I am using OpenERP for my company, and I'm trying to log in using LDAP.
I downloaded the ldap_auth plugin, and configured my company's settings.
After I configured, I logged out as an administrator and tried to log in using LDAP settings, but with no success.
"Username or Password is Wrong".
I want the user to write his E-Mail on the "User" field, and his Password on the "Password" field. But I don't know how to do this.
EDIT: I have python-ldap 2.7 installed.
Here are my settings:
You have to change the "Filtro LDAP" field to the appropriate email field on your LDAP tree, so where you have "AMAccountName=%s" you should have "wtv_name_of_field_you_want_to_check_in_your_LDAP_tree=%s".
Since you have the "Criar utilizador" checked, you have to select a default user in the "Utilizador modelo" dropdown, users that authenticate sucessfully on LDAP will be created on OpenERP db with the same access rights as that default user.
Also, if your server allows anonymous binding, you don't need to fill the "Senha LDAP" field, since you are not going to make changes on LDAP side.
You might want to populate your users and store them in your OpenERP database, for that you'll need to install the "LDAP Populate" module, I advice you to install also the "LDAP mapping for user name and e-mail" in order to map and store users real (full) name and email.
And finaly, note that you can have users that authenticate locally (e.g. admin user) and users that authenticate in LDAP. LDAP is queried after the local database and only when local authentication fails.
Related
I installed Openldap in server and after that added the user into the ldap,below screen show show the added user through Apache Active Directory
Now in keycloak i added user federation as a openLdap and its connecting to ldap without any issue,but when i am trying to sync the user i am getting message
Success! Sync of users finished successfully. 0 imported users, 0
updated users
So no user import from ldap to keycloak ,below is the related ldap connection information in keycloak .
Thanks to #EricLavault and one of company colleague at last Keycloak able to import the user successfully. Below changes i have done to fix the issue.
Change the User Object Classes=*
Created a new entry ou=People then created user under it
In Keycloak used Users DN = ou=user,ou=people,dc=suredev20
After this its start throwing below exception
ERROR [org.keycloak.storage.ldap.LDAPStorageProviderFactory] (default
task-1931) Failed during import user from LDAP:
org.keycloak.models.ModelException: User returned from LDAP has null
username! Check configuration of your LDAP mappings. Mapped username
LDAP attribute: uid, user DN:
cn=subodh123,ou=user,ou=People,dc=suredev20, attributes from LDAP:
{sn=[joshi123], cn=[subodh123], createTimestamp=[20191118180647Z],
modifyTimestamp=[20191118180647Z]}
Which is fixed by using Username LDAP attribute = cn as ldap username Attribute description in openldap case bydefault cn
User entries are not stored correctly in your directory. In fact you shouldn't use cn=root as a container as it's supposed to represent the directory manager and should be used for binding and other operations but not for structuring your directory.
Instead, you should use the default user container (at least for OpenLDAP and Apache DS) that is ou=people,dc=suredev20, ie. you need to move cn=subodh
from cn=subodh,ou=user,cn=root,dc=suredev
to cn=subodh,ou=people,dc=suredev20
Also, in Keycloack you need to set users dn accordingly : ou=people,dc=suredev20
(you can try with ou=user,cn=root,dc=suredev without moving subodh entry but not recommended).
In our SonarQube instance we have recently enabled LDAP authentication. Prior to LDAP integration the users were manually created. It so happened some of the users were created using the same LDAP user ID and custom password.
Now when LDAP is integrated we want all users use the LDAP ID/pass instead of previously manually created ID/password. SonarQube login works with manually created password rather than LDAP password. So how do remove the manually created users and only activate the LDAP users?
PS: I dont see the option to delete but only to de-activate
As replied by Jeroen Heier in comments, removing users from Administration > Security > Users will allow you to reuse the login of the removed user with an LDAP account.
If it's not the case, please describe what you're doing.
While I'm concerned with the deletion of an account... why can't you re-activate a user if you de-activated them through the UI. This is incredibly painful if a user was accidentally deactivated.
I am trying to configure Grafana for my organization. I was able to configure LDAP and MySQL database pretty easily but when I try to invite a new user to an org in Grafana, it always asks the user to join Grafana.
This would be an OK behavior if at that point Grafana would authenticate against LDAP. Instead, it creates a new user in its own database. This would lead to conflict with LDAP in case the user's AD passwords changes.
This works perfectly when a user had previously logged in to Grafana. An invite sent after would directly take the user to login page.
Is it possible to do the same in case the user is not already registered in Grafana? I really want to avoid saving user credentials in Grafana database.
Any help would be appreciated. Thanks.
I am not a Grafana expert, but looking through the source code on GitHub it certainly seems that new user registration will not go through LDAP. This is obvious in the LDAP related configuration file where you see the read-only credentials needed to look up users in the LDAP directory. A read-only administrator in LDAP will not be able to create new users as this would be necessary during a registration step. The code also indicates that registration creates temporary users in the internal store.
I have a question about Liferay.
I have configuate my system with Liferay + Jasig CAS Authentication and OpenLDAP.
I can authenticate my user correctly and I can import user account from LDAP (Ldap import).
I have also configurate the user export to OpenLDAP..so, now I can export an account when this will be create.
Infact I can see this new account in my OpenLDAP server.
When Liferay create a new account it generate a random password for this new account (for example 4hdsdsh) and the user receive an e-mail after the registration.
The problem is: I my OpenLDAP server this password does not seem to be equal to the one just generated by Liferay..
So, the new user will never be able to authenticate into my Liferay (because I use CAS + LDAP).
I also found a funny/strange thing: If I modify this new password in Liferay (using an administrator account) I see this password correctly into my OpenLDAP server and so, the user can finally log into my Liferay..
I am not sure but it seems while user registration it is just exporting the fields entered by user in registration screen and since the password is auto generated after registration, it is not exported to LDAP and might be blank till User has not updated his password by Logging in.
You can debug this class PortalLDAPExporterImpl.Java and also watch user detail in LDAP via jxplorer whats the password & user status as well. If password is blank you could extend class and your logic to pass auto generated or default password for first time case.
This is a bug of Liferay:
See following issue: https://issues.liferay.com/browse/LPS-43045
I have this problem:
I have enabled Liferay to import and export users from/to OpenLDAP server.
When I create a user in Liferay I obtain this page:
So, I have create a new user and Liferay has assigned to it a password (3zbPk6KA).
But.. if I try to login with new user (and generated password) I obtain the error message of incorrect credentials. In LDAP server I can see the new account but, the corresponding password seems to be different from that generated by Liferay..
In Java console i read this warning:
14:20:15,882 WARN [http-bio-8080-exec-6][LDAPAuth:208] Passwords do not match for userDN cn=myUser,ou=users,dc=myProject,dc=com
Some suggestions?
Had this problem too. what's your value for Ldap password policy and what's your liferay version ?
I think you have 2 options :
Disable Ldap password policy, and if your Liferay version has no bug on exporting new user's autogenerated passwords, Your scenario is supposed to work. Else, you'll have to create a patch/hook that sends that password to LDAP
Enable LDAP password policy, setup a fixed default LDAP password, and hook the login process, so that you inform the new registered user (Screen Message + validation email) on her initial password. Note that there's still a security issue here, because of the fixed password, as someone could create accounts for other users if he knows their e-mails and tries to register before them.
You have to unmark "required" in controlpanel→portal→configuration→autenticathion→LDAP to di
I don't know why that specific scenario doesn't work. I have used Liferay 6.1 and know there are a number of bugs with the LDAP function of version 6.1. The problem that I faced was that checking "Use LDAP Password Policy" resulted in a user being created without a password.
However, if your password is being created in Liferay, you can turn off the export in Liferay LDAP wizard and programmatically export users through a hook using Java LDAP look up. I had to do it and it fixed a number of similar issues for me.
The link is a below
http://abhirampal.com/2014/12/20/liferay-ldap-export-to-active-directory-disabled-user-bug/