I am trying to find a way to mimic a USB device being connected without actually having it available. I am trying to develop an additional feature to software that is only fully unlocked when the USB device is connected to the computer. Because the client is unable to provide a demo device for me to use here shortly, I'd like to find a way to emulate or mimic the connectivity of the device so I can finish development. Can I do this with a flash drive perhaps? Find someway to copy the files so that when I insert the flash drive it acts as a plug and play device?
Related
I use webcam-capture(java api) to get video stream from a usb camera, it work fine.
I want read a usb device descriptor(store some private information), i find out that should install WinUSB or libusbk as a driver to the usb devices. and it test ok, read the descriptor success (by libusb_control_transfer api)
the question is:
befor I install WinUSB, the usb camera is a camera device in the windows device management list. the LibUSB work fail, can't open the usb devices, the error number is -5, means entrypoin not find
after I install WinUSB, libUSB api work ok, but the webcam program can't open the usb devices, it is a universal usb device in the windows device management list.
is there some way the webcam work ok, at the same time, i can read the usb device descriptor use libusb or use other something?
i tested on windows 7 and windows 8, have the same problem.
thanks.
Sadly this is not possible because each of your applications needs a different driver. The only way this can work is if you use libusb and build you own capturing api on top which is quite complicated. As long as webcam-capture can not read the data you want to know about the webcam I am afraid this is not possible.
I am currently developing an application that connects to a device via USB but due to project modifications I have to move it to a target device whose only serial communication is via RS-232 DE-9 port.
To communicate with the device I use a proprietary API. Using strace I know that it scans all devices in /dev/bus/usb and after finding the right one the API connects to it.
I wanted to know if I could some how emulate my device in /dev/ttyS0 to an unused usb device in /dev/bus/usb/ to connect to it
I am using MSp430F5418 controller for an embedded device. I want to live broadcast some content to a red5 server from the device (Red5 server is in another computer, not in the embedded device). I have attached a camera and a microphone to my device. Can anybody share some thoughts for doing that?
Red5 is written in Java. I am not aware of a Java implementation that runs on the MSP430 family of processors
The MSP430 running at its top speed of 25MHz just does not have the processing power to handle video and audio processing.
The total RAM available on this processor is only 16kByte. Not really enough for this type of application.
....
This is technical question to check the possibilities of the scenario. Is it possible to use Nokia phone's (Lumia, N9, symbain phone, S40) 3G data connection with a Android tablet pc?
Or any way to use phone's 3G data connection with tablet pc?
I have a unlimited data connection for my phone. But I don't use it that much. So I'm planning to use it with the tablet pc.
yep its possible easily if :
1. your tab is rooted
2. your tab supports usb host mode or otg mode (you could either check it on net or download usb host diagnostics) (just click start diagnostic)
procedure
Downoad ppp widget
configure your apn according to pc suite settings
then plug in your phone via usb on nokia pc suite mode
now wait 10s and click connect
you are now done
(pls switch your wifi off as ppp widget creates virual wifi for your tab)
any inquiries contsct rld0989#gmail.com (don't be rest less I only check my gmail once a day)
Yes, it's possible to use your phone as a modem, connected to the tablet via a USB cable, as long as you have
(1) an APN from your network operator to make a data connection via their network, and
(2) suitable device drivers for the phone. On Windows, smartphones are plug and play, but I don't have any experience using them with Android.
On the tablet, you also need some software to control the modem - something like the Mobile Broadband Connect 3.0 application listed on here
You can write a simple connection app yourself using the Android Telephony Manager.
Alternatively, you could connect manually, using AT commands with a suitable AT command program (in Windows, it would be Hyperterminal). This thread describes a possible equivalent for Android.
Standard AT commands to make a data connection are described in the 3gpp TS27.007 specification.
There are a lot of variations for different manufacturers, but making a simple connect should be possible using the standard commands.
The rest of my team will make for my application a simple non-standard USB microphone, but until they finish it I will have to emulate it, for integration testing purposes.
Is there any risk in a physical loopback? Yes there is
Will a physical loopback work? Only with a USB bridge
There is any way to create a logical loopback? (MSDN has something about this)
There is any general purpose USB emulator software?
In case there is many options available I'd rather work it .NET/Matlab/Python solutions.
Edit: Proof of concept here
I strongly recommend this project, USB IP. It is a way of connecting USB devices over the network. There is a Windows client.
What this means is, you install the client on your Windows computer.
This device then expects to talk to a USB device connected to a Linux computer, the server:
What you now do, is either create a fake device driver for Linux, that looks like is connected to a physical USB device, but in reality is just logic pretending to be your USB device. There are tutorials for writing USB drivers for Linux. Or you create your own stub driver for the Device Control Manager (see picture above). This stub driver could run on Windows or Linux, it wouldn't matter. It could even run on the same Windows machine which is the USB client.
The DSF USB Loopback Device mentioned in the question itself, would be the same kind of solution as a stub driver for the Device Control Manager, but taking Linux out of the picture altogether.
You can write virtual USB device using QEMU.
You can duplicate already existing device, like the dev-serial.c found in this QEMU repository and change it for your needs.
After you write and compile your USB device you can simply attach it to your VM using the QEMU command line interface.