I want the output to show to the right of the code, not bellow it. I can change the view to two columns but I can't change the position of the output panel. For example:
Is it possible to change the position of the output panel to be to the right of the code, not below it?
There is a solution, which exists for years already, but does not seem to be widely used. It's the package buildview: it puts the build output in any other view, i.e. acts as a normal tab.
LINK:
https://packagecontrol.io/packages/sublime-text-2-buildview
(perfectly works with sublime 3)
It seems this feature has been requested: http://sublimetext.userecho.com/topic/23694-ability-to-show-console-output-side-by-side-with-code/. So the answer would be no, there's no way to currently do this, and there doesn't seem to be mention of it in the changelog thus far for SublimeText3.
Related
I'm editting a .tsx-file and are reaching upon this bonkers file-formatting:
... If I enlarge the window a bit, then it makes more sense:
But I would still like to change it, so value and onClick aren't aligned all that way to the right. Ideally, it would try to align them with the opening bracket (as they do), unless the opening bracket is more than 35 characters, from the line start. Or something like that.
Now, I assume that it's the TypeScript-formatting that dictates the Code Style for a .tsx-file. But when I open the settings: Editor >> Code Style >> TypeScript then there are BAZILLIONS of settings.
Which leads me to three questions:
Does anyone know what I need to change, so object-attributes doesn't follow the opening-brackets width?
Could I find the name of what I'm looking for, in some smart way? I tried hovering over the massive space, hoping that the little yellow light-bulb could shine some light on, what I was after.
Are there any presets, to be found somewhere? So I don't need to engineer a new Code Style, if I dislike the default.
Make sure that the following option is disabled:
Settings (Preferences on macOS)
Editor | Code Style | TypeScript | Wrapping and Braces
Function call arguments: Align when multiline
NOTE: It is possible that the default value has been changed somewhere since the previous version as I have seen a few questions for the same option but different language (PHP and JavaScript).
HINT 1: Did you know that you can paste your own code in the preview area and start changing options to see how they will affect it? It helps locating the right option a lot.
HINT 2: There is a special popup that shows formatting rules applied to the code. It does not show all possible options but can give you a hint what to look for. To invoke it:
Use Help | Find Action... (or Action tab on Search Everywhere -- they use to be different popups but are using the same popup nowadays)
Type adjust to filer actions
Select and invoke "Adjust code style settings" action
It will give you a popup with applicable rules (it's a limited set: may not list all).
An example for PHP code:
in IDEA ,I can type soutto represent System.out.println();and I want to know how to make my own code abbreviation.For example, alias System.out.print(); to sounor any other names
This is called a Live Template in IntelliJ.
Go to File > Settings > Editor > Live Templates. From there, select Java and on the right, you'll see a plus sign. By clicking it, you'll get a 1. Live Template and that will get you a new abbreviation.
Name it soun and the text should be
System.out.print($END$);
Once you're done, make sure you've enabled that abbreviation by clicking the check box next to it.
The docs of IntelliJ cover in detail what the syntax is for these templates.
The $END$ syntax indicates the position of the cursor when the code snippet is complete, and you can no longer press Tab to jump to the next variable.
There are more variables to look at as well and other configurations to do!
Edit: there is an answer here for this question, but it looks like it doesn't necessarily answer the question asked on that post, so that's why I've decided to post a dedicated answer (tackling the issue at hand).
I have the following keymap.cson file to config my Atom editor:
'body':
'ctrl-shift-cmd-left': 'window:focus-pane-on-left'
Only when I run this command, the current text is selected. Which without the alt key held, would make sense as a highlighting command.
However, is I bind a key command which I think most likely doesn't have a competing action, say alt-cmd-;, it seems to be registered into the list of key commands in Settings/Keybindings, yet again no window focus is happening.
Edit:
I now realize that pane and not window may be the relevant term for what I want. Still, searching the Key Bindings for pane focus switching didn't yield anything obvious. Surely, there must be a simple way to select through files in the Project area while editing.
Although this answer doesn't match the title of the question, based on your edit I think that tree-view:toggle-focus is what you're looking for.
Please try using Ctrl + 0.
And, if you use Nuclide (related to React), please try disabling it to check the difference.
I want to use code snippets in VSCode. But when I type, for example, for in javascript file, the Intellisense doesn't suggest snippet "for-loop" - I need to manually scroll the dropdown and select it. Is there any way to make VSCode to suggest snippets at first? Thank you!
UPD: I have found the person with same problem, but he has no answers - link
You need to use editor.snippetSuggestions config option with "top" value. Please, see Customizing IntelliSense article for more tips and tricks.
There is one more way to deal with this issue by setting
"editor.tabCompletion": true,
that way whenever there is a snnipet available it will use it automatically without even opening the list by using tab twice.
File > Preferences > Settings (Code > Preferences > Settings on Mac)
open "Editor" menu on the left
edit "editor.tabCompletion": true
more info: https://code.visualstudio.com/docs/editor/intellisense#_customizing-intellisense
Now that VS Code mostly abstracted away the settings.json file, you can do the instructions shown by Kavu, with this bonus tip:
go to Preferences > Settings
find the Search settings text input, at the top
type in "snippet"
The setting should be at the top of the result set:
Setting editor.snippetSuggestions to top only works for certain snippets: for but not foreach. With top, the snippet does appear higher in the completion list, but for some reason the keyword version is what is highlighted, with the snippet option scrolled out of view (and the scrollbar quickly fades, giving the impression there's nothing hidden)
The editor.tabCompletion to true approach works for both for and foreach.
I've just started to play araound with PHPStorm and I can't get the live templates to work. For example there's one for a public function..'pubf' then tab to expand however when I tab mine out it looks like this...
<pubf></pubf>
What's going on? Is there a setting I need to enable to get it to work?
Thanks
Just for a little more clarity:
Even though you're under the PHP branch, you still need to apply the abbreviation to an application. Click the "Define" link and check the PHP box.
It was a question of scope for the template, just needed to select the appropriate file types.
Try:
Settings / Emmet and changing the default 'Expand abbreviation with' from tab to say custom
Make sure the context is selected underneath your template text. There is a small 'Change' link there where you set the context. I had to choose all contexts.