Im trying to add a if else type function in the below sql query
SELECT OEEL.invoicedt, UCASE(OEEL.whse) AS Whse, OEEL.orderno, OEEL.ordersuf, OEEL.custno, UCASE(OEEL.shipto) AS Shipto, UCASE(OEEL.slsrepin) AS Slsrepin,
UCASE(OEEL.slsrepout) AS Slsrepout, OEEL.returnfl, OEEL.netamt, OEEL.wodiscamt, OEEL.discamtoth, OEEL.qtyship, OEEL.commcost, ICSS.csunperstk, UCASE(ICSD.name) AS Name,
UCASE(ICSD.region) AS Region, UCASE(OEEL.prodcat) AS Prodcat, UCASE(SASTA.descrip) AS Descrip, UCASE(OEEL.transtype) AS Transtype, UCASE(ARSS.user2) AS User2,
OEEL.transdt, ICSS.transdt AS "ICSS.Transdt", ICSD.transdt AS "ICSD.Transdt", SASTA.transdt AS "SASTA.Transdt", ARSS.transdt AS "ARSS.Transdt", { fn CURDATE() } AS CURDATE1, { fn CURTIME() } AS CURTIME2,
OEEL.lineno
FROM { oj { oj { oj { oj PUB.oeel OEEL LEFT OUTER JOIN
PUB.icss ICSS ON OEEL.cono = ICSS.cono AND OEEL.shipprod = ICSS.prod AND OEEL.icspecrecno = ICSS.icspecrecno } LEFT OUTER JOIN
PUB.icsd ICSD ON OEEL.cono = ICSD.cono AND OEEL.whse = ICSD.whse } LEFT OUTER JOIN
PUB.sasta SASTA ON OEEL.cono = SASTA.cono AND OEEL.prodcat = SASTA.codeval } LEFT OUTER JOIN
PUB.arss ARSS ON OEEL.cono = ARSS.cono AND OEEL.custno = ARSS.custno AND OEEL.shipto = ARSS.shipto }
WHERE (OEEL.cono = 1) AND (OEEL.invoicedt BETWEEN { d '2014-06-02' } AND { d '2014-06-03' }) AND (SASTA.codeiden IN ('C', 'c'))
ORDER By OEEL.custno, OEEL.shipto, OEEL.prodcat
i would the if to be something like
if OEEL.returnfl = False THEN (OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth) AS "SALES"
Else (-1*(OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth)) AS "SALES"
You can add CASE Statement in your query
CASE WHEN OEEL.returnfl = 'False' THEN (OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth) ELSE (-1*(OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth)) END AS "SALES"
Related
im trying to write equivalent of SQL query:
SELECT tax.name as tax, SUM(item.cost * item.amount) as total FROM Invoices inv
JOIN InvoiceItems item ON( item.invoice = inv.id )
JOIN Taxes tax ON( tax.id = it.tax )
WHERE inv.id = 1
GROUP BY tax.id
I can't figure out how to "add" total column to the query, my code is as follows
val res = Invoices
.innerJoin(InvoiceItems, { Invoices.id }, { InvoiceItems.invoice })
.innerJoin(Taxes, { InvoiceItems.tax }, { Taxes.id })
.slice( Taxes.name.alias("tax"), InvoiceItems.cost, InvoiceItems.amount )
.select { Invoices.id eq 1 }
Is it even possible to do it this way or i have to do it later in code?
You can use TimesOp within Expression.build{} block, like this:
val total = Expression.build { Invoices.cost * Invoices.amount }
val taxAndTotal = Invoices.innerJoin(InvoiceTaxes).innerJoin(Taxes)
.slice(Taxes.name, total)
.select{ Invoices.id eq 1 }
.groupBy(Taxes.id)
.map { it[Taxes.name] to it[total] }
I did not find how can we use times like InvoiceItems.cost times InvoiceItems.amount, but you can construct your own TimesOp object like this:
val taxAlias = Taxes.alias("tax")
val itemAlias = InvoiceItems.alias("item")
val invoiceAlias = Invoices.alias("inv")
println(invoiceAlias
.innerJoin(itemAlias, { invoiceAlias[Invoices.id] }, { itemAlias[InvoiceItems.invoice] })
.innerJoin(taxAlias, { itemAlias[InvoiceItems.tax] }, { taxAlias[Taxes.id] })
.slice(
taxAlias[Taxes.name].alias("tax"),
TimesOp(
itemAlias[InvoiceItems.cost],
itemAlias[InvoiceItems.amount],
InvoiceItems.amount.columnType
).sum().alias("total"))
.select { invoiceAlias[Invoices.id] eq 1 }
.groupBy(taxAlias[Taxes.id])
.prepareSQL(QueryBuilder(false))
)
Outputs the following sql for h2 syntax:
SELECT TAX.NAME tax, SUM((ITEM.COST) * (ITEM.AMOUNT)) total FROM INVOICES inv
INNER JOIN INVOICEITEMS item ON INV.ID = ITEM.INVOICE
INNER JOIN TAXES tax ON ITEM.TAX_ID = TAX.ID
WHERE INV.ID = 1
GROUP BY TAX.ID
i try to get results from table with multiple where and/or clauses.
My SQL statement is:
select *
from ceri.movimentacao_parcela_repasse mpr
inner join ceri.movimentacao_parcela mp on (mp.id_movimentacao_parcela = mpr.id_movimentacao_parcela)
inner join ceri.pedido p on (p.id_pedido = mp.id_pedido)
inner join ceri.produto pd on (pd.id_produto = p.id_produto)
where mpr.id_repasse = 4
and mpr.in_repasse_aberto = 'S'
and ( (pd.id_grupo_produto = 1 and p.id_situacao_pedido_grupo_produto = 7 ) or (pd.id_grupo_produto = 2
and p.id_situacao_pedido_grupo_produto = 17) )
My Code in Laravel is:
first attempt
->where('movimentacao_parcela_repasse.id_repasse', '=', DB::raw('4'))
->where('movimentacao_parcela_repasse.in_repasse_aberto', '=', DB::raw('\'S\''))
->where(function($query) {
$query->where('produto.id_grupo_produto',DB::raw('1')) //-- 1 Pesquisa
->where('produto.id_situacao_pedido_grupo_produto',DB::raw('7')); // 7 -- Finalizado
})
->orWhere(function($query) {
$query->where('produto.id_grupo_produto',DB::raw('2')) //2 Certidão /
->where('produto.id_situacao_pedido_grupo_produto',DB::raw('17')); //17 -- Finalizado
});
// RESULT
and ("produto"."id_grupo_produto" = 1 and "pedido"."id_situacao_pedido_grupo_produto" = 7) or ("produto"."id_grupo_produto" = 2 and "pedido"."id_situacao_pedido_grupo_produto" = 17)
second attempt
->where('movimentacao_parcela_repasse.id_repasse', '=', DB::raw('4'))
->where('movimentacao_parcela_repasse.in_repasse_aberto', '=', DB::raw('\'S\''))
->where(function($query) {
$query->where('produto.id_grupo_produto',DB::raw('1'))
->where('pedido.id_situacao_pedido_grupo_produto',DB::raw('7'))
->orWhere(function($query) {
$query->where('produto.id_grupo_produto',DB::raw('2'))
->where('pedido.id_situacao_pedido_grupo_produto',DB::raw('17'));
});
});
// RESULT
and ("produto"."id_grupo_produto" = 1 and "pedido"."id_situacao_pedido_grupo_produto" = 7 or ("produto"."id_grupo_produto" = 2 and "pedido"."id_situacao_pedido_grupo_produto" = 17))
I do not want the way i wanted
and ( (pd.id_grupo_produto = 1 and p.id_situacao_pedido_grupo_produto = 7 ) or (pd.id_grupo_produto = 2 and p.id_situacao_pedido_grupo_produto = 17) )
Try this:
->where('movimentacao_parcela_repasse.id_repasse', '=', DB::raw('4'))
->where('movimentacao_parcela_repasse.in_repasse_aberto', '=', DB::raw('\'S\''))
->where(function($query) {
->where(function($query) {
$query->where('produto.id_grupo_produto',DB::raw('1'))
->where('pedido.id_situacao_pedido_grupo_produto',DB::raw('7'))
})
->orWhere(function($query) {
$query->where('produto.id_grupo_produto',DB::raw('2'))
->where('pedido.id_situacao_pedido_grupo_produto',DB::raw('17'));
});
});
All,
This is my first post to this forum and I have searched all throughout this site to find an answer to my question, but it looks like there is not an example of what I need to do.
Below is a SQL query I need to adapt to a LINQ statement:
select COUNT(pe2.*)
from SomeTable pe1
inner join SomeTable pe2 on (pe2.Id=pe1.Id and pe2.TypeCode='X')
where pe1.TypeCode='Y'
I have tried to join this as illustrated below, but it doesn't work:
var query = (from pe2 in SomeTable
join pe1 in SomeTable
on new { pe1.Id } equals new {pe2.Id }
where pe2.TypeCode == "X"
&& pe1.TypeCode == "Y"
select pe2).Count();
Since the TypeCode is HardCoded you can pass it to the where clause
select pe2.*
from SomeTable pe1
inner join SomeTable pe2 on pe2.Id=pe1.Id
where pe1.TypeCode='Y'
and pe2.TypeCode='X'
And here it's how I would do it in linq
var l1 = new List<dynamic> { new { Id = 1, Code = "X" }, new { Id = 2, Code = "Y" } };
var l2 = new List<dynamic> { new { Id = 1, Code = "Y" }, new { Id = 2, Code = "X" } };
//lambda expression
l1.Join(l2,
x => x.Id,
y => y.Id,
(x, y) => new { Pe1 = x, Pe2 = y })
.Where(x => x.Pe1.Code == "Y" && x.Pe2.Code == "X")
.Select(x => x.Pe2);
//query...
from x in l1
join y in l2 on x.Id equals y.Id
where x.Code == "Y"
&& y.Code == "X"
select y
from x in l1
from y in l2
where x.Id == y.Id
&& x.Code == "Y"
&& y.Code == "X"
select y
i would like to subtract the "alias" i created called "SALES" & "GP" and create a new column call GP
SELECT OEEL.invoicedt, UCASE(OEEL.whse) AS Whse, OEEL.orderno, OEEL.ordersuf,
OEEL.custno, UCASE(OEEL.shipto) AS Shipto, UCASE(OEEL.slsrepin) AS Slsrepin,
UCASE(OEEL.slsrepout) AS Slsrepout, OEEL.returnfl, OEEL.netamt, OEEL.wodiscamt,
OEEL.discamtoth, OEEL.qtyship, OEEL.commcost, ICSS.csunperstk,
UCASE(ICSD.name) AS Name, UCASE(ICSD.region) AS Region,
UCASE(OEEL.prodcat) AS Prodcat, UCASE(SASTA.descrip) AS Descrip,
UCASE(OEEL.transtype) AS Transtype, UCASE(ARSS.user2) AS User2,
OEEL.transdt, ICSS.transdt AS "ICSS.Transdt", ICSD.transdt AS "ICSD.Transdt",
SASTA.transdt AS "SASTA.Transdt", ARSS.transdt AS "ARSS.Transdt",
{ fn CURDATE() } AS CURDATE1, { fn CURTIME() } AS CURTIME2,
OEEL.lineno,
CASE
WHEN OEEL.returnfl = '0' THEN (OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth)
ELSE (-1*(OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth))
END AS "SALES",
CASE
WHEN OEEL.returnfl = '0' THEN (OEEL.qtyship*OEEL.commcost*NVL(ICSS.csunperstk,1))
ELSE (-1*OEEL.qtyship*OEEL.commcost*NVL(ICSS.csunperstk,1))
END AS "COST"
FROM { oj
{ oj
{ oj
{ oj PUB.oeel OEEL
LEFT OUTER JOIN PUB.icss ICSS
ON OEEL.cono = ICSS.cono
AND OEEL.shipprod = ICSS.prod
AND OEEL.icspecrecno = ICSS.icspecrecno
}
LEFT OUTER JOIN PUB.icsd ICSD
ON OEEL.cono = ICSD.cono AND OEEL.whse = ICSD.whse
}
LEFT OUTER JOIN PUB.sasta SASTA
ON OEEL.cono = SASTA.cono AND OEEL.prodcat = SASTA.codeval
}
LEFT OUTER JOIN PUB.arss ARSS
ON OEEL.cono = ARSS.cono
AND OEEL.custno = ARSS.custno
AND OEEL.shipto = ARSS.shipto
}
WHERE (OEEL.cono = 1)
AND (OEEL.invoicedt BETWEEN { d '2014-06-02' } AND { d '2014-06-03' })
AND (SASTA.codeiden IN ('C', 'c'))
ORDER BY OEEL.custno, OEEL.shipto, OEEL.prodcat
Add the following at last column
(CASE WHEN OEEL.returnfl = '0' THEN (OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth) ELSE (-1*(OEEL.netamt-OEEL.wodiscamt-OEEL.discamtoth)) END) - (CASE WHEN OEEL.returnfl = '0' THEN (OEEL.qtyship*OEEL.commcost*NVL(ICSS.csunperstk,1)) ELSE (-1*OEEL.qtyship*OEEL.commcost*NVL(ICSS.csunperstk,1)) END) AS GP
I have a working sql statement and want it as linq statement or linq methode chain.
My statement is:
SELECT T1.*
FROM (SELECT Col1, MAX(InsertDate) as Data
FROM Zugbewegungsdaten
GROUP BY Loknummer) as temp JOIN T1
ON (T1.Col1= temp.Col1
AND Zugbewegungsdaten.InsertDate= temp.Date)
WHERE Col3=1
ORDER BY Loknummer
Can anybody help me to translate it?
Edit after comment:
Ok, my result for the inner select:
var maxResult = (from data in context.T1
group data by data.Col1
into groups
select new
{
Train = groups.Key,
InsertDate= groups.Max( arg => arg.InsertDate)
}) ;
I tried the join like this:
var joinedResult = from data in context.T1
join gdata in maxResult on new
{
data.Col1,
data.InsertDate
}
equals new
{
gdata.Col1,
gdata.InsertDate
}
select data;
But i get a compiler error by the join that the typeargument are invalid.
In the case that the join works i whould use a where to filter the joinedResult.
var result = from data in joinedResult
where data.Col3 == true
select data;
After much more "try and error", I got this version it looks like it works.
var joinedResult = ( ( from data in context.T1
group data by data.Col1
into g
select new
{
Key= g.Key,
Date = g.Max( p => p.InsertDate)
} ) ).Join( context.T1,
temp => new
{
Key = temp.Key,
InsertDate = temp.Date
},
data => new
{
Key = data.Col1,
InsertDate = data.InsertDate
},
( temp,
data ) => new
{
temp,
data
} )
.Where( arg => arg.data.Col3)
.OrderBy( arg => arg.data.Col1)
.Select( arg => arg.data );
Could it be that i have to set the same property names (Key, InsertDate) by joins over multi columns?