I want to run a WCF service file transfer
my problem is when sending a large file, I get this exception message ProtocolException
(413) Request Entity Too Large.
this is my configuration
I found this code on the internet, so I'm not sure that it works
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<httpRuntime executionTimeout="999999" maxRequestLength="2097151" />
</system.web>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
<services>
<service name="BasicHttpBinding_ITransferService">
<endpoint
binding="basicHttpBinding" contract="ITransferService"
bindingConfiguration="BasicHttpBinding_ITransferService" />
</service>
</services>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_ITransferService" closeTimeout="04:01:00"
openTimeout="04:01:00" receiveTimeout="04:10:00" sendTimeout="04:01:00"
allowCookies="false" bypassProxyOnLocal="false"
hostNameComparisonMode="StrongWildcard"
maxBufferSize="2147483647" maxBufferPoolSize="2147483647"
maxReceivedMessageSize="2147483647"
messageEncoding="Mtom" textEncoding="utf-8"
transferMode="Streamed"
useDefaultWebProxy="true">
<readerQuotas maxDepth="128"
maxStringContentLength="2147483647" maxArrayLength="2147483647"
maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
</binding>
</basicHttpBinding>
</bindings>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<directoryBrowse enabled="true"/>
</system.webServer>
</configuration>
I'd try to send a file part by part.
Your API could be sth like this:
byte[] GetFile (string FileID, int startByte, int bytes, ...)
That way you can easily resume transfer after error, you don't need to worry about timeouts, etc.
Related
After 3 days of never ending search I am posting this. Please help. The following is the config file I have. There is only one endpoint specified , but its saying there is a conflict in the endpoints. Please help me rectifying this conflict.
System.InvalidOperationException: A binding instance has already been
associated to listen URI
'http://dd.myserver.net/MyWebService/MyService'. If two endpoints want
to share the same ListenUri, they must also share the same binding
object instance. The two conflicting endpoints were either specified
in AddServiceEndpoint() calls, in a config file, or a combination of
AddServiceEndpoint() and config.
<?xml version="1.0"?>
<configuration>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true"/>
<add key="wcf:webservicehost:enableautomaticendpointscompatability" value="true"/>
</appSettings>
<system.web>
<compilation debug="true" strict="false" explicit="true" targetFramework="4.5"/>
<httpRuntime targetFramework="4.5"/>
<authentication mode="None"/>
<customErrors mode="Off"/>
</system.web>
<system.serviceModel>
<services>
<service behaviorConfiguration="ServiceBehavior" name="MyRESTService.MyService">
<endpoint address="" behaviorConfiguration="web" binding="webHttpBinding" contract="MyRESTService.IMyService" />
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior">
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="web">
<webHttp />
</behavior>
</endpointBehaviors>
</behaviors>
<bindings>
<webHttpBinding>
<binding maxReceivedMessageSize="2147483647" maxBufferPoolSize="2147483647" maxBufferSize="2147483647">
<readerQuotas maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647"/>
<security mode="None">
</security>
</binding>
</webHttpBinding>
</bindings>
<protocolMapping>
<add binding="webHttpBinding" scheme="http"/>
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true"/>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<directoryBrowse enabled="false"/>
</system.webServer>
</configuration>
Finally I resolved the error given by one guy [https://stackoverflow.com/questions/12643113/wcf-conflicting-endpoints-after-net-4-5-installation/39394010]
I have just removed the security tag inside
before
<webHttpBinding>
<binding maxReceivedMessageSize="2147483647" maxBufferPoolSize="2147483647" maxBufferSize="2147483647">
<readerQuotas maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647"/>
<security mode="None">
</security>
</binding>
</webHttpBinding>
After
<webHttpBinding>
<binding maxReceivedMessageSize="2147483647" maxBufferPoolSize="2147483647" maxBufferSize="2147483647">
<readerQuotas maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647"/>
</binding>
</webHttpBinding>
This little thing took me 3 days of search. thanks to stackoverflow.
I have a windows application to send image to server using WCF service. When I run my code and upload an image, WCF returns "The remote server returned an error: (413) Request Entity Too Large."
I have tried several ways from links but not solved.
The following is my WCF Config.
<configSections>
<!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true" />
</appSettings>
<system.web>
<compilation targetFramework="4.5.2" />
<httpRuntime maxRequestLength="2147483647" />
</system.web>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="secureHttpBinding" maxBufferPoolSize="2147483647" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Text">
<readerQuotas maxDepth="2000000" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
<security mode="Transport" />
</binding>
</basicHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior>
<!-- To avoid disclosing metadata information, set the values below to false before deployment -->
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true" />
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
<system.webServer>
The following is app.config from Windows app.
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_ILicencePhoto" maxBufferPoolSize="2147483647" maxBufferSize="2147483647"
maxReceivedMessageSize="2147483647">
<readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647"
maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
<security mode="Transport" />
</binding>
<binding name="BasicHttpBinding_IUserLogging" >
<security mode="Transport" />
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="https://xxxxx/wcf/image.svc"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_ILicencePhoto"
contract="LicencePhoto.ILicencePhoto" name="BasicHttpBinding_ILicencePhoto" />
<endpoint address="https://xxxxx/wcf/user.svc" binding="basicHttpBinding"
bindingConfiguration="BasicHttpBinding_IUserLogging" contract="UserLogging.IUserLogging"
name="BasicHttpBinding_IUserLogging" />
</client>
</system.serviceModel>
I can log in with calling userWCF. The problem is when uploading user photo to WCF services. The user photo file size is only about 500KB max.
Thanks.
Nyi Nyi Aung
The main problem is that we don’t apply the configuration on the server-side. Since the server-side uses ProtocolMapping feature to enable the service works over HTTPS protocol, we should modify and apply the configuration on the BasicHttpsBinding instead of the BasicHttpBinding.
Please refer to the below configuration(Server-side).
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="secureHttpBinding" maxBufferPoolSize="2147483647" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Text">
<readerQuotas maxDepth="2000000" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
<security mode="Transport" />
</binding>
</basicHttpBinding>
<basicHttpsBinding>
<binding name="httpsBinding" maxBufferPoolSize="2147483647" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Text">
<readerQuotas maxDepth="2000000" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
<security mode="Transport" />
</binding>
</basicHttpsBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" bindingConfiguration="httpsBinding"/>
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
Feel free to let me know if the problem still exists.
In my project I recently changed my WCF service to use Https. It is configured to be a mutual ssl setup and the client and server certificates are both installed appropriately. Server side looks fine and even started fine in the browser as shown below.
However, when trying to configure the service reference from the WPF client side (service proxy that was previously added and generated). I get a 403 forbidden error code as shown below. Any idea why?
Here are my configurations.
WCF Server Side Config
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true" />
</appSettings>
<system.web>
<compilation debug="true" targetFramework="4.5.2" />
<httpRuntime targetFramework="4.5.2" />
</system.web>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceCredentials>
<serviceCertificate storeLocation="LocalMachine" x509FindType="FindByIssuerName" findValue="QuickFire Root Authority" />
</serviceCredentials>
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service name="PushNotification_SignalR_PoC.WCF.PushNotificationService">
<endpoint binding="wsHttpBinding" bindingConfiguration="MutualSslLargeMessageBinding" contract="PushNotification_SignalR_PoC.WCF.IPushNotificationService" />
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="MutualSslLargeMessageBinding" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647">
<readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
<security mode="Transport">
<transport clientCredentialType="Certificate"></transport>
</security>
</binding>
</wsHttpBinding>
</bindings>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
<directoryBrowse enabled="true" />
</system.webServer>
</configuration>
WPF Client Side Config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5.2" />
</startup>
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding name="WsHttpBinding_IPushNotificationService"
closeTimeout="00:01:00" openTimeout="00:01:00"
receiveTimeout="00:30:00" sendTimeout="00:01:00"
allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647"
messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true">
<readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647"
maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
<security mode="Transport">
<transport clientCredentialType="Certificate" />
</security>
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="https://localhost:44367/PushNotificationService.svc"
binding="wsHttpBinding" bindingConfiguration="WsHttpBinding_IPushNotificationService"
contract="ServiceProxy.IPushNotificationService" name="WsHttpBinding_IPushNotificationService" />
</client>
<behaviors>
<endpointBehaviors>
<behavior name="MutualSslBehavior">
<clientCredentials>
<clientCertificate storeLocation="CurrentUser" x509FindType="FindBySubjectName" findValue="QuickFire Test Client"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
If we want to call the service by adding service reference, we should add the MEX endpoint in the service endpoints on the server side. It could exchange metadata of the service over all platforms.
Like below,
<services>
<service name="PushNotification_SignalR_PoC.WCF.PushNotificationService">
<endpoint binding="wsHttpBinding" bindingConfiguration="MutualSslLargeMessageBinding" contract="PushNotification_SignalR_PoC.WCF.IPushNotificationService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange"></endpoint>
</service>
</services>
For details,
https://learn.microsoft.com/en-us/dotnet/framework/wcf/extending/how-to-configure-a-custom-ws-metadata-exchange-binding
Feel free to let me know if there is anything I can help with.
I have a WCF based web api running on windows server 2012 iis.
and I've recently trying to remove the http and suddenly I got System.ServiceModel.ServiceActivationException error. If I add http binding back, it works again.
How can I fix it so that I can run it on https only? Thanks for helping!
<?xml version="1.0"?>
<configuration>
<appSettings>
<add key="appveripad" value="xx"/>
</appSettings>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<httpRuntime maxRequestLength="2147483647" executionTimeout="3600" useFullyQualifiedRedirectUrl="true" />
<customErrors mode="Off" />
</system.web>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="false" httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true"/>
</behavior>
</serviceBehaviors>
</behaviors>
<standardEndpoints>
<webHttpEndpoint>
<standardEndpoint name=""
transferMode="Buffered"
maxBufferSize="2147483647"
maxReceivedMessageSize="2147483647"
defaultOutgoingResponseFormat="Json"
helpEnabled="true"
automaticFormatSelectionEnabled="true">
<readerQuotas maxDepth="64"
maxNameTableCharCount="2147483647"
maxStringContentLength="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647" />
</standardEndpoint>
</webHttpEndpoint>
</standardEndpoints>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<directoryBrowse enabled="true"/>
</system.webServer>
It turns out that the structure of web.conf for WCF has changed and been simplified a great deal.
I've fixed it myself by examine the exact windows log error in Event Viewer/Windows logs/Application.
The error message wrote
cannot be activated due to an exception during compilation. The exception message is: An endpoint reference cycle was detected in your configuration. The following reference cycle must be removed: webHttpEndpoint/, webHttpEndpoint/. (C:\inetpub\wwwroot\xxx\web.config line 111). --->
...
Process Name: w3wp
Process ID: 10396
And then I realized that I must remove now redundant endpoints that I have in the web.config file.
Below is the corrected part of the web.config that enables the https binding in the IIS. With and/or without http binding, it works. The only thing I did is I removed the endpoints and I added bindings sections.
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="false" httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true"/>
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding" maxBufferSize="2147483647"
maxReceivedMessageSize="2147483647">
<readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647"
maxArrayLength="2147483647" maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647" />
</binding>
<binding name="SecureTransport" maxBufferSize="2147483647"
maxReceivedMessageSize="2147483647">
<security mode="Transport">
<transport clientCredentialType="None"/>
</security>
<readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647"
maxArrayLength="2147483647" maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647" />
</binding>
</basicHttpBinding>
</bindings>
I read this article http://www.codeproject.com/Articles/166763/WCF-Streaming-Upload-Download-Files-Over-HTTP to upload large file via WCF.
I've created the same configuration but I've just upload file 48kb even I added attribute maxReceivedMessageSize ="2147483647". When I try to upload file over 48kb I got an error
The remote server returned an error: (413) Request Entity Too
Large.
Did I get wrong or miss something? Below is my config
Server config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<httpRuntime executionTimeout="4800" maxRequestLength="2097150"/>
</system.web>
<system.serviceModel>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
<!--BINDING-->
<bindings>
<basicHttpBinding>
<binding name="TransferService"
closeTimeout="00:10:00"
maxBufferPoolSize="2147483647"
maxBufferSize="2147483647"
maxReceivedMessageSize ="2147483647"
openTimeout="00:10:00"
receiveTimeout="00:10:00"
sendTimeout="00:10:00"
messageEncoding="Text"
transferMode="Streamed"
>
<readerQuotas
maxDepth="2147483647"
maxStringContentLength="2147483647"
maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647"
maxArrayLength="2147483647"/>
</binding>
</basicHttpBinding>
</bindings>
<!--SERVICE-->
<services>
<service name="TransferService.TransferService"
behaviorConfiguration="TransferServiceBehavior" >
<endpoint
address=""
binding="basicHttpBinding"
bindingConfiguration="TransferService"
contract="TransferService.ITransferService" >
</endpoint>
</service>
</services>
<!--BEHAVIOR-->
<behaviors>
<serviceBehaviors>
<behavior name="TransferServiceBehavior">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
<dataContractSerializer maxItemsInObjectGraph="2147483647" />
<serviceThrottling maxConcurrentCalls="500" maxConcurrentSessions="500" maxConcurrentInstances="500" />
</behavior>
<behavior name="">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="500000000"></requestLimits>
</requestFiltering>
</security>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
</configuration>
Web client config:
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_ITransferService" />
</basicHttpBinding>
</bindings>
<client>
<endpoint name="BasicHttpBinding_ITransferService"
address="http://localhost/transfer/TransferService.svc"
binding="basicHttpBinding"
bindingConfiguration="BasicHttpBinding_ITransferService"
contract="TransferService.ITransferService" />
</client>
</system.serviceModel>
Please suggest any solutions.
Thanks in advance
Now I've changed config as your suggest but it's still raise the same error 400 or 413. Below is my test project. I don't know reason why? (Environment: Window 7 Pro 64 bit, IIS7 , WCF 4.0)
https://skydrive.live.com/redir?resid=BFE92959302FBAA0!105&authkey=!ANO_URChpql9gKE
I'm spent two week to research and but it's the same error.
Please help me. Thanks in advance.
Well, the client config must also define the same binding configuration (with the larger transfer size), and specify that binding configuration in its endpoint configuration!
So change your client side config to:
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="TransferService"
closeTimeout="00:10:00"
maxBufferPoolSize="2147483647"
maxBufferSize="2147483647"
maxReceivedMessageSize ="2147483647"
openTimeout="00:10:00"
receiveTimeout="00:10:00"
sendTimeout="00:10:00"
messageEncoding="Text"
transferMode="Streamed"
>
<readerQuotas
maxDepth="2147483647"
maxStringContentLength="2147483647"
maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647"
maxArrayLength="2147483647"/>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint name="BasicHttpBinding_ITransferService"
address="http://localhost/transfer/TransferService.svc"
binding="basicHttpBinding"
bindingConfiguration="TransferService"
contract="TransferService.ITransferService" />
</client>
</system.serviceModel>
and then you should have the same settings on the client and the server, and then those settings would become useful !
I checked your project, replace your webconfig with this and update the service reference try again,
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<httpRuntime executionTimeout="4800" maxRequestLength="2097150"/>
</system.web>
<system.serviceModel>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
<!--BINDDING-->
<bindings>
<basicHttpBinding>
</basicHttpBinding>
<customBinding>
<binding name="LargeSilverlight" closeTimeout="00:21:00" openTimeout="00:20:00"
receiveTimeout="00:20:00" sendTimeout="00:50:00">
<textMessageEncoding maxReadPoolSize="2147483647" maxWritePoolSize="2147483647">
<readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647"
maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
</textMessageEncoding>
<httpTransport maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647"
maxBufferSize="2147483647" />
</binding>
</customBinding>
</bindings>
<client>
</client>
<!--SERVICE-->
<services>
<service name="TransferService.TransferService" behaviorConfiguration="SilverlightWCFLargeDataApplication" >
<endpoint address="" binding="customBinding" bindingConfiguration="LargeSilverlight" behaviorConfiguration="SilverlightWCFLargeDataApplication" contract="TransferService.ITransferService" >
</endpoint>
</service>
</services>
<!--BEHAVIOR-->
<behaviors>
<serviceBehaviors>
<behavior name="SilverlightWCFLargeDataApplication">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
<dataContractSerializer maxItemsInObjectGraph="2147483647"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="SilverlightWCFLargeDataApplication">
<dataContractSerializer maxItemsInObjectGraph="2147483647"/>
</behavior>
</endpointBehaviors>
</behaviors>
</system.serviceModel>
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="500000000"></requestLimits>
</requestFiltering>
</security>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
</configuration>
I am facing Same Problem. and I am used this code in config File then I am able to upload 25MB file
try this
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="webserviceMOSSuiteSoap"
closeTimeout="00:01:00"
maxBufferPoolSize="20000000"
maxBufferSize="20000000"
maxReceivedMessageSize="20000000"
openTimeout="00:01:00"
receiveTimeout="00:10:00"
sendTimeout="00:01:00"
messageEncoding="Text"
transferMode="Buffered"
allowCookies="false"
bypassProxyOnLocal="false"
hostNameComparisonMode="StrongWildcard"
textEncoding="utf-8"
useDefaultWebProxy="true">
<readerQuotas maxDepth="32"
maxStringContentLength="20000000"
maxArrayLength="20000000"
maxBytesPerRead="20000000"
maxNameTableCharCount="20000000"/>
<security mode="None">
<transport clientCredentialType="None"
proxyCredentialType="None"
realm=""/>
<message clientCredentialType="UserName"
algorithmSuite="Default"/>
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/WebServiceConnect/webservice.asmx"
binding="basicHttpBinding"
bindingConfiguration="webserviceMOSSuiteSoap"
contract="ServiceReference1.webserviceMOSSuiteSoap"
name="webserviceMOSSuiteSoap"/>
</client>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true"
multipleSiteBindingsEnabled="true"/>
</system.serviceModel>