Trying to do some calculations via SQL on my iSeries and have the following conundrum: I need to count the number of times a certain value appears in a column. My select statement is as follows:
Select
MOTRAN.ORDNO, MOTRAN.OPSEQ, MOROUT.WKCTR, MOTRAN.TDATE,
MOTRAN.LBTIM, MOROUT.SRLHU, MOROUT.RLHTD, MOROUT.ACODT,
MOROUT.SCODT, MOROUT.ASTDT, MOMAST.SSTDT, MOMAST.FITWH,
MOMAST.FITEM,
CONCAT(MOTRAN.ORDNO, MOTRAN.OPSEQ) As CON,
count (Concat(MOTRAN.ORDNO, MOTRAN.OPSEQ) )As CountIF,
MOROUT.SRLHU / (count (Concat(MOTRAN.ORDNO, MOTRAN.OPSEQ))) as calc
*(snip)*
With this information, I'm trying to count the number of times a value in CON appears. I will need this to do some math with so it's kinda important. My count statement doesn't work properly as it reports a certain value as occurring once when I see it appears 8 times.
Try putting a CASE statement inside a SUM().
SUM(CASE WHEN value = 'something' THEN 1 ELSE 0 END)
This will count the number of rows where value = 'something'.
Similary...
SUM(CASE WHEN t1.val = CONCAT(t2.val, t3.val) THEN 1 ELSE 0 END)
If you're on a supported version of the OS, ie 6.1 or higher...
You might be able to make use of "grouping set" functionality. Particularly the ROLLUP clause.
I can't say for sure without more understanding of your data.
Otherwise, you're going to need to so something like
wth Cnt as (select ORDNO, OPSEQ, count(*) as NbrOccur
from MOTRAN
group by ORDNO, OPSEQ
)
Select
MOTRAN.ORDNO, MOTRAN.OPSEQ, MOROUT.WKCTR, MOTRAN.TDATE,
MOTRAN.LBTIM, MOROUT.SRLHU, MOROUT.RLHTD, MOROUT.ACODT,
MOROUT.SCODT, MOROUT.ASTDT, MOMAST.SSTDT, MOMAST.FITWH,
MOMAST.FITEM,
CONCAT(MOTRAN.ORDNO, MOTRAN.OPSEQ) As CON,
Cnt.NbrOccur,
MOROUT.SRLHU / Cnt.NbrOccur as calc
from
motran join Cnt on mortran.ordno = cnt.ordno and mortran.opseq = cnt.opseq
*(snip)*
Related
I have the following query:
SELECT DISTINCT
CAB.CODPARC,
PAR.RAZAOSOCIAL,
BAI.NOMEBAI,
SUM(VLRNOTA) AS AMOUNT
FROM TGFCAB CAB, TGFPAR PAR, TSIBAI BAI
WHERE CAB.CODPARC = PAR.CODPARC
AND PAR.CODBAI = BAI.CODBAI
AND CAB.TIPMOV = 'V'
AND STATUSNOTA = 'L'
AND PAR.CODCID = 5358
GROUP BY
CAB.CODPARC,
PAR.RAZAOSOCIAL,
BAI.NOMEBAI
Which the result is this. Company names and neighborhood hid for obvious reasons
The query at the moment, for those who don't understand Latin languages, is giving me clients, company name, company neighborhood, and the total value of movements.
in the WHERE clause it is only filtering sales movements of companies from an established city.
But if you notice in the Select statement, the column that is retuning the value that aggregates the total amount of value of sales is a SUM().
My goal is to return only the company that have the maximum value of this column, if its a tie, display both of em.
This is where i'm struggling, cause i can't seem to find a simple solution. I tried to use
WHERE AMOUNT = MAX(AMOUNT)
But as expected it didn't work
You tagged the question with the whole bunch of different databases; do you really use all of them?
Because, "PL/SQL" reads as "Oracle". If that's so, here's one option.
with temp as
-- this is your current query
(select columns,
sum(vrlnota) as amount
from ...
where ...
)
-- query that returns what you asked for
select *
from temp t
where t.amount = (select max(a.amount)
from temp a
);
You should be able to achieve the same without the need for a subquery using window over() function,
WITH T AS (
SELECT
CAB.CODPARC,
PAR.RAZAOSOCIAL,
BAI.NOMEBAI,
SUM(VLRNOTA) AS AMOUNT,
MAX(VLRNOTA) over() AS MAMOUNT
FROM TGFCAB CAB
JOIN TGFPAR PAR ON PAR.CODPARC = CAB.CODPARC
JOIN TSIBAI BAI ON BAI.CODBAI = PAR.CODBAI
WHERE CAB.TIPMOV = 'V'
AND STATUSNOTA = 'L'
AND PAR.CODCID = 5358
GROUP BY CAB.CODPARC, PAR.RAZAOSOCIAL, BAI.NOMEBAI
)
SELECT CODPARC, RAZAOSOCIAL, NOMEBAI, AMOUNT
FROM T
WHERE AMOUNT=MAMOUNT
Note it's usually (always) beneficial to join tables using clear explicit join syntax. This should be fine cross-platform between Oracle & SQL Server.
I need to update a column based on the results of a subquery. If the subquery returns results for that column then the columns must be updated, is the query returns no results for that column then I need to update with 0.
I do not know where to place the subquery and how to combine it with the CASE statement. This is what I thought but the syntax is not correct. Can anybody help please?
(SELECT datazones.ogc_fid, count(*) as total
FROM suppliersnew suppliers, datazone_report_resupply datazones
WHERE St_contains(datazones.geom, suppliers.geometry) AND (suppliers.status = 'Under construction' OR
suppliers.status = 'Unknown' OR suppliers.status = 'Operational') GROUP by datazones.ogc_fid ORDER BY total ASC) sources
UPDATE datazone_report_resupply
SET es_actual =
CASE
WHEN datazone_report_resupply.ogc_fid = sources.ogc_fid THEN sources.total
ELSE 0
END
The query is a little hard to follow, because the aggregation is on the outer column (this is unusual). However, you don't need aggregation or order by. You only seem to care whether a row exists.
I think the logic is:
UPDATE datazone_report_resupply r
SET es_actual =
(CASE WHEN EXISTS (SELECT 1
FROM suppliersnew s
WHERE St_contains(r.geom, s.geometry) AND
s.status IN ('Under construction', 'Unknown', 'Operational')
)
THEN 1 ELSE 0
END);
I'm trying to avoid using straight up SQL in my Rails app, but need to do a quite large version of this:
SELECT ds.product_id,
( SELECT SUM(units) FROM daily_sales WHERE (date BETWEEN '2015-01-01' AND '2015-01-08') AND service_type = 1 ) as wk1,
( SELECT SUM(units) FROM daily_sales WHERE (date BETWEEN '2015-01-09' AND '2015-01-16') AND service_type = 1 ) as wk2
FROM daily_sales as ds group by ds.product_id
I'm sure it can be done, but i'm struggling to write this as an active record statement. Can anyone help?
If you must do this in a single query, you'll need to write some SQL for the CASE statements. The following is what you need:
ranges = [ # ordered array of all your date-ranges
Date.new(2015, 1, 1)..Date.new(2015, 1, 8),
Date.new(2015, 1, 9)..Date.new(2015, 1, 16)
]
overall_range = (ranges.first.min)..(ranges.last.max)
grouping_sub_str = \
ranges.map.with_index do |range, i|
"WHEN (date BETWEEN '#{range.min}' AND '#{range.max}') THEN 'week#{i}'"
end.join(' ')
grouping_condition = "CASE #{grouping_sub_str} END"
grouping_columns = ['product_id', grouping_condition]
DailySale.where(date: overall_range).group(grouping_columns).sum(:units)
That will produce a hash with array keys and numeric values. A key will be of the form [product_id, 'week1'] and the value will be the corresponding sum of units for that week.
Simplify your SQL to the following and try converting it..
SELECT ds.product_id,
, SUM(CASE WHEN date BETWEEN '2015-01-01' AND '2015-01-08' AND service_type = 1
THEN units
END) WK1
, SUM(CASE WHEN date BETWEEN '2015-01-09' AND '2015-01-16' AND service_type = 1
THEN units
END) WK2
FROM daily_sales as ds
group by ds.product_id
Every rail developer sooner or later hits his/her head against the walls of Active Record query interface just to find the solution in Arel.
Arel gives you the flexibility that you need in creating your query without using loops, etc. I am not going to give runnable code rather some hints how to do it yourself:
We are going to use arel_tables to create our query. For a model called for example Product, getting the Arel table is as easy as products = Product.arel_table
Getting sum of a column is like daily_sales.project(daily_sales[:units].count).where(daily_sales[:date].gt(BEGIN_DATE).where(daily_sales[:date].lt(END_DATE). You can chain as many wheres as you want and it will be translated into SQL ANDs.
Since we need to have multiple sums in our end result you need to make use of Common Table Expressions(CTE). Take a look at docs and this answer for more info on this.
You can use those CTEs from step 3 in combination with group and you are done!
I have the following sql statement and I want to update a field on the rows returned from the select statement. Is this possible with my select? The things I have tried are not giving me the desired results:
SELECT
Flows_Flows.FlowID,
Flows_Flows.Active,
Flows_Flows.BeatID,
Flows_Flows.FlowTitle,
Flows_Flows.FlowFileName,
Flows_Flows.FlowFilePath,
Flows_Users.UserName,
Flows_Users.DisplayName,
Flows_Users.ImageName,
Flows_Flows.Created,
SUM(CASE WHEN [Like] = 1 THEN 1 ELSE 0 END) AS Likes,
SUM(CASE WHEN [Dislike] = 1 THEN 1 ELSE 0 END) AS Dislikes
FROM Flows_Flows
INNER JOIN Flows_Users ON Flows_Users.UserID = Flows_Flows.UserID
LEFT JOIN Flows_Flows_Likes_Dislikes ON
Flows_Flows.FlowID=Flows_Flows_Likes_Dislikes.FlowID
WHERE Flows_Flows.Active = '1' AND Flows_Flows.Created < DATEADD(day, -60, GETDATE())
Group By Flows_Flows.FlowID, Flows_Flows.Active, Flows_Flows.BeatID,
Flows_Flows.FlowTitle, Flows_Flows.FlowFileName, Flows_Flows.FlowFilePath,
Flows_Users.UserName, Flows_Users.DisplayName, Flows_Users.ImageName,
Flows_Flows.Created
Having SUM(CASE WHEN [Like] = 1 THEN 1 ELSE 0 END) = '0' AND SUM(CASE WHEN [Dislike] = 1
THEN 1 ELSE 0 END) >= '0'
This select statement returns exactly what I need but I want to change the Active field from 1 to 0.
yes - the general structure might be like this: (note you don't declare your primary key)
UPDATE mytable
set myCol = 1
where myPrimaryKey in (
select myPrimaryKey from mytable where interesting bits happen here )
Because you haven't made your question more clear in what result you want to achieve, I'll provide an answer with my own assumptions.
Assumption
You have a select statement that gives you stuffs, and it works as desired. What you want it to do is to make it return results and update those selected rows on the fly - basically like saying "find X, tell me about X and make it Y".
Anwser
If my assumption is correct, unfortunately I don't think there is any way you can do that. A select does not alter the table, it can only fetch information. Similarly, an update does not provide more detail than the number of rows updated.
But don't give up yet, depending on the result you want to achieve, you have alternatives.
Alternatives
If you just want to update the rows that you have selected, you can
simply write an UPDATE statement to do that, and #Randy has provided
a good example of how it will be written.
If you want to reduce calls to server, meaning you want to make just
one call to the server and get result, as well as to update the
rows, you can write store procedures to do that.
Store procedures are like functions you wrote in programming languages. It essentially defines a set of sql operations and gives them a name. Each time you call that store procedure, the set of operations gets executed with supplied inputs, if any.
So if you want to learn more about store procedures you can take a look at:
http://www.mysqltutorial.org/introduction-to-sql-stored-procedures.aspx
If I understand correctly you are looking for a syntax to be able to select the value of Active to be 0 if it is 1. The syntax for something like that is
SELECT
Active= CASE WHEN Active=1 THEN 0 ELSE Active END
FROM
<Tables>
WHERE
<JOIN Conditions>
I get an error unless I remove one of the count(distinct ...). Can someone tell me why and how to fix it?
I'm in vfp. iif([condition],[if true],[else]) is equivalent to case when
SELECT * FROM dpgift where !nocalc AND rectype = "G" AND sol = "EM112" INTO CURSOR cGift
SELECT
list_code,
count(distinct iif(language != 'F' AND renew = '0' AND type = 'IN',donor,0)) as d_Count_E_New_Indiv,
count(distinct iif(language = 'F' AND renew = '0' AND type = 'IN',donor,0)) as d_Count_F_New_Indiv /*it works if i remove this*/
FROM cGift gift
LEFT JOIN
(select didnumb, language, type from dp) d
on cast(gift.donor as i) = cast(d.didnumb as i)
GROUP BY list_code
ORDER by list_code
edit:
apparently, you can't use multiple distinct commands on the same level. Any way around this?
VFP does NOT support two "DISTINCT" clauses in the same query... PERIOD... I've even tested on a simple table of my own, DIRECTLY from within VFP such as
select count( distinct Col1 ) as Cnt1, count( distinct col2 ) as Cnt2 from MyTable
causes a crash. I don't know why you are trying to do DISTINCT as you are just testing a condition... I more accurately appears you just want a COUNT of entries per each category of criteria instead of actually DISTINCT
Because you are not "alias.field" referencing your columns in your query, I don't know which column is the basis of what. However, to help handle your DISTINCT, and it appears you are running from WITHIN a VFP app as you are using the "INTO CURSOR" clause (which would not be associated with any OleDB .net development), I would pre-query and group those criteria, something like...
select list_code,
donor,
max( iif( language != 'F' and renew = '0' and type = 'IN', 1, 0 )) as EQualified,
max( iif( language = 'F' and renew = '0' and type = 'IN', 1, 0 )) as FQualified
from
list_code
group by
list_code,
donor
into
cursor cGroupedByDonor
so the above will ONLY get a count of 1 per donor per list code, no matter how many records that qualify. In addition, if one record as an "F" and another does NOT, then you'll have a value of 1 in EACH of the columns... Then you can do something like...
select
list_code,
sum( EQualified ) as DistEQualified,
sum( FQualified ) as DistFQualified
from
cGroupedByDonor
group by
list_code
into
cursor cDistinctByListCode
then run from that...
You can try using either another derived table or two to do the calculations you need, or using projections (queries in the field list). Without seeing the schema, it's hard to know which one will work for you.