I want to check whether a possibly mandatory field is filled in using selenium. I would very much prefer to do this using the IDE rather than exporting to code.
To be more specific, I want to make sure that a post code field is filled in if the value of the country drop down list is 'United Kingdom'. The post code field can be left blank if the drop down list is set to anything else.
If the consensus is that I have to export and do the test in code, then I will, but I would be a lot happier if I could sort this out just through the IDE.
Unfortunately, Selenium-IDE does not offer any flow control functionality by default. However, the Flow Control plugin introduces a few new commands - while, gotoIf, label and the ...andWait variants. Using these, you should be able to check the currently selected value in the dropdown menu, and jump past a verify command if the value is not "United Kingdom".
Fair warning; it's not the easiest thing in the world to work with. For anything beyond very basic flow control, you'd probably be better off exporting to code anyway. But, it's an option for when you really want to push the IDE!
Related
SUMMARY:
I need the most efficient workflow to individually edit over 200 files, and have them automatically disappear from the search results as they are updated.
DETAILS:
I am in the process of adding logging throughout a legacy system, and need to update over 200 files, each with their own custom code. I need to edit them one by one, and would like for the updated files to automatically disappear from my working search results after I have completed each one. The idea is to know how many and which ones still need to be updated as I slowly work through them all.
I already had to do something similar a few months ago, but on a much smaller scale, and I used an old-school HACK to do it. I did a search and replace for my keyword, and intentionally misspelled it. I then used the misspelled keyword for my search, and corrected it when editing each file, hence automatically removing it from the list. It "works", but is obviously a TOTAL HACK.
I recently started using IntelliJ IDEA, and am not yet familiar with the more advanced features like Find in File Scopes, Search Structurally, Search Templates, etc., but I am sure there HAS to be a "correct" way to do this in IntelliJ, and I just don't know how.
I am currently using "Find in Files" to work through the list, and recently found "All Changed Files" in the Scope list, which is actually the EXACT OPPOSITE of what I need. Is there a way to show "All UNCHANGED Files"??? That would work PERFECTLY in a pinch! But really, I would rather learn the CORRECT way to do this in IntelliJ.
Thanks!
I don't see anything in the right-click menu that will give me this. I always have to write it manually
Are you asking about button#checkout.button-1.checkout-button? If so, I'm not aware of a way to copy-paste this, or a name for it, but it is constructed with the format
htmlTag#idOfElement.class.with.periods.instead.of.spaces
It is pretty commonly a unique selector for the element in question.
Intellij has a really neat feature, that lets me seamlessly extract a block of code into its own method. I can then give this method a nice, descriptive name and move on with life.
However, intellij also tries to find other blocks of code that are similar, and then tries to perusade me that I should also refactor them too, to use this new method its made. And then, when I hit the oddly-named "cancel" button (which implies the whole operation is cancelled, but it's not, it just stops asking about any remaining blocks), it leaves me looking at whatever the block of code it last asked me about.
I really don't like this feature. Here's why: If I'm say comparing two ints - the naming of the code block will depend on the context of those two ints, but intellij will find any comparison between two ints anywhere in that file, and then insist that this is also a candidate for extraction.
Most times it is not, and to make it worse, when I ask intellij to stop it, in a fit of pique, leaves me wherever the last comparison was, so now I have to navigate back to where I was working.
How do I tell intellij just to extract exactly what I selected, and do nothing else?
Please follow/vote/comment the issue created for this usability problem at YouTrack:
https://youtrack.jetbrains.com/issue/IDEA-233201
A few years back i worked in a company where i could press CTRL+T and a TODO-comment was generated - say my ID to be identified by other developers was xy45 then the generated comment was:
//TODO (xy45):
Is something available from within Intellij 14 Ultimate or did they write their own plugin for it?
What i tried: Webreserach, Jetbrais documentations - it looks like its not possible out of the box (i however ask before i write a plugin for it) or masked by the various search results regarding the TODO-view (due to bad research skills of mine).
There is no built-in feature in IntelliJ IDEA to generate such comments, so it looks like they did write their own plugin.
Found something that works quite similar but is not boundable to a shortcut:
File -> Settings -> Live Templates
I guess the picture says enoth to allow customization (consult the Jetbrains documentation for more possibilities). E.g. browse to the Live Template section within the settings, add a new Live Template (small green cross, upper right corner in the above picture) and set the context where this Live Template is applicable.
Note: Once you defined the Live Template to be applicable within Java (...Change in the above image where the red exclamation marks are shown) context you can just type "t", "todo" and hit CTRL+Space (or the shortcut you defined for code completion).
I suggest to reconsider using that practice at all. Generally you should not include redundant information which is easily and more reliably accessible through your Version Control System (easily available in Idea directly in editor using Annotate feature). It is similiar to not using javadoc tag #author as the information provided with it is often outdated inaccurate and redundant. Additionaly, I don´t think author of TODO is that much valuable information. Person who will solve the issue will often be completly different person and the TODO should be well documented and descriptive anyway. When you find your own old TODO, which is poorly documented, you often don't remember all the required information even if you were the author.
However, instead of adding author's name, a good practice is to create a task in you issue management system and add identifier of this task to the description of the todo. This way you have all your todos in evidence at one place, you can add additional information to the task, track progress, assign it etc. My experience is that if you don´t use this, todos tend to stay in the code forever and after some time no one remembers clearly the details of the problem. Additionaly, author mentioned in the todo is often already gone working for a different company.
Annotated TODO with issue ID
Am trying to capture a element (delete button in gmail) which has variable xpath.
The xpath is something like this-
//*[#id=':rr']/div/div[4]/div[1]/div[1]/div[1]/div/div/div[2]/div[3]
can somebody kindly help?
No, this is where the IDE falls behind and it's for good reason. It, along with other 'XPath-ified' (e.g using the 'XPath' right-click option in Firebug) tools will only take a guess at where something is located in the DOM.
In that, I mean it's going to walk down the tree and see where it is, in relation to the other elements, i.e it'll walk down one set of tr elements, and know there are 7 of them, therefore it'll know that the first one can be accessed using [1], then the next one can be accessed using [2] etc etc...
It doesn't, or really can't, know what is unique enough for you to use. That's why it's down to you to figure it out.
As for Gmail specifically, I would suggest you either fall back to Gmail's basic mode - so the markup will be easier to deal with or stop completely and use a particular set of API's in whatever language you are using to deal direct with the mailboxes in that account.
Though, if you do this, you'll need to dump the IDE altogether - essentially this is beyond the IDE and is a logical thing you need to decide yourself. The IDE is not designed for this.
Though, a tip would be see what's near the delete button. Is there a static element, that has the same attributes all the time, near it? You can get that element, and walk through to the DOM to your 'delete button'.