Has anyone got some experience with MapServer as a CGI running on IIS7 (WinServer2008)?
I get the CGI running fine with a MSSQL2008 plugin. This however doesn't allow me to use a BBOX filter. I install QGIS in order to get the OGR tools and can no long access my PROJ_LIB thereafter.
I get thereafter the following error response from any WFS requests to the MapServer CGI module:
This page contains the following errors:
error on line 1 at column 1: Document is empty
Below is a rendering of the page up to the first error.
Removing my PROJ_LIB CONFIG reference causes following error excpetion:
msProcessProjection(): Projection library error. Permission denied
I got around this problem for now by using the default Apache setup for MS4W. However this requires me to a use a proxy in order to use the WFS in an IIS hosted OpenLayers site.
I hope someone else has a few ideas in this regard.
Cheers,
Dennis
Related
I have a ASP.NET Core with Blazor website and I want to deploy it to Arvixe host. The website is very simple and contains only UI elements no database required. I published the website to a local file system and uploaded it using FTP to the Plesk.
When I am visiting the website, I receive this error:
500 - Internal server error. There is a problem with the resource you
are looking for, and it cannot be displayed.
I have tried to run it on the IIS and I received more details:
Configuration The configuration file cannot be read due to
insufficient permissions.
I tried to add IIS_IUSRS to the group and users for web.config but I am not able to find it because I am using a windows 10 connected to active directory.
Besides, I still don't know how to solve this problem at Arvixe. Does anyone know tips might help?
500 internal error is generic issue. Please kindly check the error message on the server and paste it here. Make sure that your provider has installed .net core bundled on their server and here are tutorial about publsih .net core using plesk https://windowswebhostingreview.com/how-to-publish-using-web-deploy-with-plesk-control-panel/. It should be working fine.
You need to give Full Trust permission (Read-Write-Execute) to your application folder and also to Application Pool and also check if the Runtime version supported by Arvixe matches with your Asp.net Core version.
Also enable the logs in web.config file by setting stdoutLogEnabled="true" to get detailed error so that you can investigate more about the error.
Good morning . For the first time I have written to stackoverflow.
Currently we have a running server. We are using Apache as the web server and WebLogic 10.3.6 as the WAS server.
There is a problem here ... The WAS server has an action that generates a specific error code when accessing it directly. This particular error code is the 902 error code.
When you log in again, you will be given an error code of 902. If you access WAS directly, it will return error code 902.
However, when you access the web server (domain address), it will return a 500 error code instead of 902. Obviously this seems to be a problem with setting up a web server. I do not know where to return the 500 error code instead of the 902 error code.
Do you have any of these in your Apache configuration? I did not set up my own web server but I did not know that someone else was going out.
If you have a similar experience, please help. Thank you.
Attach a photo caputured by Developer Tools.
I am new to use ArcGis Api for javascript, I am using JS Api 3.20.
I have been trying for 3 days but it does not work.
I have taken code from the following link
Geometry Engine - Geodesic buffers | ArcGIS API for JavaScript 3.20
I paste this in My Html file create in VS website for .Net , and setup a local server for my page using IIS server
I also downloaded proxy from GitHub resource-proxy/DotNet at master · Esri/resource-proxy · GitHub
setup it in same application in IIS
Downloaded excel file added in my application from https://earthquake.usgs.gov/earthquakes/feed/v1.0/summary/4.5_week.csv
but still I am getting the following error in console using developer mode when set Proxy URL to this
config.defaults.io.proxyUrl = "/192.168.8.188/Proxy/proxy.ashx";
GET http://192.168.8.188:1555/192.168.8.188/Proxy/proxy.ashx?http://earthquake.usgs.gov/earthquakes/feed/v1.0/summary/4.5_week.csv 404 (Not Found)
and when I set proxy url to this
config.defaults.io.proxyUrl = "/Proxy/";
then the following error occurs in console
GET http://192.168.8.188:1555/Proxy/?http://earthquake.usgs.gov/earthquakes/feed/v1.0/summary/4.5_week.csv 403 (Forbidden)
Could you please help me out. I would be thankful in advance.
I Resolved My Issue thanks.
Basically I didn't enable IIS 4.5 web features so I read readme file of proxy which resolved my issue.
Here is what I read from ReadMe file located in DotNet folder of Proxy
Troubleshooting: If you get an error message 404.3, it's possible that ASP.NET have not been set up. On Windows 8, go to "Turn Windows features on or off" -> "Internet Information Services" -> "World Wide Web Services" -> "Application Development Features" -> "ASP.NET 4.5".
First off, try setting the proxyUrl value to this:
config.defaults.io.proxyUrl = "/proxy/proxy.ashx";
That may resolve the issue.
EDIT (based on clarification that IIS is in fact running on port 1555):
You might want to confirm that you can access the proxy at all, by entering the proxy url directly in your browser (with no arguments), eg:
http://192.168.8.188:1555/Proxy/proxy.ashx
If this resolves correctly, you should get an error response in JSON format like this:
{error: {code: 400,message:"This proxy does not support empty
parameters."}}
That at least would confirm that the proxy is accessible and functioning properly on your system.
I am backing a web app with a Flask API that returns custom error codes. The API runs through Apache and the WSGI module, in daemon mode.
I included a WSGIErrorOverride Off instruction in the Apache conf file for the API (which is supposed to be the default but I included it anyway).
Yet anytime my Flask app returns a custom error code (they work when I run the app using the built-in server), Apache sends an error 500. How can I prevent that?
Thanks to comments by duskwuff and Graham Dumpleton, I found that the problem doesn't come from Apache WSGI but from my Flask app.
More precisely, I was using the Flask-RESTful package, which is in charge, among other things, of transforming my views' return values into actual responses.
When those views are decorated (here with an equivalent of #login_required), those decorators are called by the Flask-RESTful package itself, and when an exception is thrown, something goes wrong.
For some reason, my app returns the custom error when I run the built-in server and an error 500 when I run it over Apache. Not quite sure why yet, I'm guessing Flask-RESTful is doing something that is not WSGI-compliant. I was on the verge of dropping it anyway for other reasons, so I'm OK with this solution.
Update: it looks like the problem does indeed come from Flask-RESTful: https://github.com/flask-restful/flask-restful/issues/372
I'd like to know how to troubleshoot IIS URL Rewrite module and custom rewrite providers?
I am trying to do a POC on the URL Rewrite Module for our app. Our mappings are all in the database so I thought using the provider that comes as a sample. Got everything installed and configured, as instructed. Created the stored procedure as well. Now when I hit the alias URL I receive HTTP Error 500.50 - URL Rewrite Module Error. Here are the details about the error:
Module RewriteModule
Notification BeginRequest
Handler ExtensionlessUrlHandler-Integrated-4.0
Error Code 0x80070585
In SQL Profiler I see no calls to my stored procedure. The app pool is running under my account (admin rights). No errors in the event logs.
Are there any logs I could look into for more information on what's happening?
I got it working after two days of digging. The samples are good but not good enough: simply using supplied DLLs with supplied config entries doesn't work (for many reasons).
What I ended up doing was getting rid of the DLLs from samples and creating my own provider using the source code from samples and information from this article: Developing a Custom Rewrite Provider for URL Rewrite Module. Then IIS started loading my provider. But in order to make it work correctly I had to get deep understanding of module's config system.
So my answer to my own question -- don't relay on samples alone, they don't work out of the box. Instead, RTFM :) The best place to start is here: URL Rewrite Module Configuration Reference