Environment
XAMPP 7.2.4 installed on Windows 10
Apache running on ports 80 and 443
Configuration
C:\Windows\System32\drivers\etc\hosts:
127.0.0.1 www.test.local test.local
C:\xampp\apache\conf\httpd.conf:
DocumentRoot "D:/htdocs"
<Directory "D:/htdocs">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Require all granted
</Directory>
C:\xampp\apache\conf\extra\httpd-vhosts.conf:
<VirtualHost *:80>
DocumentRoot D:/htdocs
ServerName localhost
<Directory "D:/htdocs">
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot D:/htdocs
ServerName test.local
<Directory "D:/htdocs">
Allow from all
</Directory>
</VirtualHost>
The problem
When I start Apache and I access to localhost is all right. The problem comes when I try to reach test.local: the browser returns a This site can’t be reached message. It's like XAMPP ignores the custom domain vhosts defined into httpd-vhost.conf file. The same message is displayed with the server off.
This site can’t be reached
The webpage at http://test.local/ might be temporarily down or it may have moved permanently to a new web address.
ERR_ADDRESS_INVALID
A few days ago the setup was working and the only changes that I made was the new software installation. I mean, no changes in Apache config files.
If all your stack were working correctly before, don't be like me and don't forget to check if some browser extension is blocking your local traffic, like some extension related with an antivirus system.
In my case it was the Kaspersky Protection extension. When something goes wrong, it shows the following graphic.
C:\Windows\System32\drivers\etc
127.0.0.1 test.local
C:\xampp\apache\conf\extra\httpd-vhosts.conf:
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host2.example.com
DocumentRoot "C:/wamp64/www/test"
ServerName test.local
<Directory "C:/wamp64/www/hydroboost/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
Have you updated your C:\Windows\System32\drivers\etc\hosts file with a mapping like this this?
add this line to the end of the hosts file
127.0.0.1 test.local
the localhost domain works without this mapping, because the OS already recognizes "localhost" as a built in alias for the loopback IP address
(this suggestion is assuming that you are running and testing on the same local machine)
To be perfectly honest, I'm not even sure if this is doable...
I've configured my vhosts file in /etc/apache2/sites-enabled which you can see here:
<VirtualHost 159.203.171.140:8080>
ServerAdmin webmaster#localhost
ServerName 159.203.171.140:8080
DocumentRoot "/home/wiki/public_html"
DirectoryIndex index.php index.html
<Directory "/home/wiki/public_html">
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
Allow from all
Require all granted
</Directory>
ErrorLog ${APACHE_LOG_DIR}/wiki_error.log
CustomLog ${APACHE_LOG_DIR}/wiki_access.log combined
</VirtualHost>
for a digitalocean droplet given at the IP listed in the above hosts file. This droplet has absolutely nothing on it except for the wiki user in /home/ plus the required php, mysql/mariadb, apache stuff.
What I want to be able to do is to go to 159.203.171.140:8080 and see my site without having to purchase a useless domain name.
I'd really appreciate some help with this one.
If you have only one website on the droplet, then you don't need to set up a virtual host. You can use the 000-default.conf, no need for a2ensite.
You do not need the ServerName, which won't work with the IP as a name, you also don't need the IP address in the VirtualHost directive.
So, instead of this:
<VirtualHost 159.203.171.140:8080>
ServerAdmin webmaster#localhost
ServerName 159.203.171.140:8080
DocumentRoot "/home/wiki/public_html"
...
You can use this in your 000-default.conf file
<VirtualHost *:8080>
DocumentRoot "/home/wiki/public_html"
...
The rest of the directive stays as you have it.
Also, one note, if you are using port 8080, then you need go to /etc/apache2/ports.conf and set the Listen to 8080 (restart Apache after doing this).
I want to host multiple websites on my computer. I'm using Windows with WAMP server. I already have domains and know how to map them to ip.
I have already edited httpd.conf file to allow virtual hosts.
My httpd-vhosts file looks like this,
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www"
ServerName localhost
ServerAlias localhost
<Directory "C:/wamp64/www">
AllowOverride All
Require local
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/testcase"
ServerName test.mydomain.com
<Directory "C:/wamp64/www/testcase">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
Require all granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/test2"
ServerName test2.mydomain.com
<Directory "C:/wamp64/www/test2">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
Require all granted
</Directory>
</VirtualHost>
The problem is that both my domains open only the first site in this VirtualHost tag.
Example: In this case, both my domains will open the WAMP server configuration page. If I were to move the "testcase" tag above the other, both my domains will open the "testcase" page.
Update:
My subdomains show corresponding pages successfully when I open them on the server. But when I open subdomains on another machine, they open the first entry in the VH.
Update 2: Okay, so this is just out of my understanding now. I thought may be WAMP is not my cup of tea. So I installed XAMPP and made changes to the VH configuration and still ended up with same problem. So I then got rid of XAMPP too and installed WAMPDeveloper Pro. What could go wrong when the software sets up all the configuration files for you, right? But to my surprise, I still have the same problem. The websites work fine when I open them (using actual domain name) on the server itself, but when I open them on machine outside network the first VH entry open for all the domains I open.
Can anyone please help me with this?
Thanks!
Using both Apache2.2 and Apache2.4 syntax gets Apache a litle confused.
So as I assume you are running Apache 2.4 change the VH defs to this
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/testcase"
ServerName test.mydomain.com
<Directory "C:/wamp64/www/testcase">
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/test2"
ServerName test2.mydomain.com
<Directory "C:/wamp64/www/test2">
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
Why Apache opens the first site i.e. localhost in this case.
If Apache cannot make sense of a VH def, it ignores it and default to loading the first Virtual Host that was correctly defined in the httpd-vhosts.conf file.
Of course you will also need to amend your c:\windows\system32\driverrs\etc\hosts file to include these domain names
127.0.0.1 localhost
127.0.0.1 test.mydomain.com
127.0.0.1 test2.mydomain.com
::1 localhost
::1 test.mydomain.com
::1 test2.mydomain.com
I am attempting to host a website onto the domain that I purchased from google domains (seanpatnode.com), I have tried several tutorials but I keep getting the same results. Any help would be greatly appreciated! I will give as much information as possible. I am using XAMPP 2.4 as the web server.
Here are relevant lines from my httpd.conf file: (please inform me if I left anything important out.)
ServerRoot "C:/xampp/apache"
Listen 80
ServerName localhost:80
<Directory />
AllowOverride none
Require all denied
</Directory>
# DocumentRoot "C:/xampp/htdocs"
<Directory "C:/xampp/htdocs">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Require all granted
</Directory>
These are the relevant lines from my httpd-vhosts.conf:
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs"
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/PhpProject"
ServerName seanpatnode.com
ServerAlias www.seanpatnode.com
<Directory "c:/xampp/htdocs/PhpProject">
AllowOverride All
Require all Granted
</Directory>
</VirtualHost>
These are relevant lines from my hosts file located in: C:\WINDOWS\System32\drivers\etc
127.0.0.1 localhost
127.0.0.1 www.seanpatnode.com
I can see the webpage when I open www.seanpatnode.com from my own computer.
However when I try to open it from another computer it says:
This webpage is not available
The server at www.seanpatnode.com can't
be found, because the DNS lookup failed. DNS is the network service
that translates a website's name to its Internet address. This error
is most often caused by having no connection to the Internet or a
misconfigured network. It can also be caused by an unresponsive DNS
server or a firewall preventing Google Chrome from accessing the
network.
Again, seanpatnode.com is the domain that I purchased from Google Domains. Any help would be greatly appreciated. Thank you.
It's not enough to purchase the domain name, you must also actually put the correct data into it. Specifically in your case, the domain name www.seanpatnode.com does not spring into being by itself, you have to create it and make it point at the IP address of your web server.
I'm working with XAMPP on Mac OS X.
I'm trying to run a Symfony website properly for a client, and I really don't know Symfony (yet). I just want to install and launch it.
I've changed my /etc/hosts file this way:
127.0.0.1 www.mysite.local
And the httpd.conf file this way:
<VirtualHost *:80>
ServerName www.mysite.local
DocumentRoot /Applications/MAMP/htdocs/mysite/web
DirectoryIndex index.php
<Directory /Applications/MAMP/htdocs/mysite/web>
AllowOverride All
Allow from All
</Directory>
Alias /sf /Applications/MAMP/htdocs/mysite/lib/vendor/symfony/data/web/sf
<Directory "/Applications/MAMP/htdocs/mysite/lib/vendor/symfony/data/web/sf">
AllowOverride All
Allow from All
</Directory>
</VirtualHost>
Now, the site is working (yay!), but I can't access any more any of my other local sites because localhost is rendered as www.mysite.local.
Where am I wrong?
This worked for me!
To run projects like http://localhost/projectName:
<VirtualHost localhost:80>
ServerAdmin localhost
DocumentRoot path/to/htdocs/
ServerName localhost
</VirtualHost>
To run projects like http://somewebsite.com locally:
<VirtualHost somewebsite.com:80>
ServerAdmin webmaster#example.com
DocumentRoot /path/to/htdocs/somewebsiteFolder
ServerName www.somewebsite.com
ServerAlias somewebsite.com
</VirtualHost>
The same for other websites:
<VirtualHost anothersite.local:80>
ServerAdmin webmaster#example.com
DocumentRoot /path/to/htdocs/anotherSiteFolder
ServerName www.anothersite.local
ServerAlias anothersite.com
</VirtualHost>
localhost will always redirect to 127.0.0.1. You can trick this by naming your other VirtualHost to other local loop-back address, such as 127.0.0.2. Make sure you also change the corresponding hosts file to implement this.
For example, my httpd-vhosts.conf looks like this:
<VirtualHost 127.0.0.2:80>
DocumentRoot "D:/6. App Data/XAMPP Shared/htdocs/intranet"
ServerName intranet.dev
ServerAlias www.intranet.dev
ErrorLog "logs/intranet.dev-error.log"
CustomLog "logs/intranet.dec-access.log" combined
<Directory "D:/6. App Data/XAMPP Shared/htdocs/intranet">
Options Indexes FollowSymLinks ExecCGI Includes
Order allow,deny
Allow from all
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
(Notice that in <VirtualHost> section I typed 127.0.0.2:80. It means that this block of VirtualHost will only affects requests to IP address 127.0.0.2 port 80, which is the default port for HTTP.
To route the name intranet.dev properly, my hosts entry line is like this:
127.0.0.2 intranet.dev
This way, it will prevent you from creating another VirtualHost block for localhost, which is unnecessary.
This is normal if you see it. Since it is the first virtual host entry, it will show local host.
Let’s say for example you didn't want that page to show. All you want to show is the "Apache, it works" page, so you would make a vhost entry before mysite.local as local host and point it to the "it works" page.
But this is normal. I had this problem before, so don't worry!
You may want to use this:
<VirtualHost *:80>
DocumentRoot "somepath\Apache2.2\htdocs"
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
as your first virtual host (place it before other virtual hosts).
I had the same issue of accessing localhost while working with virtualHost. I resolved it by adding the name in the virtualHost listen code like below:
In my hosts file, I have added the below code (C:\Windows\System32\drivers\etc\hosts) -
127.0.0.1 main_live
And in my httpd.conf I have added the below code:
<VirtualHost main_live:80>
DocumentRoot H:/wamp/www/raj/main_live/
ServerName main_live
</VirtualHost>
That's it. It works, and I can use both localhost, phpmyadmin, as well as main_live (my virtual project) simultaneously.
Additional description for John Smith's answer from the official documentation. To understand why it is.
Main host goes away
If you are adding virtual hosts to an existing web server, you must
also create a block for the existing host. The
ServerName and DocumentRoot included in this virtual host should be
the same as the global ServerName and DocumentRoot. List this virtual
host first in the configuration file so that it will act as the
default host.
For example, to work properly with XAMPP, to prevent VirtualHost overriding the main host, add the follow lines into file httpd-vhosts.conf:
# Main host
<VirtualHost *:80>
ServerName localhost
DocumentRoot "/xampp/htdocs"
</VirtualHost>
# Additional host
<VirtualHost *:80>
# Over directives there
</VirtualHost>
For someone doing everything described here and still can't access:
XAMPP with Apache 2.4:
In file httpd-vhost.conf:
<VirtualHost *>
DocumentRoot "D:/xampp/htdocs/dir"
ServerName something.dev
<Directory "D:/xampp/htdocs/dir">
Require all granted #apache v 2.4.4 uses just this
</Directory>
</VirtualHost>
There isn't any need for a port, or an IP address here. Apache configures it on its own files. There isn't any need for NameVirtualHost *:80; it's deprecated. You can use it, but it doesn't make any difference.
Then to edit hosts, you must run Notepad as administrator (described below). If you were editing the file without doing this, you are editing a pseudo file, not the original (yes, it saves, etc., but it's not the real file)
In Windows:
Find the Notepad icon, right click, run as administrator, open file, go to C:/WINDOWS/system32/driver/etc/hosts, check "See all files", and open hosts.
If you were editing it before, probably you will see it's not the file you were previously editing when not running as administrator.
Then to check if Apache is reading your httpd-vhost.conf, go to folder xampFolder/apache/bin, Shift + right click, open a terminal command here, open XAMPP (as you usually do), start Apache, and then on the command line, type httpd -S. You will see a list of the virtual hosts. Just check if your something.dev is there.
According to this documentation: Name-based Virtual Host Support
You may be missing the following directive:
NameVirtualHost *:80
Just change <VirtualHost *:80> to <VirtualHost 127.0.0.1:80>.
Then the default DocumentRoot will serve for all domains or IP addresses that point to your server and specified VirtualHost will work.
It may be because your web folder (as mentioned "/Applications/MAMP/htdocs/mysite/web") is empty.
My suggestion is first to make your project and then work on making the virtual host.
I went with a similar situation. I was using an empty folder in the DocumentRoot in httpd-vhosts.confiz and I couldn't access my shahg101.com site.
I am running Ubuntu 16.04 (Xenial Xerus). This is what worked for me:
Open up a terminal and cd to /etc/apache2/sites-available. There
you will find a file called 000-default.conf.
Copy that file: cp 000-default.conf example.local.conf
Open that new file (I use Nano; use what you are comfortable with).
You will see a lot of commented lines, which you can delete.
Change <VirtualHost *:80> to <VirtualHost example.local:80>
Change the document root to reflect the location of your files.
Add the following line: ServerName example.local And if you need to, add this line: ServerAlias www.example.local
Save the file and restart Apache: service Apache2 restart
Open a browser and navigate to example.local. You should see your website.
For anyone using Windows and the Bitnami WAMP Stack Manager Tool this virtual host configuration should go into Bitnami\apache2\conf\bitnami\bitnami.conf
Note: Some settings in Directory section is not a must.
For example, my virtual host configuration for site.com would be as follows:
<VirtualHost site.com:80>
DocumentRoot "C:/Bitnami/apache2/htdocs/site/docroot"
<Directory "C:/Bitnami/apache2/htdocs/site/docroot">
Options Indexes FollowSymLinks
AllowOverride All
<IfVersion < 2.3 >
Order allow,deny
Allow from all
</IfVersion>
<IfVersion >= 2.3 >
Require all granted
</IfVersion>
</Directory>
</VirtualHost>
Remember that configuration for vhost as mentioned, by other friends, sagits's answer is needed.