I got stuck in a dead end after trying to install the gem 'thin' on the environment
RHEL 6.0
Ruby 1.9.3
Rails 3.2.8
As indicated, I added
gem 'thin'
to my Gemfile and ran
bundle install
The installation seemed to be successful, but after that, whenever I run 'gem', I get
<internal:prelude>:8:in `lock': ERROR: Failed to build gem native extension. (Gem::Ext::BuildError)
ERROR: Failed to build gem native extension.
deadlock; recursive locking
Gem files will remain installed in /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-1.0.3 for inspection.
Results logged to /usr/local/lib/ruby/gems/1.9.1/extensions/x86_64-linux/1.9.1-static/eventmachine-1.0.3/gem_make.out
While if I run again 'bundle install' I get
Unfortunately, a fatal error has occurred. Please see the Bundler troubleshooting documentation at
http://bit.ly/bundler-issues. Thanks!
<internal:prelude>:8:in `lock': ERROR: Failed to build gem native extension. (Gem::Ext::BuildError)
ERROR: Failed to build gem native extension.
deadlock; recursive locking
Gem files will remain installed in /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-1.0.3 for inspection.
Results logged to /usr/local/lib/ruby/gems/1.9.1/extensions/x86_64-linux/1.9.1-static/eventmachine-1.0.3/gem_make.out
I even tried to follow troubleshooting at https://github.com/bundler/bundler/blob/master/ISSUES.md but nothing has changed.
Looks like there's something corrupted in the eventmachine gem installation, but I can't neither uninstall or reinstall it.
Has anybody got an idea?
I would like at least to be able to revert to the (working) configuration prior to thin installation....
Related
Same Question I think : Rails-Unicorn-Install-Error-KGIO
While running bundle install, system is giving error for installing gems.
Gem files will remain installed in c:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9
.1/gems/kgio-2.8.0 for inspection.
Results logged to c:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/kgio-2.8.
0/ext/kgio/gem_make.out
An error occurred while installing kgio (2.8.0), and Bundler cannot continue.
Make sure that `gem install kgio -v '2.8.0'` succeeds before bundling.
Here I am unable to install kgio gem. I tried a lot but no success. Is there any way to come out of this.
Thanks in advance.
Removed the Unicorn gem from gem list.
gem 'unicorn'
If you are running Windows 7:
Error Installing "kgio-2.9.2" Gem on Windows
platforms :ruby do
gem 'unicorn'
end
I'm following the Michael Hartl Ruby on Rails Tutorial & there is a part where he is he he instructs you to update your Gemfile to include:
group :production do
gem 'pg', '0.12.2'
end
And then enter the below commands in your terminal:
bundle update
bundle install --without production
When you run the bundle update command it throws back the below errors.
sample_app:$ bundle update
Fetching gem metadata from https://rubygems.org/.........
Fetching gem metadata from https://rubygems.org/..
Resolving dependencies...
Using rake (10.0.3)
Using i18n (0.6.4)
etc
[omitted lines for brevity]
etc
Using railties (3.2.12)
Using coffee-rails (3.2.2)
Installing diff-lcs (1.1.3)
Using jquery-rails (2.0.2)
Installing pg (0.12.2)
Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension.
/home/ross/.rvm/rubies/ruby-1.9.3-p392/bin/ruby extconf.rb
checking for pg_config... no
No pg_config... trying anyway. If building fails, please try again with
--with-pg-config=/path/to/pg_config
checking for libpq-fe.h... no
Can't find the 'libpq-fe.h header
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of
necessary libraries and/or headers. Check the mkmf.log file for more
details. You may need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
etc
[omitted lines for brevity]
etc
Gem files will remain installed in /home/ross/.rvm/gems/ruby-1.9.3-p392/gems/pg-0.12.2 for inspection.
Results logged to /home/ross/.rvm/gems/ruby-1.9.3-p392/gems/pg-0.12.2/ext/gem_make.out
An error occurred while installing pg (0.12.2), and Bundler cannot
continue.
Make sure that `gem install pg -v '0.12.2'` succeeds before bundling.
sample_app:$
I was able to overcome this error easily be removing the 'pg', '0.12.2' gem from the Gemfile & replacing it after running the bundle update command. This seems to work fine as the 'pg', '0.12.2' gem is aslo omitted in the without production flag in the latter bundle install --without production.
The 'pg', '0.12.2' gem is only needed for deploying to heroku with the correct database & everything works fine even when I deployed it to heroku but I'm just wondering if this is an error in the Tutorial or am I missing something bigger here?
It's also annoying to have to remove this Gem everytime I run bundle update, is bundle update really that necessary?
Thanks in Advance
I'm following the same tutorial and I think it's redundant to run update without modifying existing dependency, but in this case it's even causing problems because update command has not --without argument.
I stumbled upon Rails 3 cheatsheet which mentions bundler workflow this way:
After adding or removing dependencies from Gemfile
$ bundle
Commit Gemfile and Gemfile.lock
After modifying existing dependency versions
$ bundle update
Commit Gemfile and Gemfile.lock
I read man pages for bundle update and tried RECOMMENDED WORKFLOW which consists of running bundle update after bundle install.
In my case (some output omitted):
$ bundle install --without production
Resolving dependencies...
Using rake (10.0.3)
...
Installing rspec-core (2.11.1)
Your bundle is complete!
Gems in the group production were not installed. <-- check
$ bundle update
Resolving dependencies...
Using rake (10.0.3)
...
Using uglifier (1.2.3)
Your bundle is updated!
Gems in the group production were not installed. <-- check
I tried it with new RVM gem set and everything was installed correctly.
After that Gemfile.lock contains pg (0.12.2) and deploying to Heroku works.
RECOMMENDED WORKFLOW
In general, when working with an application managed with bundler, you
should use the following workflow:
After you create your Gemfile for the first time, run
$ bundle install
Check the resulting Gemfile.lock into version control
$ git add Gemfile.lock
When checking out this repository on another development machine, run
$ bundle install
When checking out this repository on a deployment machine, run
$ bundle install --deployment
After changing the Gemfile to reflect a new or update dependency,
run
$ bundle install
Make sure to check the updated Gemfile.lock into version control
$ git add Gemfile.lock
If bundle install reports a conflict, manually update the specific
gems that you changed in the Gemfile
$ bundle update rails thin
If you want to update all the gems to the latest possible versions
that still match the gems listed in the Gemfile, run
$ bundle update
Installation of postgres fails with this error : "Can't find the 'libpq-fe.h header"
Looks like a lot of people faced this problem, good news is : stackoverflow has the answer ;)
Can't find the 'libpq-fe.h header when trying to install pg gem
(or at least it should help you to look in the right direction)
When I run
abhay$ gem install capybara-webkit
I get the following error messages.
Building native extensions. This could take a while...
ERROR: Error installing capybara-webkit:
ERROR: Failed to build gem native extension.
/Users/abhay/.rvm/rubies/ruby-1.9.2-p180/bin/ruby extconf.rb
Gem files will remain installed in /Users/abhay/.rvm/gems/ruby-1.9.2-p180/gems/capybara- webkit-0.12.1 for inspection.
Results logged to /Users/abhay/.rvm/gems/ruby-1.9.2-p180/gems/capybara-webkit-0.12.1/./gem_make.out
I had to install QT link as capybara-webkit gem uses it to compile and install.
This sounds a lot like a duplicate of this https://stackoverflow.com/a/11622193
I found the solutions in this answer worked well:
https://stackoverflow.com/a/11622193/3088748
I add this to Gemfile:
gem 'omniauth-facebook'
Then I run bundle update. No problem so far. But when I run rails server I get this error:
Could not find hashie-1.2.0 in any of the sources
Run `bundle install` to install missing gems.
I thought that bundler was supposed to resolve and satisfy all dependencies, but I tried this anyway:
gem install hashie-1.2.0
Which gave this:
ERROR: Could not find a valid gem 'hashie-1.2.0' (>= 0) in any repository
ERROR: Possible alternatives: hashie-model
I'm new to Rails and I feel I'm at a dead end. Suggestions?
UPDATE: I also have run bundle install (to be exact bundle install --without production) several times. I get the same error when running rails server after that.
UPDATE: I aslo tried adding gem 'hashee' in the Gemfile before omniauth-facebook. No luck.
So I think you are just using bunder incorrectly.
bundle update doesn't resolve new dependencies, it simply looks at the gem manifest, which is stored in Gemfile.lock and updates those gems to the most recent gem allow by the constraints placed on them in the Gemfile.
Since you are trying to install a new gem, what you what to run is bundle install which will make a comparison between your Gemfile and your Gemfile.lock and install any gems that are not listed in your Gemfile.lock.
I think bundle install should do the trick for you.
As a side note, bundler tries to make this as easy as possible for you by aliasing bundle to bundle install. So, unless you are explicitly looking to update your gems, you can just type bundle and get the behavior that you are expecting.
I got it working. I think it was some problem with bundler. I did some different things, and I have to admit that I'm not 100% sure what fixed it. I think what did it was this:
gem uninstall bundler
gem install bundler
bundle install mail
However, it did not work until my second reinstall I think. Upon the install command, it installed everything, not just mail and its dependencies. The only other thing I did was to delete /usr/bin/bundler after the first reinstall. It did not reappear.
I'm using Ubuntu 11.10 and the terminal to install and run Rails. Here
is the process I've taken so far to setup Rails:
download and install Ruby 1.9.2 and Rails 3.1.0
-- I did this using sudo apt-get ruby1.9.1 and sudo gem install
rails
I made a new rails app using rails new path/to/app
I went to the new app directory and tried running rails server and got an
error about not having a JS ruby environment
I had to get a JS runtime environment for execjs so I downloaded 'therubyracer'
as well as 'therubyrhino' and added them to my gem file, one at a time like this:
gem
'therubyracer' then ran bundle install
After everything was successful with the install, I ran rails server again
-- with both runtime environments I have had similar errors:
Could not find libv8-3.3.10.4 in any of the sources
Run `bundle install` to install missing gems.
Could not find therubyrhino-1.73.0 in any of the sources
Run `bundle install` to install missing gems.
Bundle knows where these programs live, giving correct pathnames when I
enter bundle show libv8 or bundle show therubyrhino. They are both
in /usr/lib/ruby/gems/1.9.1/gems/_ where all the other gems are
located for the bundle install.
Does anyone know where this exception is coming up in the Rails source
code? Does anyone know how Rails is gathering the gems? Better yet,
anyone had this problem and know how to fix it?
Thanks so much,
Feav
Have you tried starting the server using bundle exec rails server?
This problem has been fixed in a newer version of Rails.