I have an application that uses Verilog and C (SystemC to be precise). I wanted to see if there was a way to have a common header file that can be used across the entire application ?
Such that:
#define FOO 4
doesnt have to be repeated in another verilog file
`define FOO 4
Some simulators will let you define macros from the command line during compile and pass the definition to SystemC and Verilog. Check with your simulators manual, it should look something like +define+FOO=4 of -defineall FOO=4 if it is supported.
The other approach is to create a script to that generates a converted header for you. This way you only maintain one file. This approach is better if you also want to share struct, typedef, and enum between SystemVerilog and SystemC.
I think they are different languages. It is hard to make common file to be used directly. But you can have a common source and use script to generate the header files for you.
Related
Can i use something like #ifdef in FLEX and/or BISON source code? I would want to control what options my scanner recognizes depending on different compilation parameters.
Also, is there a way to use multiple sources at the same time? (for example scanner1.lex and scanner2.lex to be combined into lex.yy.c)
Neither flex nor bison come with a preprocessor, and it would be unwise to use the C preprocessor, since your source files are likely to contain C preprocessor directives intended to be passed through to the generated code.
But nothing stops you from writing your own preprocessor, or using a macro language like m4. (m4 must be available because both flex and bison depend on it.)
I am learning Objective-C, but can't understand one thing with the frameworks. Each framework in objective-C contains header files which contain only #interface part. That means that header files only declare difference methods and do not implement them. Is this implementation part hidden in the frameworks or something, because I can't get how it works.
Thank you in advance for your answers!
Is this implementation part hidden in the frameworks or something
Well, sort of. It's compiled (the actual source code is not present neither in the SDK nor in the OS) and only the binary executable code is contained within the dynamic library that resides inside the framework.
It is still possible to use them (i. e. link against them), obviously (see this for an explanation), but you cannot edit the source code. In theory, you could try binpatching them (i. e. disassembling, analyzing and editing the executable file using a hex editor or something), but that's neither recommended (you can screw up your entire system if you do one slight thing wrong), nor easy.
I would like to add a new flag to an elf file. This flag should then be available
to the kernel in the process descriptor. My first idea was to use libelf, but unfortunately
there seems to be a bug with it on Ubuntu. Elfedit would have probably been a nice tool but I have not found a version for Linux, in particular Ubuntu.
So, I am wondering if anyone can suggest to me if there is any other useful tool out there
to add a custom flag to an elf file?
Many thanks for your help!
People who are able to modify the kernel to take advantage of the new flag probably wouldn't be asking how to add the flag to the ELF libraries.
So, how do you plan to have the kernel use this new flag? What is the purpose of the flag?
Since you are adding to the standard libelf, can't you fix the bug for Ubuntu and let them know that you've done so (make the fix available to them - though they'll probably need to relay it back up the chain).
Please look at ELFIO library. It contains WriteObj and Writer examples. By using the library, you will be able to create and/or modify ELF binary files.
(although old question but for reference I am writing answer based on my own experience)
I suggest to read elf file in memory struct, make changes to flags and load process memory with your in-memory struct. This method will need less efford as compare to bug correction. To start, check file elf.c for elf, program header, section headers struct. you can read file header in your struct which should have three struct members for elf, program, section. start read in your struct from elf header. then read program header on offset given in elf header (iteratively for all program headers). In same way you can read all sections through section headers.
encapsulating 3 headers struct in your own struct also give you oppertunity to have extra needed data in your other struct member.
To support multiple platforms in C/C++, one would use the preprocessor to enable conditional compiles. E.g.,
#ifdef _WIN32
#include <windows.h>
#endif
How can you do this in Ada? Does Ada have a preprocessor?
The answer to your question is no, Ada does not have a pre-processor that is built into the language. That means each compiler may or may not have one and there is not "uniform" syntax for pre-processing and things like conditional compilation. This was intentional: it's considered "harmful" to the Ada ethos.
There are almost always ways around a lack of a preprocessor but often times the solution can be a little cumbersome. For example, you can declare the platform specific functions as 'separate' and then use build-tools to compile the correct one (either a project system, using pragma body replacement, or a very simple directory system... put all the windows files in /windows/ and all the linux files in /linux/ and include the appropriate directory for the platform).
All that being said, GNAT realized that sometimes you need a preprocessor and has created gnatprep. It should work regardless of the compiler (but you will need to insert it into your build process). Similarly, for simple things (like conditional compilation) you can probably just use the c pre-processor or even roll your own very simple one.
AdaCore provides the gnatprep preprocessor, which is specialized for Ada. They state that gnatprep "does not depend on any special GNAT features", so it sounds as though it should work with non-GNAT Ada compilers. Their User Guide also provides some conditional compilation advice.
I have been on a project where m4 was used as well, with the Ada spec and body files suffixed as ".m4s" and ".m4b", respectively.
My preference is really to avoid preprocessing altogether, and just use specialized bodies, setting up CM and the build process to manage them.
No but the CPP preprocessor or m4 can be called on any file on the command line or using a building tool like make or ant. I suggest calling your .ada file something else. I have done this for some time on java files. I call the java file .m4 and use a make rule to create the .java and then build it in the normal way.
I hope that helps.
Yes, it has.
If you are using GNAT compiler, you can use gnatprep for doing the preprocessing, or if you use GNAT Programming Studio you can configure your project file to define some conditional compilation switches like
#if SOMESWITCH then
-- Your code here is executed only if the switch SOMESWITCH is active in your build configuration
#end if;
In this case you can use gnatmake or gprbuild so you don't have to run gnatprep by hand.
That's very useful, for example, when you need to compile the same code for several different OS's using even different cross-compilers.
Some old Ada1983-era compilers have a package called a.app that utilized a #-prefixed subset of Ada (interpreted at build-time) as a preprocessing language for generating Ada (to be then translated to machine code at compile-time). Rational's Verdix Ada Development System (VADS) appears to be the progenitor of a.app among several Ada compilers. Sun Microsystems, for example, derived the Ada SPARCompiler from VADS and thus also had a.app. This is not unlike the use of PL/I as the preprocessor of PL/I, which IBM did.
Chapter 2 is some documentation of what a.app looks like: http://dlc.sun.com/pdf/802-3641/802-3641.pdf
No, it does not.
If you really want one, there are ways to get one (Use C's, use a stand-alone one, etc.) However I'd argue against it. It was a purposeful design decision to not have one. The whole idea of a preprocessor is very un-Ada.
Most of what C's preprocessor is used for can be accomplished in Ada in other more reliable ways. The only major exception is in making minor changes to a source file for cross-platform support. Given how much this gets abused in a typical cross-platform C program, I'm still happy there's no support for it in Ada. Very few C/C++ developers can control themselves enough to keep the changes "minor". The result may work, but is often nearly impossible for a human to read.
The typical Ada way to accomplish this would be to put the different code in different files and use your build system to somehow choose between them at compile time. Make is plenty powerful enough to help you do this.
I'm producing a hex file to run on an ARM processor which I want to keep below 32K. It's currently a lot larger than that and I wondered if someone might have some advice on what's the best approach to slim it down?
Here's what I've done so far
So I've run 'size' on it to determine how big the hex file is.
Then 'size' again to see how big each of the object files are that link to create the hex files. It seems the majority of the size comes from external libraries.
Then I used 'readelf' to see which functions take up the most memory.
I searched through the code to see if I could eliminate calls to those functions.
Here's where I get stuck, there's some functions which I don't call directly (e.g. _vfprintf) and I can't find what calls it so I can remove the call (as I think I don't need it).
So what are the next steps?
Response to answers:
As I can see there are functions being called which take up a lot of memory. I cannot however find what is calling it.
I want to omit those functions (if possible) but I can't find what's calling them! Could be called from any number of library functions I guess.
The linker is working as desired, I think, it only includes the relevant library files. How do you know if only the relevant functions are being included? Can you set a flag or something for that?
I'm using GCC
General list:
Make sure that you have the compiler and linker debug options disabled
Compile and link with all size options turned on (-Os in gcc)
Run strip on the executable
Generate a map file and check your function sizes. You can either get your linker to generate your map file (-M when using ld), or you can use objdump on the final executable (note that this will only work on an unstripped executable!) This won't actually fix the problem, but it will let you know of the worst offenders.
Use nm to investigate the symbols that are called from each of your object files. This should help in finding who's calling functions that you don't want called.
In the original question was a sub-question about including only relevant functions. gcc will include all functions within every object file that is used. To put that another way, if you have an object file that contains 10 functions, all 10 functions are included in your executable even if one 1 is actually called.
The standard libraries (eg. libc) will split functions into many separate object files, which are then archived. The executable is then linked against the archive.
By splitting into many object files the linker is able to include only the functions that are actually called. (this assumes that you're statically linking)
There is no reason why you can't do the same trick. Of course, you could argue that if the functions aren't called the you can probably remove them yourself.
If you're statically linking against other libraries you can run the tools listed above over them too to make sure that they're following similar rules.
Another optimization that might save you work is -ffunction-sections, -Wl,--gc-sections, assuming you're using GCC. A good toolchain will not need to be told that, though.
Explanation: GNU ld links sections, and GCC emits one section per translation unit unless you tell it otherwise. But in C++, the nodes in the dependecy graph are objects and functions.
On deeply embedded projects I always try to avoid using any standard library functions. Even simple functions like "strtol()" blow up the binary size. If possible just simply avoid those calls.
In most deeply embedded projects you don't need a versatile "printf()" or dynamic memory allocation (many controllers have 32kb or less RAM).
Instead of just using "printf()" I use a very simple custom "printf()", this function can only print numbers in hexadecimal or decimal format not more. Most data structures are preallocated at compile time.
Andrew EdgeCombe has a great list, but if you really want to scrape every last byte, sstrip is a good tool that is missing from the list and and can shave off a few more kB.
For example, when run on strip itself, it can shave off ~2kB.
From an old README (see the comments at the top of this indirect source file):
sstrip is a small utility that removes the contents at the end of an
ELF file that are not part of the program's memory image.
Most ELF executables are built with both a program header table and a
section header table. However, only the former is required in order
for the OS to load, link and execute a program. sstrip attempts to
extract the ELF header, the program header table, and its contents,
leaving everything else in the bit bucket. It can only remove parts of
the file that occur at the end, after the parts to be saved. However,
this almost always includes the section header table, and occasionally
a few random sections that are not used when running a program.
Note that due to some of the information that it removes, a sstrip'd executable is rumoured to have issues with some tools. This is discussed more in the comments of the source.
Also... for an entertaining/crazy read on how to make the smallest possible executable, this article is worth a read.
Just to double-check and document for future reference, but do you use Thumb instructions? They're 16 bit versions of the normal instructions. Sometimes you might need 2 16 bit instructions, so it won't save 50% in code space.
A decent linker should take just the functions needed. However, you might need compiler & linke settings to package functions for individual linking.
Ok so in the end I just reduced the project to it's simplest form, then slowly added files one by one until the function that I wanted to remove appeared in the 'readelf' file. Then when I had the file I commented everything out and slowly add things back in until the function popped up again. So in the end I found out what called it and removed all those calls...Now it works as desired...sweet!
Must be a better way to do it though.
To answer this specific need:
•I want to omit those functions (if possible) but I can't find what's
calling them!! Could be called from any number of library functions I
guess.
If you want to analyze your code base to see who calls what, by whom a given function is being called and things like that, there is a great tool out there called "Understand C" provided by SciTools.
https://scitools.com/
I have used it very often in the past to perform static code analysis. It can really help to determine library dependency tree. It allows to easily browse up and down the calling tree among other things.
They provide a limited time evaluation, then you must purchase a license.
You could look at something like executable compression.