I'm really sick of amazon ability to clone a bucket. They don't offer bucket renaming and they don't offer a good way to copy bucket with dozen of thousands files in it. Is there a way that take seconds to minutes instead of hours?
You can easily clone a bucket by using sync. (First create the bucket you want to clone it to):
aws s3 sync --quiet s3://[bucket-old] s3://[bucket-new]
Tip: use the --dryrun flag to see what you're doing first (and break it off when it looks good or else you have to wait for your thousands of files to finish listing)
Related
I need to copy large files ( may be even greater than 50 GB) from one S3 bucket to other S3 bucket ( event based). I am planning to use s3.Object.copy_from to do this inside Lambda ( using boto3).
I wanted to see if anyone has tried this? will this have any performance issue for larger files (100 GB etc.) causing Lambda timeout?
If yes, is there any alternate option ? ( I am trying to use code since I might need to do some other additional logic like rename file, move source file to archive etc.).
Note- I am also exploring AWS S3 Replication options, but looking for other solutions in parallel.
You can use AWS S3 replication feature.
It supports key prefix and API filtering as well.
I need to copy 1 TB of data from yandex bucket to s3 bucket. First run for full replication and then daily running it twice (every 12 hrs) so that all the new files are also synced to the s3 bucket. I have explored solutions like rclone and flexify however I am unsure what to proceed with. What would be the most optimal and cost effective solution to this problem?
I am using s3 bucket to store my data. And I keep pushing data to this bucket every single day. I wonder whether there is feature I can compare the files different in my bucket between two date. I not, is there a way for me to build one via aws cli or sdk?
The reason I want to check this is that I have a s3 bucket and my clients keep pushing data to this bucket. I want to have a look how much data they pushed since the last time I load them. Is there a pattern in aws support this query? Or do I have to create any rules in s3 bucket to analyse it?
Listing from Amazon S3
You can activate Amazon S3 Inventory, which can provide a daily file listing the contents of an Amazon S3 bucket. You could then compare differences between two inventory files.
List it yourself and store it
Alternatively, you could list the contents of a bucket and look for objects dated since the last listing. However, if objects are deleted, you will only know this if you keep a list of objects that were previously in the bucket. It's probably easier to use S3 inventory.
Process it in real-time
Instead of thinking about files in batches, you could configure Amazon S3 Events to trigger something whenever a new file is uploaded to the Amazon S3 bucket. The event can:
Trigger a notification via Amazon Simple Notification Service (SNS), such as an email
Invoke an AWS Lambda function to run some code you provide. For example, the code could process the file and send it somewhere.
We have a ton of S3 buckets and are in the process of cleaning things up. We identified Glacier as a good way to archive their data. The plan is to store the content of those buckets and then remove them.
It would be a one-shot operation, we don't need something automated.
I know that:
a bucket name may not be available anymore if one day we want to restore it
there's an indexing overhead of about 40kb per file which makes it a not so cost-efficient solution for small files and better to use an Infrequent access storage class or to zip the content
I gave it a try and created a vault. But I couldn't run the aws glacier command. I get some SSL error which is apparently related to a Python library, wether I run it on my Mac or from some dedicated container.
Also, it seems that it's a pain to use the Glacier API directly (and to keep the right file information), and that it's simpler to use it via a dedicated bucket.
What about that? Is there something to do what I want in AWS? Or any advice to do it in a not too fastidious way? What tool would you recommend?
Whoa, so many questions!
There are two ways to use Amazon Glacier:
Create a Lifecycle Policy on an Amazon S3 bucket to archive data to Glacier. The objects will still appear to be in S3, including their security, size, metadata, etc. However, their contents are stored in Glacier. Data stored in Glacier via this method must be restored back to S3 to access the contents.
Send data directly to Amazon Glacier via the AWS API. Data sent this way must be restored via the API.
Amazon Glacier charges for storage volumes, plus per request. It is less-efficient to store many, small files in Glacier. Instead, it is recommended to create archives (eg zip files) that make fewer, larger files. This can make it harder to retrieve specific files.
If you are going to use Glacier directly, it is much easier to use a utility, such as Cloudberry Backup, however these utilities are designed to backup from a computer to Glacier. They probably won't backup S3 to Glacier.
If data is already in Amazon S3, the simplest option is to create a lifecycle policy. You can then use the S3 management console and standard S3 tools to access and restore the data.
Using a S3 archiving bucket did the job.
Here is how I proceeded:
First, I created a S3 bucket called mycompany-archive, with a lifecycle rule that turns the Storage class into Glacier 1 day after the file creation.
Then, (with the aws tool installed on my Mac) I ran the following aws command to obtain the buckets list: aws s3 ls
I then pasted the output into an editor that can do regexp relacements, and I did the following one:
Replace ^\S*\s\S*\s(.*)$ by aws s3 cp --recursive s3://$1 s3://mycompany-archive/$1 && \
It gave me a big command, from which I removed the trailing && \ at the end, and the lines corresponding the buckets I didn't want to copy (mainly mycompany-archive had to be removed from there), and I had what I needed to do the transfers.
That command could be executed directly, but I prefer to run such commands using the screen util, to make sure the process wouldn't stop if I close my session by accident.
To launch it, I ran screen, launched the command, and then pressed CTRL+A then D to detach it. I can then come back to it by running screen -r.
Finally, under MacOS, I ran cafeinate to make sure the computer wouldn't sleep before it's over. To run it, issued ps|grep aws to locate the process id of the command. And then caffeinate -w 31299 (the process id) to ensure my Mac wouldn't allow sleep before the process is done.
It did the job (well, it's still running), I have now a bucket containing a folder for each archived bucket. Next step will be to remove the undesired S3 buckets.
Of course this way of doing could be improved in many ways, mainly by turning everything into a fault-tolerant replayable script. In this case, I have to be pragmatic and thinking about how to improve it would take far more time for almost no gain.
What is the easiest way to duplicate an entire Amazon S3 bucket to a bucket in a different account?
Ideally, we'd like to duplicate the bucket nightly to a different account in Amazon's European data center for backup purposes.
One thing to consider is that you might want to have whatever is doing this running in an Amazon EC2 VM. If you have your backup running outside of Amazon's cloud then you pay for the data transfer both ways. If you run in an EC2 VM, you pay no bandwidth fees (although I'm not sure if this is true when going between the North American and European stores) - only for the wall time that the EC2 instance is running (and whatever it costs to store the EC2 VM, which should be minimal I think).
Cool, I may look into writing a script to host on Ec2. The main purpose of the backup is to guard against human error on our side -- if a user accidentally deletes a bucket or something like that.
If you're worried about deletion, you should probably look at S3's new Versioning feature.
I suspect there is no "automatic" way to do this. You'll just have to write a simple app that moves the files over. Depending on how you track the files in S3 you could move just the "changes" as well.
On a related note, I'm pretty sure Amazon does a darn good job backup up the data so I don't think you necessarily need to worry about data loss, unless your back up for archival purposes, or you want to safeguard against accidentally deleting files.
You can make an application or service that responsible to create two instances of AmazonS3Client one for the source and the other for the destination, then the source AmazonS3Client start looping in the source bucket and streaming objects in, and the destination AmazonS3Client streaming them out to the destination bucket.
Note: this doesn't work for cross-account syncing, but this works for cross-region on the same account.
For simply copying everything from one bucket to another, you can use the AWS CLI (https://aws.amazon.com/premiumsupport/knowledge-center/move-objects-s3-bucket/): aws s3 sync s3://SOURCE_BUCKET_NAME s3://NEW_BUCKET_NAME
In your case, you'll need the --source-region flag: https://docs.aws.amazon.com/cli/latest/reference/s3/sync.html
If you are moving an enormous amount of data, you can optimize how quickly it happens by finding ways to split the transfers into different groups: https://aws.amazon.com/premiumsupport/knowledge-center/s3-large-transfer-between-buckets/
There are a variety of ways to run this nightly. One is example is the AWS instance-schedule (personally unverified) https://docs.aws.amazon.com/solutions/latest/instance-scheduler/appendix-a.html