I installed drupal7 in my system using command sudo apt-get install drupal7, it was installed in /use/share folder, my localhost was configured to /var/www. I was able open drupal site in localhost/drupal7/ but i didnt had any drupal7 folder in /var/www. Now due to permissions issues i moved the drupal7 folder to /var/www now i am getting 404 error when i open localhost/drupal7. how to make this work properly....
open this file
sudo nano /etc/apache2/sites-available/drupal7
"sites-available" it means where your site is avalable for example "htdocs"
and change line DocumentRoot "old address" to this
DocumentRoot /var/www/drupal7
if it's not exist so make file drupal7 and past
<VirtualHost *:80>
ServerAdmin webmaster#drupal7
ServerName drupal7
DocumentRoot /var/www/drupal7
</VirtualHost>
and run
sudo a2ensite drupal7
restart your apache with this command
sudo service apache2 restart
Related
I have phpList already setup and Codeigniter project that I want to add in one server.
The phpList configuration which is located /etc/httpd/conf.d/phplist.conf has:
<VirtualHost *:80>
ServerName phplist.example.com
ServerAdmin admin#example.com
DocumentRoot /var/www/phplist-3.0.5/public_html
LogLevel warn
ErrorLog /var/log/httpd/phplist_error.log
CustomLog /var/log/httpd/phplist_access.log combined
</VirtualHost>
Here is my possible setting for the CI project, but I don't know how to create one.
<VirtualHost *:80>
ServerName listcsv.com
ServerAdmin admin#listcsv.com
DocumentRoot /var/www/citest/index.php
</VirtualHost>
Below the /etc/httpd/conf/httpd.conf file has a IncludeOptional conf.d/*.conf so I think this would include the configuration file on phplist.
I don't know what settings and where configuration file should I go,
should I edit on /etc/httpd/conf/httpd.conf or just add it together with the phpList configuration at /etc/httpd/conf.d/phplist.conf?
I tried accessing phplist at http://phplist.example.com but the site cannot be reached.
I could access the phpList by going to http://server-ip-address/lists/admin on the browser.
Also, I cannot access the CI project.
I would recommend creating the directory that the virtual hosts will be stored in, as well as the directory that tells Apache that a virtual host is ready to serve the website
sudo mkdir /etc/httpd/sites-available # vhost files
sudo mkdir /etc/httpd/sites-enabled # symbolic links for vhost enabled
Tell Apache where to look for virtual hosts
sudo vim /etc/httpd/conf/httpd.conf
Add this line at the end of the file
IncludeOptional sites-enabled/*.conf
Save and exit.
For each website/domain create its own vhost
sudo vim /etc/httpd/sites-available/example1.com.conf
sudo vim /etc/httpd/sites-available/example2.com.conf
sudo vim /etc/httpd/sites-available/example3.com.conf
Enable the virtualhost
sudo ln -s /etc/httpd/sites-available/example1.com.conf /etc/httpd/sites-enabled/example1.com.conf
sudo ln -s /etc/httpd/sites-available/example2.com.conf /etc/httpd/sites-enabled/example2.com.conf
sudo ln -s /etc/httpd/sites-available/example3.com.conf /etc/httpd/sites-enabled/example3.com.conf
We done, restart your Apache server for the changes to take affect
sudo apachectl restart
Don't forget to point your domains to the web server's public IP address.
I'm currently creating an application using AWS AMI, and it comes w/ an httpd 2.4.10. Here was the steps I followed on creating the vhost
sudo mkdir /etc/httpd/sites-available
sudo mkdir /etc/httpd/sites-enabled
edited /etc/httpd/conf/httpd.conf to have IncludeOptional sites-enabled/*.conf
created realtydig.conf inside /etc/httpd/sites-available
symlinked it to /etc/httpd/sites-enabled
sudo apachectl restart
sudo service httpd restart
*still the default httpd page is the one showing, vhost not pointing to domain
here's the vhost
xml
<VirtualHost *:80>
ServerName beta.realtydig.com
DocumentRoot /var/www/realtydig/laravel
<Directory "var/www/realtydig/laravel/public">
AllowOverride all
</Directory>
</VirtualHost>
I would like to understand, what happened wrong. It seems to be loading up since error occured w/ some of my previous typos when i was trying to restart the application.
If "nothing happened" then I assume that you see just white empty page in browser. Usually some other vhost will be see if current vhost is not activated.
DocumentRoot must be pointing to the public folder like this
DocumentRoot /var/www/realtydig/laravel/public
You can debug by creating test.html inside the DocumentRoot and try to access it from the browser.
I have various virtual hosts for my web development work, including
cnm. The
sites-available/cnm
my file says very simply:
<VirtualHost *:80>
ServerName cnm
DocumentRoot /var/www/cnm/public_html
</VirtualHost>
I upgraded to Ubuntu 13.10, and when I point my browser to cnm/, I see the
/var/www/index.html file that seems to be indicated in the default file
sites-available/000-default.conf
which says (among other things):
<VirtualHost *:80>
DocumentRoot /var/www
What do I need to do to get Apache to read my cnm document root when I browse to cnm/ ?
NOTES:
I already tried renaming my sites-available/cnm file to sites-available/cnm.conf and enabling it with a2ensite cnm and service apache2 reload. That is a good thing, but it changes nothing.
I already tried changing <VirtualHost *:80> to <VirtualHost cnm.localhost> or to <VirtualHost cnm>. That did nothing.
Ubuntu 13.10 uses apache 2.4, you should check all your apache configuration. But for this present case you should note that a2ensite and a2dissite commands won't be able to see your files in /etc/apache2/sites-available if it does not end with .conf, so rename it to sites-available/cnm.conf and run a2ensite cnm.
Then your Virtualhost definition is certainly better with *:80, it means this virtualhost is activated for all IP interfaces (*) on port 80. cnm.localhost or cnm are not valid values here, only IP numbers (Ip of your apache server) or * for all, and a port number.
Then check how you configuration is read by apache, running theses commands:
# load apache env
# be careful, there is a dot and a space
. /etc/apache2/envvars
# Check apache Virtualhosts config
apache2 -S
You should get something like:
VirtualHost configuration:
*:80 is a NameVirtualHost
default server something (/etc/apache2/sites-enabled/000-default.conf:1)
port 80 namevhost something (/etc/apache2/sites-enabled/000-default.conf:1)
port 80 namevhost cnm (/etc/apache2/sites-enabled/cnm.conf:4)
If it is ok, and if you have the right Ip in your hosts file for cnm, and you can test that with a ping, then using http://cnm/ should use the Virtualhost having cnm in the ServerName.
If you have an answer from the default Virtualhost then it means apache is not finding the name used in your Host header in the list of ServerName and ServerAlias available for that IP/port and fallbacks to the default Virtualhost. If you are really stuck (and you did not forgot to restart) you can always remove the default Virtualhost and keep only the one you are working on.
I found the answer to my issue. I needed to delete the files in /etc/apache2/sites-enabled.
Delete files in /etc/apache2/sites-enabled
Rename config files in /etc/apache2/sites-available to have a .conf ending
For each file in sites-available, run sudo a2ensite mysite.
Run sudo service apache2 reload
I couldn't find any step by step tutorial on how to make it work on my side. I gathered bits and pieces here and there, so for those who need all the steps to follow, here there are:
$ sudo cp /etc/apache2/sites-available/000-default.conf /etc/apache2/sites-available/local-mydefault.conf
$ sudo gedit /etc/apache2/sites-available/local-mydefault.conf
Paste the following into the local-mydefault.conf file (Change the path '/your/full/path' to where you want to have your files. And change username to your own username):
# ------------------------------------------------------
<VirtualHost *:80>
ServerName localhost
ServerAdmin webmaster#localhost
DocumentRoot /your/full/path
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /your/full/path>
DirectoryIndex index.php
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Require all granted
allow from all
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
User username
Group username
# ------------------------------------------------------
Then type the following commands
$ cd /etc/apache2/sites-available/
$ sudo a2ensite local-mydefault.conf
$ sudo a2dissite 000-default.conf
$ sudo /etc/init.d/apache2 restart
I found the answer to this issue:
When upgrading to Ubuntu 13.10, the DocumentRoot does not seem to make a difference.
This is because Apache 2.4 moved the Directory configuration somewhere else. Your old .conf files still have these lines:
DocumentRoot "/var/www/myVhost"
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory "/var/www/myVhost">
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
allow from all
</Directory>
Remove (or comment out) the <Directory> directives so you only have:
DocumentRoot "/var/www/myVhost"
Now reload your settings: service apache2 reload and DocumentRoot is back. :)
Rename the file configuration "cnm" with the extension .conf
mv sites-available/cnm sites-available/cnm.conf
a2ensite sites-available/cnm.conf
And ready!
service apache2 reload
I have the same issue
on way is to disable 000-default and reload apache ,but this isn't the solution becuase you must have just one vhost at a same time :(
sudo a2dissite 000-default.conf
sudo service apache2 reload
I ran into a similar issue. My server name and my FQDN were the same to the default was running into the /var/www/html directory. I disabled the default configuration and my site worked like a breeze. Thanks #regilero.
sudo a2dissite 000-default.conf
fixed it for me.
I want to create VHost on my machine.
My config:
/etc/hosts
127.0.0.1 mysite.dev
/etc/apache2/sites-available/mysite.dev
<VirtualHost *:80>
SetEnv APPLICATION_ENV "development"
ServerName mysite.dev
DocumentRoot /home/michal/Public/mysite/public/frontend
<Directory /home/michal/Public/mysite/public/frontend>
Options Indexes FollowSymLinks Includes
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
After I run
sudo a2ensite mysite.dev
sudo /etc/init.d/apache2 restart
Now when I type mysite.dev to the browser, I see standard Apache index.html ("It works!"). Why? Where should I find my problem?
Not very clear from your question exactly what you want to achieve. If you want forward to specific URL say HTTPS URL then it can be achieve using following lines:
<VirtualHost *:80>
ServerName localhost:80
RedirectMatch permanent ^(.*)$ https://localhost:8443$1
</VirtualHost>
If you are trying to configure apache server , jboss server and mod_jk then you can refer this link
OK, this was asked like a year ago but today I ran into this same problem and probably the solution I found will be very helpful for somebody else, so here it is.
What worked for me was renaming the soft links in /etc/apache2/sites-enabled, appending the extension .conf to every link in that folder.
So if we had the following links:
/etc/apache2/sites-enabled$ ls -l
lrwxrwxrwx 1 root root 23 Nov 30 2012 site1 -> ../sites-available/site1
lrwxrwxrwx 1 root root 23 Nov 30 2012 site2 -> ../sites-available/site2
we should rename both to site1.conf and site2.conf
/etc/apache2/sites-enabled$ sudo mv site1 site1.conf
/etc/apache2/sites-enabled$ sudo mv site2 site2.conf
and then of course, restart apache
/etc/apache2/sites-enabled$ sudo /etc/init.d/apache2 restart
The reason why this worked forme is that Apache has changed sometime in the recent past the way this files should be named in order for them to be loaded correctly, as described in the last lines of apache2.conf file.
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
You are seeing default index.html page because you haven't disabled Apache default virtual host, Disable the default Apache virtual host using the command:
sudo a2dissite 000-default.conf
I have multiple websites setup on my Apache2 server. The directory structure is as follows:
/var/www/
/var/www/site1.com
/var/www/site2.com
It is setup such that "www.site1.com" has root folder /var/www/site1, "www.site2.com" has root folder /var/www/site2, and http://server_ip_address has root folder /var/www
However, if I type http://server_ip_address/site1.com, it opens site1.com. I don't want this to happen. (That is, individual sites should be accessible only by typing the correct address).
What is the way to configure this. (Also it would be helpful if you could give tips on best practices for directory structures for multiple websites)?
thanks
JP
The VirtualHost directive can be used to set individual DocumentRoots for each site name.
Have also a look at this document:
http://httpd.apache.org/docs/2.2/vhosts/name-based.html
Configure multiple websites on Ubuntu
Create apache configuration file:
sudo nano /etc/apache2/sites-available/site1.com
Minimal configuration for the virtual host:
<VirtualHost *:80>
DocumentRoot /var/www/site1.com
ServerName www.site1.com
# Other directives here
</VirtualHost>
Create the root folder:
sudo mkdir /var/www/site1.com
Change the permissions of the folder:
sudo chmod -R 775 /var/www/site1.com/
Create a new record in /etc/hosts
sudo nano /etc/hosts
Add the following line:
127.0.0.1 www.site1.com
Create a correct symlinks in sites-enabled:
sudo a2ensite site1.com
Restart the apache:
sudo /etc/init.d/apache2 restart
You have to do the same with the site2.com, site3.com etc...