I have two sql queries.
SELECT
DATE_FIRST_TABLE
FROM
FIRST_TABLE
and
SELECT
DATE_SECOND_TABLE
FROM
SECOND_TABLE
The above two queries may return single or multiple records.
I need to check the second query results if any date value is greater than any of the date value of first query results then it will evaluate true.
I need some suggestion on this.
Thanks.
Is this what you want?
select 'true'
from second_table
where date_second_table > (select max(date_first_table) from first_table)
The statement: "I need to check the second query results if any date value is greater than any of the date value of first query results then it will evaluate true." This is a bit hard to follow the logic. The above returns 'true' when the values of the second query are greater than all the values of the first query.
The answer may be:
select max('true')
from second_table
where date_second_table > (select min(date_first_table) from first_table)
A key addition is the max() function, which turns this into an aggregation function so it returns one row.
EDIT:
Your question is ambiguous about what to do in the "false" case. One answer, as you suggest in the comments is:
select (case when count(*) > 0 then 1 else 0 end)
from second_table
where date_second_table > (select min(date_first_table) from first_table);
A similar approach is to use an explicit join. Although this would perform less well, it may better capture the logic:
select (case when count(*) > 0 then 1 else 0 end)
from first_table t1 join
second_table t2
on t1.date_first_table > t2.date_second_table;
SELECT DATE_SECOND_TABLE FROM SECOND_TABLE WHERE DATE_SECOND_TABLE > (SELECT DATE_FIRST_TABLE FROM FIRST_TABLE)
When you say "it will evaluate to true", you do mean it will return the result presumably
Related
I have the following SQL Query :
(SELECT ROUND(SUM(NBTOSUM)/1000000,1) FROM MyTable t2 WHERE t2.ELEMNAME IN ('A','B','C'))
Which works fine.
But Where there is no 'A','B','C' the result of the select is (null)
So to handle it, I did the following :
(SELECT COALESCE(ROUND(SUM(NBTOSUM)/1000000,1),0) FROM MyTable t2 WHERE t2.ELEMNAME IN ('A','B','C'))
And also try :
(SELECT
CASE
WHEN SUM(NBTOSUM)/1000000 IS NULL THEN 0
ELSE ROUND(SUM(NBTOSUM)/1000000,1)
END
FROM MyTable t2 WHERE t2.ELEMNAME IN ('A','B','C'))
But both keep returning null
What am I doing wrong ?
Move the WHERE restrictions to the CASE expression as well:
SELECT ROUND(SUM(CASE WHEN t2.ELEMNAME IN ('A','B','C')
THEN NBTOSUM ELSE 0 END) / 1000000, 1)
FROM MyTable t2;
Note that this trick solves the null problem and also avoids the need for an ugly COALESCE() call.
Your code should work as the SUM aggregation function will generate a single row of output regardless of whether the number of input rows is zero or non-zero. If there are no input rows or the values are all NULL then the output of the SUM will be NULL and then COALESCE would work.
Since you claim it does not then that suggests that there is something else going on in your query that you have not shared in the question.
You have braces around your statement suggesting that you are using it as part of a larger statement. If so, you can try moving the COALESCE to the outer query:
SELECT COALESCE(
(
SELECT ROUND(SUM(NBTOSUM)/1000000,1)
FROM MyTable
WHERE ELEMNAME IN ('A','B','C')
),
0
)
FROM your_outer_query;
That might fix the problem if you are somehow correlating to an outer query but your question makes no mention of that.
fiddle
select case
when COUNT(*)>0 THEN (select TOP 1 A.a1)
else 'none'
end
from A
where A.a1 > 10
order by A.a1
Code above is causing the following error:
Column 'A.a1' is invalid in the select list because it is not
contained in either an aggregate function or the GROUP BY clause.
I could not understand why.
My intention is as follows: If there are rows where A.a1 is greater than 10, order them and take the top rows's a1 value. If there is no such row, select 'none'.
EDIT: It is a simplified version of the actual code that is going to be used in a subquery. So, I cannot use IF..ELSE statements.
You have an aggregation query because you have count(*). These are tricky with subqueries. Instead, you can use:
select (case when count(*) > 0 then A1.a1 else 'none'
end)
from A left join
(select top 1 A.a1) A1
on 1 = 1
where A1.a1 > 10
The logic of this is a bit non-sensical. I assume your actual query is more useful.
I suggest you try with the UNION ALL to solve your Issue. Below Code is for your ref.
DECLARE #T TABLE(ID INT,NAME VARCHAR(200))
INSERT INTO #T VALUES(11,'HAI')
INSERT INTO #T VALUES(12,'H')
SELECT * FROM #T
DECLARE #VAL INT=10
SELECT TOP 1 T.NAME
FROM #T T
WHERE T.ID>#VAL
UNION ALL
SELECT 'None'
WHERE NOT EXISTS (SELECT TOP 1 ID FROM #T WHERE ID>#VAL)
RE: Column 'A.a1' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
COUNT(*) is an aggregation. SQL Server expects all columns to be in a GROUP BY.
RE: If there are rows where A.a1 is greater than 10, order them and take the top rows's a1 value. If there is no such row, select 'none'.
RE: EDIT: It is a simplified version of the actual code that is going to be used in a subquery. So, I cannot use IF..ELSE statements.
ORDER by a1 value and take TOP 1 == MAX(a1).
Assuming a1 is int orfloat, then the value must be converted to
varchar to handle the 'none' output. LOWER works and requires less typing than CAST or CONVERT.
Code:
SELECT ISNULL(LOWER(MAX(a1)), 'none') FROM A WHERE A.a1 > 10
I'm pretty much out of ideas on how to get this to work.I haven't really used SQL in several years so there's a lot I don't remember.
So here is what I would like to happen:
I return the rows where the Code field from table has the value 1208 AND estnumber = 1187216
Run a count on the selection, if 0 run a subquery
If >0 run a different subquery
I didn't get to the subquery part yet because I can't get this to work correctly at all. Right now I just want it to return text.
Here is the latest attempt, I'm actually using db2 but maybe we can ignore that for now and i'll work that part out later because it says the syntax isnt correct, but other validators disagree (if you dont know anything about db2 just use standard sql when giving advice)
SELECT
count(*) AS t
FROM
table
WHERE
(
ESTNUMBER = 1187216
AND CODE = 1208
)
AND CASE WHEN t = 0 THEN 'it is zero' ELSE 'it is not zero' END;
Are you trying to do something like this?
WITH c AS (
SELECT count(*) AS cnt
FROM table
WHERE ESTNUMBER = 1187216 AND CODE = 1208
)
SELECT s1.*
FROM subquery1 s1
WHERE (SELECT cnt FROM c) = 0
UNION ALL
SELECT s2.*
FROM subquery2 s2
WHERE (SELECT cnt FROM c) > 0;
This assumes that the columns returned by the subqueries are compatible (same number, same types).
There are better ways to write this query (notably using EXISTS and NOT EXISTS), but this conforms directly to how you asked the question.
The string value should come up in the select clause and not in the where filter.
SELECT
count(*) AS t,
(CASE WHEN count(*) = 0 THEN 'it is zero' ELSE 'it is not zero' END) display_str
FROM
table
WHERE
(
ESTNUMBER = 1187216
AND CODE = 1208
)
You're thinking like an imperative programmer, not a declarative one. That is, SQL doesn't have sequential execution: it's all or nothing.
So, here's the start, the bit that works:
SELECT count(*) AS t
FROM table
WHERE ESTNUMBER = 1187216 AND CODE = 1208
Now, to check for the value of count(*), you by now know that WHERE isn't going to work. That's because COUNT is an aggregate function. To look at the result of such of function, you use HAVING.
For your CASE to work, you can move it up into the area that can get count(*) results:
SELECT count(*) AS t
(CASE WHEN count(*) = 0 THEN 'it is zero' ELSE 'it is not zero' END) as msg
FROM table
WHERE ESTNUMBER = 1187216 AND CODE = 1208
Note that "t" is an alias you've given the result of count(*). In most SQL implementations, that alias can't be leveraged in the rest of the statement.
Now, for the either or kind of thing, it would be time to reconsider your approach and what you're really after. You'll probably ultimately have both result sets in your statement and choose how the results are served up.
Something like:
select a.id, a.ct, (case when a.ct=0 then b.amt else c.amt end) as amt
from (select id, count(*) as ct from table1) a
left join (select id, sum(amount) as amt from table2) b on a.id=b.id
left join (select id, sum(amount) as amt from table3) c on a.id=c.id
Hope this helps.
I have a query like:
select nvl(nvl(sum(a.quantity),0)-nvl(cc.quantityCor,0),0)
from RCV_TRANSACTIONS a
LEFT JOIN (select c.shipment_line_id,c.oe_order_line_id,nvl(sum(c.quantity),0) quantityCor
from RCV_TRANSACTIONS c
where c.TRANSACTION_TYPE='CORRECT'
group by c.shipment_line_id,c.oe_order_line_id) cc on (a.shipment_line_id=cc.shipment_line_id and a.shipment_line_id=7085740)
where a.transaction_type='DELIVER'
and a.shipment_line_id=7085740
group by nvl(cc.quantityCor,0);
The query runs OK, but returns no value. I want it to return 0 if there is no quantity found. Where have I gone wrong?
An aggregation query with a GROUP BY returns no rows if all rows are filtered out.
An aggregation query with no GROUP BY always returns one row, even if all rows are filtered out.
So, just remove the GROUP BY. And change the SELECT to:
select coalesce(sum(a.quantity), 0) - coalesce(max(cc.quantityCor), 0)
I may be wrong, but it seems you merely want to subtract CORRECT quantity from DELIVER quantity for shipment 7085740. You don't need a complicated query for that. Especially your GROUP BY clauses make no sense if that is what you are after.
One way to write this query would be:
select
sum(case when transaction_type = 'DELIVER' then quantity else 0 end) -
sum(case when transaction_type = 'CORRECT' then quantity else 0 end) as diff
from rcv_transactions
where shipment_line_id = 7085740;
I had a query like this and was trying to return 'X' when the item is not valid.
SELECT case when segment1 is not null then segment1 else 'X' end
--INTO v_orgValidItem
FROM mtl_system_items_b
WHERE segment1='1676001000'--'Jul-00'--l_item
and organization_id=168;
..but it was returning NULL.
Changed to use aggregation with no group by and now it returns 'X' when the item is not valid.
SELECT case when max(segment1) is not null then max(segment1) else 'X' end valid
--INTO v_orgValidItem
FROM mtl_system_items_b
WHERE segment1='1676001000'--'Jul-00'--l_item
and organization_id=168;--l_ship_to_organization_id_pb;
Here is another example, proving the order of operations really matters.
When there is no match for this quote number, this query returns NULL:
SELECT MAX(NVL(QUOTE_VENDOR_QUOTE_NUMBER,0))
FROM PO_HEADERS_ALL
WHERE QUOTE_VENDOR_QUOTE_NUMBER='foo.bar';
..reversing the order of MAX and NVL makes all the difference. This query returns the NULL value condition:
SELECT NVL(MAX(QUOTE_VENDOR_QUOTE_NUMBER),0)
FROM PO_HEADERS_ALL
WHERE QUOTE_VENDOR_QUOTE_NUMBER='foo.bar';
I have a table that has a processed_timestamp column -- if a record has been processed then that field contains the datetime it was processed, otherwise it is null.
I want to write a query that returns two rows:
NULL xx -- count of records with null timestamps
NOT NULL yy -- count of records with non-null timestamps
Is that possible?
Update: The table is quite large, so efficiency is important. I could just run two queries to calculate each total separately, but I want to avoid hitting the table twice if I can avoid it.
In MySQL you could do something like
SELECT
IF(ISNULL(processed_timestamp), 'NULL', 'NOT NULL') as myfield,
COUNT(*)
FROM mytable
GROUP BY myfield
In T-SQL (MS SQL Server), this works:
SELECT
CASE WHEN Field IS NULL THEN 'NULL' ELSE 'NOT NULL' END FieldContent,
COUNT(*) FieldCount
FROM
TheTable
GROUP BY
CASE WHEN Field IS NULL THEN 'NULL' ELSE 'NOT NULL' END
Oracle:
group by nvl2(field, 'NOT NULL', 'NULL')
Try the following, it's vendor-neutral:
select
'null ' as type,
count(*) as quant
from tbl
where tmstmp is null
union all
select
'not null' as type,
count(*) as quant
from tbl
where tmstmp is not null
After having our local DB2 guru look at this, he concurs: none of the solutions presented to date (including this one) can avoid a full table scan (of the table if timestamp is not indexed, or of the indexotherwise). They all scan every record in the table exactly once.
All the CASE/IF/NVL2() solutions do a null-to-string conversion for each row, introducing unnecessary load on the DBMS. This solution does not have that problem.
Stewart,
Maybe consider this solution. It is (also!) vendor non-specific.
SELECT count([processed_timestamp]) AS notnullrows,
count(*) - count([processed_timestamp]) AS nullrows
FROM table
As for efficiency, this avoids 2x index seeks/table scans/whatever by including the results on one row. If you absolutely require 2 rows in the result, two passes over the set may be unavoidable because of unioning aggregates.
Hope this helps
If it's oracle then you can do:
select decode(field,NULL,'NULL','NOT NULL'), count(*)
from table
group by decode(field,NULL,'NULL','NOT NULL');
I'm sure that other DBs allow for similar trick.
Another MySQL method is to use the CASE operator, which can be generalised to more alternatives than IF():
SELECT CASE WHEN processed_timestamp IS NULL THEN 'NULL'
ELSE 'NOT NULL' END AS a,
COUNT(*) AS n
FROM logs
GROUP BY a
SQL Server (starting with 2012):
SELECT IIF(ISDATE(processed_timestamp) = 0, 'NULL', 'NON NULL'), COUNT(*)
FROM MyTable
GROUP BY ISDATE(processed_timestamp);
Another way in T-sql (sql-server)
select count(case when t.timestamps is null
then 1
else null end) NULLROWS,
count(case when t.timestamps is not null
then 1
else null end) NOTNULLROWS
from myTable t
If your database has an efficient COUNT(*) function for a table, you could COUNT whichever is the smaller number, and subtract.
In Oracle
SELECT COUNT(*), COUNT(TIME_STAMP_COLUMN)
FROM TABLE;
count(*) returns the count of all rows
count(column_name) returns the number of rows which are not NULL, so
SELECT COUNT(*) - COUNT(TIME_STAMP_COLUMN) NUL_COUNT,
COUNT(TIME_STAMP_COLUMN) NON_NUL_COUNT
FROM TABLE
ought to do the job.
If the column is indexed, you might end up with some sort of range scan and avoid actually reading the table.
I personally like Pax's solution, but if you absolutely require only one row returned (as I had recently), In MS SQL Server 2005/2008 you can "stack" the two queries using a CTE
with NullRows (countOf)
AS
(
SELECT count(*)
FORM table
WHERE [processed_timestamp] IS NOT NULL
)
SELECT count(*) AS nulls, countOf
FROM table, NullRows
WHERE [processed_timestamp] IS NULL
GROUP BY countOf
Hope this helps
[T-SQL]:
select [case], count(*) tally
from (
select
case when [processed_timestamp] is null then 'null'
else 'not null'
end [case]
from myTable
) a
And you can add into the case statement whatever other values you'd like to form a partition, e.g. today, yesterday, between noon and 2pm, after 6pm on a Thursday.
Select Sum(Case When processed_timestamp IS NULL
Then 1
Else 0
End) not_processed_count,
Sum(Case When processed_timestamp Is Not NULL
Then 1
Else 0
End) processed_count,
Count(1) total
From table
Edit: didn't read carefully, this one returns a single row.