek = dbo.ISOweek(CAST(DATEPART(yy, #DATE) - 1 AS CHAR(4)) + '12' + CAST(24 + DATEPART(DAY, #DATE) AS CHAR(2))) + 1
--Special case: Dec 29-31 may belong to the next year
IF ( ( DATEPART(mm, #DATE) = 12 )
AND ( ( DATEPART(dd, #DATE) - DATEPART(dw, #DATE) ) >= 28 )
)
SET #ISOweek = 1
RETURN(#ISOweek)
END
GO
--END ISOweek
--CREATE Easter algorithm function
--Thanks to Rockmoose (http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=45689)
CREATE FUNCTION fnDLA_GetEasterdate ( #year INT )
RETURNS CHAR(8)
AS
BEGIN
-- Easter date algorithm of Delambre
DECLARE #A INT ,
#B INT ,
#C INT ,
#D INT ,
#E INT ,
#F INT ,
#G INT ,
#H INT ,
#I INT ,
#K INT ,
#L INT ,
#M INT ,
#O INT ,
#R INT
SET #A = #YEAR % 19
SET #B = #YEAR / 100
SET #C = #YEAR % 100
SET #D = #B / 4
SET #E = #B % 4
SET #F = ( #B + 8 ) / 25
SET #G = ( #B - #F + 1 ) / 3
SET #H = ( 19 * #A + #B - #D - #G + 15 ) % 30
SET #I = #C / 4
SET #K = #C % 4
SET #L = ( 32 + 2 * #E + 2 * #I - #H - #K ) % 7
SET #M = ( #A + 11 * #H + 22 * #L ) / 451
SET #O = 22 + #H + #L - 7 * #M
IF #O > 31
BEGIN
SET #R = #O - 31 + 400 + #YEAR * 10000
END
ELSE
BEGIN
SET #R = #O + 300 + #YEAR * 10000
END
RETURN #R
END
GO
--END fnDLA_GetEasterdate
--Create the table
CREATE TABLE MyDateTable
(
FullDate DATETIME NOT NULL
CONSTRAINT PK_FullDate PRIMARY KEY CLUSTERED ,
Period INT ,
ISOWeek INT ,
WorkingDay VARCHAR(1) CONSTRAINT DF_MyDateTable_WorkDay DEFAULT 'Y'
)
GO
--End table create
--Populate table with required dates
DECLARE #DateFrom DATETIME ,
#DateTo DATETIME ,
#Period INT
SET #DateFrom = CONVERT(DATETIME, '20000101')
--yyyymmdd (1st Jan 2000) amend as required
SET #DateTo = CONVERT(DATETIME, '20991231')
--yyyymmdd (31st Dec 2099) amend as required
WHILE #DateFrom <= #DateTo
BEGIN
SET #Period = CONVERT(INT, LEFT(CONVERT(VARCHAR(10), #DateFrom, 112), 6))
INSERT MyDateTable
( FullDate ,
Period ,
ISOWeek
)
SELECT #DateFrom ,
#Period ,
dbo.ISOweek(#DateFrom)
SET #DateFrom = DATEADD(dd, +1, #DateFrom)
END
GO
--End population
/* Start of WorkingDays UPDATE */
UPDATE MyDateTable
SET WorkingDay = 'B' --B = Bank Holiday
--------------------------------EASTER---------------------------------------------
WHERE FullDate = DATEADD(dd, -2, CONVERT(DATETIME, dbo.fnDLA_GetEasterdate(DATEPART(yy, FullDate)))) --Good Friday
OR FullDate = DATEADD(dd, +1, CONVERT(DATETIME, dbo.fnDLA_GetEasterdate(DATEPART(yy, FullDate))))
--Easter Monday
GO
UPDATE MyDateTable
SET WorkingDay = 'B'
--------------------------------NEW YEAR-------------------------------------------
WHERE FullDate IN ( SELECT MIN(FullDate)
FROM MyDateTable
WHERE DATEPART(mm, FullDate) = 1
AND DATEPART(dw, FullDate) NOT IN ( 6, 7 )
GROUP BY DATEPART(yy, FullDate) )
---------------------MAY BANK HOLIDAYS(Always Monday)------------------------------
OR FullDate IN ( SELECT MIN(FullDate)
FROM MyDateTable
WHERE DATEPART(mm, FullDate) = 5
AND DATEPART(dw, FullDate) = 1
GROUP BY DATEPART(yy, FullDate) )
OR FullDate IN ( SELECT MAX(FullDate)
FROM MyDateTable
WHERE DATEPART(mm, FullDate) = 5
AND DATEPART(dw, FullDate) = 1
GROUP BY DATEPART(yy, FullDate) )
--------------------AUGUST BANK HOLIDAY(Always Monday)------------------------------
OR FullDate IN ( SELECT MAX(FullDate)
FROM MyDateTable
WHERE DATEPART(mm, FullDate) = 8
AND DATEPART(dw, FullDate) = 1
GROUP BY DATEPART(yy, FullDate) )
--------------------XMAS(Move to next working day if on Sat/Sun)--------------------
OR FullDate IN ( SELECT CASE WHEN DATEPART(dw, FullDate) IN ( 6, 7 ) THEN DATEADD(dd, +2, FullDate)
ELSE FullDate
END
FROM MyDateTable
WHERE DATEPART(mm, FullDate) = 12
AND DATEPART(dd, FullDate) IN ( 25, 26 ) )
GO
---------------------------------------WEEKENDS--------------------------------------
UPDATE MyDateTable
SET WorkingDay = 'N'
WHERE DATEPART(dw, FullDate) IN ( 6, 7 )
GO
/* End of WorkingDays UPDATE */
--SELECT * FROM MyDateTable ORDER BY 1
DROP FUNCTION fnDLA_GetEasterdate
DROP FUNCTION ISOweek
--DROP TABLE MyDateTable
SET NOCOUNT OFF
Once you have created the table, finding the number of working days is easy peasy:
SELECT COUNT(FullDate) AS WorkingDays
FROM dbo.tbl_WorkingDays
WHERE WorkingDay = 'Y'
AND FullDate >= CONVERT(DATETIME, '10/01/2013', 103)
AND FullDate < CONVERT(DATETIME, '15/01/2013', 103)
Note that this script includes UK bank holidays, i'm not sure what region you're in.
Here's a simple function that counts working days not including Saturday and Sunday (when counting holidays isn't necessary):
CREATE FUNCTION dbo.udf_GetBusinessDays (
#START_DATE DATE,
#END_DATE DATE
)
RETURNS INT
WITH EXECUTE AS CALLER
AS
BEGIN
DECLARE #NUMBER_OF_DAYS INT = 0;
DECLARE #DAY_COUNTER INT = 0;
DECLARE #BUSINESS_DAYS INT = 0;
DECLARE #CURRENT_DATE DATE;
DECLARE #DAYNAME NVARCHAR(9)
SET #NUMBER_OF_DAYS = DATEDIFF(DAY, #START_DATE, #END_DATE);
WHILE #DAY_COUNTER <= #NUMBER_OF_DAYS
BEGIN
SET #CURRENT_DATE = DATEADD(DAY, #DAY_COUNTER, #START_DATE)
SET #DAYNAME = DATENAME(WEEKDAY, #CURRENT_DATE)
SET #DAY_COUNTER += 1
IF #DAYNAME = N'Saturday' OR #DAYNAME = N'Sunday'
BEGIN
CONTINUE
END
ELSE
BEGIN
SET #BUSINESS_DAYS += 1
END
END
RETURN #BUSINESS_DAYS
END
GO
This is the method I normally use (When not using a calendar table):
DECLARE #T TABLE (Date1 DATE, Date2 DATE);
INSERT #T VALUES ('20130110', '20130115'), ('20120101', '20130101'), ('20120611', '20120701');
SELECT Date1, Date2, WorkingDays
FROM #T t
CROSS APPLY
( SELECT [WorkingDays] = COUNT(*)
FROM Master..spt_values s
WHERE s.Number BETWEEN 1 AND DATEDIFF(DAY, t.date1, t.Date2)
AND s.[Type] = 'P'
AND DATENAME(WEEKDAY, DATEADD(DAY, s.number, t.Date1)) NOT IN ('Saturday', 'Sunday')
) wd
If like I do you have a table with holidays in you can add this in too:
SELECT Date1, Date2, WorkingDays
FROM #T t
CROSS APPLY
( SELECT [WorkingDays] = COUNT(*)
FROM Master..spt_values s
WHERE s.Number BETWEEN 1 AND DATEDIFF(DAY, t.date1, t.Date2)
AND s.[Type] = 'P'
AND DATENAME(WEEKDAY, DATEADD(DAY, s.number, t.Date1)) NOT IN ('Saturday', 'Sunday')
AND NOT EXISTS
( SELECT 1
FROM HolidayTable ht
WHERE ht.Date = DATEADD(DAY, s.number, t.Date1)
)
) wd
The above will only work if your dates are within 2047 days of each other, if you are likely to be calculating larger date ranges you can use this:
SELECT Date1, Date2, WorkingDays
FROM #T t
CROSS APPLY
( SELECT [WorkingDays] = COUNT(*)
FROM ( SELECT [Number] = ROW_NUMBER() OVER(ORDER BY s.number)
FROM Master..spt_values s
CROSS JOIN Master..spt_values s2
) s
WHERE s.Number BETWEEN 1 AND DATEDIFF(DAY, t.date1, t.Date2)
AND DATENAME(WEEKDAY, DATEADD(DAY, s.number, t.Date1)) NOT IN ('Saturday', 'Sunday')
) wd
I did my code in SQL SERVER 2008 (MS SQL) . It works fine for me. I hope it will help you.
DECLARE #COUNTS int,
#STARTDATE date,
#ENDDATE date
SET #STARTDATE ='01/21/2013' /*Start date in mm/dd/yyy */
SET #ENDDATE ='01/26/2013' /*End date in mm/dd/yyy */
SET #COUNTS=0
WHILE (#STARTDATE<=#ENDDATE)
BEGIN
/*Check for holidays*/
IF ( DATENAME(weekday,#STARTDATE)<>'Saturday' and DATENAME(weekday,#STARTDATE)<>'Sunday')
BEGIN
SET #COUNTS=#COUNTS+1
END
SET #STARTDATE=DATEADD(day,1,#STARTDATE)
END
/* Display the no of working days */
SELECT #COUNTS
By Combining #Aaron Bertrand's answer and the Easter Calculation from #HeavenCore's and adding some code of my own, this code creates a calendar from 2000 to 2049 that includes UK (England) Bank Holidays. Usage and notes as per Aaron's answer:
DECLARE #s DATE, #e DATE;
SELECT #s = '2000-01-01' , #e = '2049-12-31';
-- Insert statements for procedure here
CREATE TABLE dbo.Calendar
(
dt DATE PRIMARY KEY, -- use SMALLDATETIME if < SQL Server 2008
IsWorkDay BIT
);
INSERT dbo.Calendar(dt, IsWorkDay)
SELECT DATEADD(DAY, n-1, '2000-01-01'), 1
FROM
(
SELECT TOP (DATEDIFF(DAY, #s, #e)+1) ROW_NUMBER()
OVER (ORDER BY s1.[object_id])
FROM sys.all_objects AS s1
CROSS JOIN sys.all_objects AS s2
) AS x(n);
SET DATEFIRST 1;
-- weekends
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE DATEPART(WEEKDAY, dt) IN (6,7);
-- Christmas
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE IsWorkDay = 1 and MONTH(dt) = 12 and
(DAY(dt) in (25,26) or
(DAY(dt) in (27, 28) and DATEPART(WEEKDAY, dt) IN (1,2)) );
-- New Year
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE IsWorkDay = 1 and MONTH(dt) = 1 AND
( DAY(dt) = 1 or (DAY(dt) IN (2,3) AND DATEPART(WEEKDAY, dt)=1 ));
-- Easter
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE dt = DATEADD(dd, -2, CONVERT(DATETIME, dbo.fnDLA_GetEasterdate(DATEPART(yy, dt)))) --Good Friday
OR dt = DATEADD(dd, +1, CONVERT(DATETIME, dbo.fnDLA_GetEasterdate(DATEPART(yy, dt)))) --Easter Monday
-- May Day (first Monday in May)
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE MONTH(dt) = 5 AND DATEPART(WEEKDAY, dt)=1 and DAY(DT)<8;
-- Spring Bank Holiday (last Monday in May apart from 2022 when moved to include Platinum Jubilee bank holiday)
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE
(YEAR(dt)=2022 and MONTH(dt) = 6 AND DAY(dt) IN (2,3)) OR
(YEAR(dt)<>2022 and MONTH(dt) = 5 AND DATEPART(WEEKDAY, dt)=1 and DAY(DT)>24);
-- Summer Bank Holiday (last Monday in August)
UPDATE dbo.Calendar SET IsWorkDay = 0
WHERE MONTH(dt) = 8 AND DATEPART(WEEKDAY, dt)=1 and DAY(DT)>24;