I want to build DCMTK in Visual Studio 2010.
I followed the advice here enter link description here, as the image shows.
And I still get the same error. Any ideas?
Run the following script before running cmake.
>vcvars32 (to set some system vars, C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\bin\vcvars32.bat)
A similar problem has been reported here
The solution is:
First, check if you have .NET 4.5 on your system. If you do, that is very likely causing the problem. Try either upgrading to VS2010 SP1 or downgrade .NET to 4.0
CAUSES:
This error appear because you have installed Visual C++ 2012 after you have actually installed Visual C++ 2010 in your system; another cause is because .net Framework 4.5 replace .net Framework 4.0; .net Framework corrupted files;
HOW TO SOLVE:
Uninstall .NET Framework 4.5 from your system; then download .NET Framework 4.0 and install it; this should fix your problem;
Related
Trying to compile Python Django project but receiving build error:
C:\Program Files\Microsoft Visual Studio\2022\Community\MSBuild\Current\Bin\amd64\Microsoft.Common.CurrentVersion.targets(1217,5): error MSB3644: The reference assemblies for .NETFramework,Version=v4.0 were not found. To resolve this, install the Developer Pack (SDK/Targeting Pack) for this framework version or retarget your application. You can download .NET Framework Developer Packs at https://aka.ms/msbuild/developerpacks
Done building project "myFinancialTracker.pyproj" -- FAILED.
How can I resolve?
I also got the same error as you, this is because VS 2022 doesn't come with
.net framework 4.0 option during installation, to overcome this problem I install VS 2019 and enable the usage of .net-framework 4.0 during installation. After the installation, I tried to run my project again using VS2022 and the error goes away.
I tried to download and install .net-framework 4.0 separately but Microsoft doesn't allow me to do so, to overcome this, I install VS2019 instead.
Using the latest Visual Studio 2019 version, a brand new project will not build:
fatal error LNK1104: cannot open file 'MSCOREE.lib'
I have tried to re-install Visual Studio but that didn't change anything unfortunately.
These components have been selected by the installer but apparently it's not enough:
MSVC v142 - VS 2019 C++ x64/x86 build tools (v14.24)
Windows 10 SDK (10.0.18362.0)
C++/CLI support for v142 build tools (14.24)
Question:
Are there any tricks to get CLR Class Library (.NET Framework) projects to build ?
Here is the solution:
Apparently, no matter what framework version you will target, the $(NETFXKitsDir)Lib\um\x86 macro will always point to C:\Program Files (x86)\Windows Kits\NETFXSDK\4.7.2\lib\um\x86.
Now here's the problem, even though you install 4.7.2 SDK in Visual Studio Installer, this file is nowhere to be seen.
But if you download .NET Framework 4.7.2 Developer Pack Offline Installer and press the Repair button, it gets correctly installed and a brand new project will build succesfully.
Alternatively:
Re-installing VS also fixes the issue ...
On Windows 8 RTM and just installed Vs2012 Ultimate RTM, I'm unable to create a .net 4.5 project nor a .net 4 or 4.5 ASP.NET MVC project. I've done a repair of VS2012, which did not fix it. Is there something obvious I'm doing wrong?
I also had the same problem..
Doing the following procedure solved it.
Copy the folder \packages\WPT from the visual studio 2012 installer CD to your desktop.
Uninstall the following in this order..
aspnetmvc4vs11tools.msi
aspnetmvc4.msi
aspnetmvc3vs11tools.msi
aspnetmvc3.msi
Then install these in this order.
aspnetmvc3.msi
aspnetmvc3vs11tools.msi
aspnetmvc4.msi
aspnetmvc4vs11tools.msi
Trying to repair didn't fix the problem. You have to remove and install these..
Hope this will help...
Your install is probably corrupted. VS 2012 needs .net 4.5 to run, so something has gone wrong if it's not available.
I would try uninstalling and reinstalling. It's brute force but it generally works.
You probably do not have the Windows 8.1 SDK installed. Visual Studio 2012, nor its updates, link the .NET Framwork 4.5 libraries for development.
Windows 8.1 SDK
You don't have to install the full SDK if you are just looking for the option to build web apps, just the .NET Framework 4.5.1 option in the installer. The full install is about 1.1GB, but just the .NET installer is only 72MB.
For those reading this that have not updated their copy of Visual Studio 2012, make sure you also have these installed:
Visual Studio 2012 Update 4
ASP.NET and Web Tools 2013.1 for Visual Studio 2012
Hope this helps!
Change .net framework version to 4.5
I just installed VS 2012 Ultimate RTM on Windows 8 Pro RTM and tried to open a solution containing several projects (class libraries and WinForms) targeting .NET 4.0.
When the solution is loaded, VS prompts that .NET 4.0 isn't supported. It gives me the chance to update my projects to 4.5 (and promises that I could change the target later) or install a "Multi targeting pack" for 4.0 from this page.
I decided to update my projects to 4.5 because I had no luck installing the offered Multi targeting pack (errors see below).
Unfortunately, VS does not show 4.0 as a target by default (when changing the target for an updated project), but redirects me to the page where I can download the Multi targeting pack.
So far so good, but I wasn't able to install any of the offered downloads (neither runtime nor targeting pack) again.
The error message says in case of .NET Framework 4.0.3 Targeting Pack:
Setup has detected that this computer does not meet the requirements to install this software. The following blocking issues must be resolved before you can install KB2600213 software package.
Installation Requirements:
Microsoft .NET Framework 4 Multi-Targeting Pack was not found. Please repair your installation for Microsoft Visual Studio 2010 in order to get this update.
Strange enough since I have no VS2010 installed.
.NET Framework 4.0.3 Runtime Installation stops with the following error:
KB2600211 does not apply, or is blocked by another condition on your computer.
I've checked that .NET 4.0 is installed (using the .NET Installation verification tool), I've tried to repair VS2012 but nothing let me target .NET 4 and the Event log does not contain any related reports. Any suggestions or hints (besides going back to Win7/VS2010)?
I'm honestly not sure what's going on. I have VS 2012 Ultimate RTM and all versions of .NET are supported.
I'm almost positive I never installed any .NET frameworks manually, though I did install Visual Studio 2010 Express for Windows Phone from http://create.msdn.com.
I am trying my hands on source code of WIX 3.6 to debug something as well as learn something.
On executing make.bat (present in root folder of WIX source) file, first i got NAnt not found. So I downloaded NAnt and updated make.bat file. On executing the file again I am getting this error
NAnt 0.91 (Build 0.91.3881.0; alpha2; 8/17/2010)
Copyright (C) 2001-2010 Gerry Shaw
http://nant.sourceforge.net
Buildfile: file:///D:/wix36-sources/wix.build
Target framework: Microsoft .NET Framework 4.0
Target(s) specified: inc
[readregistry] Registry Path Not Found! - key='Software\Microsoft\VisualStudio\VSIP\10.0\';hive='Microsoft.Win32.RegistryHive[]';
[readregistry] Registry Path Not Found! - key='Software\Microsoft\VisualStudio\VSIP\10.0\';hive='Microsoft.Win32.RegistryHive[]';
[property] Target framework changed to "Microsoft .NET Framework 2.0".
[property] Read-only property "dir.hhw" cannot be overwritten.
[property] Read-only property "hhw-found" cannot be overwritten.
BUILD FAILED - 2 non-fatal error(s), 2 warning(s)
D:\wix36-sources\wix.build(65,4):
Build file 'D:\wix36-sources\test\wixtests.build' does not exist.
I have .Net framework 4.0 installed on my local. Also I searched through registry for the registry key mentioned in the error and didn't found. Am I using right version of NAnt?
Do you have all of the prerequisites as described in the documentation?
In order to fully build WiX, you must have the following Frameworks and SDKs installed:
NAnt (0.90 or later)
The following components from the Windows SDK for Windows Server 2008 and .NET Framework 3.5, Visual Studio 2008, Microsoft Windows 7 SDK, and/or Visual Studio 2010:
x86 and x64 compilers, headers and libraries
IA64 headers and libraries are optional, but they are necessary for IA64 custom action support
If you want to be able to build optimized IA64 binaries, you'll need both the Windows SDK for Windows Server 2008 and .NET Framework 3.5 SDK AND Visual Studio 2008 installed; or the Microsoft Windows 7 SDK AND Visual Studio 2010.
HTML Help SDK 1.4 or higher [installed to Program Files or Program Files (x86)]
The missing registry key seems to be related to the VisualStudio SDK - you don't need this for basic WiX.
If you have all of the prerequisites, try passing the -debug switch to Nant for more detailed debugging output.
To solve this problem:
[readregistry] Registry Path Not Found! - key='Software\Microsoft\VisualStudio\VSIP\10.0\';hive='Microsoft.Win32.RegistryHive[]';
[readregistry] Registry Path Not Found! - key='Software\Microsoft\VisualStudio\VSIP\10.0\';hive='Microsoft.Win32.RegistryHive[]';
If you used Visual Studio 2010 SP1 you need Visual Studio 2010 SP1 SDK