I have an existing weblogic domain. I want to get a list of domain creation and extention templates which have already been added to that domain. [using addTemplate() WLST command ] .
Is there a way to do that though WLST?
I am new to weblogic and WLST and would appreciate any help.
The templates which have been already added to domain, their information is maintained in $DOMAIN_HOME/init-info/domain-info.xml. But I would rather get it through WLST than using file parsing on this .xml .
If someone can suggest a solution where we can browse to some diectory in domain tree [ after doing readDomain()] which will have applied template information, this will solve my purpose.
I have gone though WLST command reference : http://docs.oracle.com/cd/E25054_01/web.1111/e13813/reference.htm#i1155751
But there is no template information related command.
Thanks in advance for response !
'showTemplates()' will do the trick. First read the domain using readDomain command and then use showTemplates.
wls:/offline>readDomain(<Absolute path to DOMAIN_DIR>)
wls:/offline/<domain_name>>showTemplates()
Related
I created a new Hybris extension using one of the given templates.
The build was successful and I am able to start the server, too.
But when opening the weblink from the HAC I get the error "Cannot find CMSSite associated with current URL".
Are there suggestions to solve or investigate this issue?
You need to use hosts file mappings or use the site-ID parameter to avoid a 500 error.
Please follow these link
https://wiki.hybris.com/display/accdoc/Just+One+Storefront
https://help.hybris.com/6.3.0/hcd/8ae0711f86691014877ae05249b2f5ac.html (Hybris 6)
If you have administrator rights, it is a good idea to add the following entries in your host file.
127.0.0.1 hybris.local [Example]
The etc hosts modification allows the accelerator to identify sites (CMSSites) from the url. This makes the URL neat and clean.
After host file change, You can access the site like this
http://hybris.local:9001/yacceleratorstorefront/
If you don't do this, the sites would need to be identified with an additional request parameter like this
http://localhost:9001/yacceleratorstorefront/?site=hybris&clear=true
Error "Cannot find CMSSite associated with current URL".
This is because you are not telling hybris which site you want to access.
There are three ways to do that
Simply pass your siteID as a request parameter(?site=SiteID) in your first request which helps the Hybris to understand which site you are trying to access. Let's say I'm trying to access powertools site then URL would be
https://localhost:9002/yacceleratorstorefront?site=powertools
Access site with siteID as DNS name. You can make 127.0.0.1 host with <siteID>.local. Let's say I want to access a powertools (It's CMSSite id for powertools), then add an entry like 127.0.0.1 powertools.local in your host file and then access your site using http://powertools.local:9001/yacceleratorstorefront/ instead of localhost
Add a new regular expression of your choice in the urlPatterns of your CMSSite. So that you can access your site as you want. Let's say I want to access site using localhost URL only and without passing ?site=powertools ever. So I need to add a new regex like (?i)^https?://[^/].*$ to urlPatterns of powertools CMSSite. Now I can directly open powertools site using https://localhost:9002/yacceleratorstorefront/
You can do that using Impex as well
$siteUid=mysite
# CMS Site
INSERT_UPDATE CMSSite ; uid[unique=true] ; urlPatterns ;
; $siteUid ; (?i)^https?://[^/]+(/[^?]*)?\?(.*\&)?(site=$siteUid)(|\&.*)$,(?i)^https?://$siteUid\.[^/]+(|/.*|\?.*)$,(?i)^https?://[^/].*$ ;
Find the detailed answer here
In addition to the host entry, make sure to add the appropriate regular expression for your website.
The CMS site has an attribute called urlPatterns. This is a list of regular expressions that the website CMS filters match to determine which storefront a user is trying to access.
The simplest thing is to add a further regular expression to the CMS site like the one below:
(?i)^https?://[^/]*/yacceleratorstorefront((?![\?\&]site=).)*
At run time, you can can do it in the hybris Management Console(hMC). Navigate to WCMS Website Your Site Name Properties tab and edit URL Patterns section.
To make the change permanent, add the appropriate code to the CMS site setup ImpEx script run during the project data phase of initialization e.g. for electronics storefront
# CMS Site
UPDATE CMSSite;uid[unique=true];urlPatterns;
;electronics;(?i)^https?://[^/]+(/[^?]*)?\?(.*\&)?(site=electronics)(|\&.*)$,(?i)^https?://electronics\.[^/]+(|/.*|\?.*)$,(?i)^https?://api\.hybrisdev\.com(:[\d]+)?/rest.*$,(?i)^https?://[^/]*/yacceleratorstorefront((?![\?\&]site=).)*;
This issue usually comes up if the server was started with unsatisfied spring bean dependencies. Please check your server startup log to confirm which particular bean or beans failed to initialise.
I'm running MarkLogic 8 (developer edition) on Mac OS 10.10.1.
I'm a beginner with ML, and I'm reading the "Getting Started" material in the online docs, in particular the section "Sample XQuery Application that Runs Directly Against an App Server."
I created the "TestServer" app server just fine, following the instructions. I then copied and pasted the text for the four XQuery files in the exercise, load.xqy, dump.xqy etc.
My local copies of the four .xqy files are under ~/Library/MarkLogic/Apps/Test, per the instructions. Read and execute permissions are open along the entire filepath, down to the .xqy files themselves.
When I request http://localhost:8005/Test/load.xqy, as instructed, I get a 404 Not Found response.
lsof -i :8005 indicates that MarkLogic is indeed listening on port 8005.
I checked the TestServer configuration against the instructions, disabled and re-enabled TestServer, stopped and re-started ML--always with the same result: 404 Not Found.
I haven't been able to find anything in either the ML mail archives or Stackoverflow to get me past this sticking point.
Any ideas or suggestions would be very much appreciated. Thank you!
This seems like a permission issue. Does it work when you run it as the admin user?
Have check to make sure the files are loaded into the modules database?
Also check the permission got set with the correct role for those file.
Check to see that user that is running the app has the role that you used when setting permission on those file.
This worked for us:
In the TestServer configuration instead of just putting Test in root field, put Apps/Test/ which is the location of the 4 files (load.xqy,dump.xqy, update-form.xqy and update-write.xqy relative to the MarkLogic installation directory -- in our case, centos, this was at /opt/MarkLogic/)
And then issued this command
chmod +r *.xqy
If you follow all the instructions correctly just remove the Test from the url. If yours is "http://localhost:8005/Test/load.xqy" make it "http://localhost:8005/load.xqy"
I tried the example provided by the Apache Solr package.
I was trying to create a new data collection for my own schema and configurations.
There how should I start running Solr? When I was running the example, there was a start.jar in example directory to start it. Will the same jar work for my case?
If not, how to create a executable for it?
The first line on the solr install page says : "Solr already includes a working demo server in the example directory that you may use as a template" . http://wiki.apache.org/solr/SolrInstall#Setup .
Even if the recomended server is tomcat i have a feeling jetty will work just as well for you. Having the index production ready is more about knowing your fields and query patterns really well, as well as optimising the index through the schema and config for speed according to those patterns
using cpanel server, setting a simple "lynx http://www.domain.com/script.php" command gives following error and I am unable to understand it.
Lynx file "/etc/lynx.lss" is not available.
the problem is the SHELL.
You can solve this problem via two ways:
1] I simply changed the sentence:
SHELL="/usr/local/cpanel/bin/jailshell"
in /var/spool/cron/account
to SHELL="/bin/bash"
2] You can copy file /etc/lynx.lss
to directory: /home/virtfs/account/etc
Both worked for me !
Wilhelm
You can create an empty (or not) style sheet file in a directory where you have write access, then explicitly point to that file on the lynx command-line:
lynx -lss=/path/to/my/lynx.lss ...
I enabled shell access for the account and it started working. The above answer seems to assume you have access to the entire server and can modify those files, if so then just enable shell access and you are set, but if you are on a shared hosting account basic cpanel and ftp access you may not be able to do it. Ask you hosting company if you can have shell access. Then decide what you can do depending on the answer they give you.
you can solve this issue by follow below process :-
Open this file
root#server [~]# vi /var/cpanel/exim.conf.deps
and append below entries and save it.
/etc/lynx.lss
I need to make some configuration changes to slapd.conf. Changes are related to enabling SSL, enabling synch-replication etc.
For example, i need to add following block of configuration in slapd.conf to enable synch-replication over SSL :
TLSCACertificateFile /etc/openldap/cacerts/cacert.pem
TLSCertificateFile /etc/openldap/certs/servercrt.pem
TLSCertificateKeyFile /etc/openldap/certs/serverkey.pem
TLSVerifyClient never
Right now, I am trying to do this with shell script. Script will edit text in slapd.conf using sed, awk commands and some logic to place the text correctly in slapd.conf.
I don't think this is the best way to make configuration changes in slapd.conf.
Is there an API/commands for shell to do the same.
Please also suggest any java api for the same ?
I am using OpenLDAP.
Thanks in Advance.
If you used online configuration with the -F slapd.d option you could do it via an LDAP API.