I'm working with rails to create a client for the Fitbit API (very similar to twitter api) on Rails.
In my device.rb file
def fitbit_data
#client = Fitgem::Client.new (
:consumer_key => 'bb1', #I understand the security issues here and will change it for production
:consumer_secret => '81f',
:token => oauth_token,
:secret => oauth_token_secret,
:user_id => uid
)
end
It says that my syntax is wrong and asks for a ')' after :consumer_key. How do I get the syntax correct?
Note: this answer is applicable for Rails 4.1.4 and Fitgem 0.10.0.
I think the issue here is that to initialize a client, you have to pass in a hash. Additionally, I do not believe it's necessary to specify a user_id key. See my code below:
$client = Fitgem::Client.new ({ :consumer_key => ENV["FITBIT_CONSUMER_KEY"],
:consumer_secret => ENV["FITBIT_CONSUMER_SECRET"],
:token => ENV["OAUTH_TOKEN"],
:secret => ENV["OAUTH_SECRET"] })
Let me know if this helps.
Related
I am trying to implement slugs in my bundle, but when i try to create a record and run my message consumer i get the following error:
Unexpected exception occurred during Direct URL generation ["exception" => Oro\Bundle\RedirectBundle\Exception\UnsupportedEntityException { …}] ["processor" => "Oro\Bundle\RedirectBundle\Async\DirectUrlProcessor","message_id" => "oro.6256de2124b630.96491198","message_body" => ["createRedirect" => true,"id" => [3],"class" => "Phpro\OroBundleBlogBundle\Entity\BlogPostCategory"],"message_properties" => ["oro.message_queue.client.topic_name" => "oro.redirect.generate_direct_url.entity","oro.message_queue.client.queue_name" => "oro.default","oro.security.token" => "organizationId=1;userId=1;userClass=Oro\Bundle\UserBundle\Entity\User;roles=ROLE_ADMINISTRATOR"],"message_headers" => ["content_type" => "application/json","message_id" => "oro.6256de2124b630.96491198","timestamp" => "1649860129","priority" => "2"],"elapsed_time" => "34 ms","memory_usage" => "107.57 MB"]
The slugs are stored, but the use of the get_slug_urls_for_prototypes twig filter results in the following error An exception has been thrown during the rendering of a template (""). Again because of the UnsupportedEntityException
Am i missing some configuration?
As mentioned in the OroCommerce documentation the entity must implement the interface to support slugs. Make sure you fulfilled this requirement.
I hope this post will help someone.I need to use SendCloud to send emails through smtp.At the begin i add header in ActionMailer:
headers["X-SMTPAPI"] = JSON.dump({"to" => emails, "sub" => {"%name%" => names}})
But it can't work, and i also can't receiver the return error code through Rails.Then i find the way through communication with their support:
headers["X-SMTPAPI"] = Base64.encode64(JSON.dump({"to" => emails, "sub" => {"%name%" => names}}))
But it also can't work correctly.Then i compare the generated headers["X-SMTPAPI"] with the sent headers["X-SMTPAPI"], and found Rails insert '\n' in it for format.In the end, Mail gem convert the '\n':
def encode_crlf(value)
value.gsub!(CR, CR_ENCODED)
value.gsub!(LF, LF_ENCODED)
value
end
So, if i want it's success, i need to do like this:
headers["X-SMTPAPI"] = Base64.encode64(JSON.dump({"to" => emails, "sub" => {"%name%" => names}})).gsub!(/\n/,'')
Wow, i can send 'x-smtpapi' header in Rails successfully!
I solve it by encode and replacing '\n':
headers["X-SMTPAPI"] = Base64.encode64(JSON.dump({"to" => emails, "sub" => {"%name%" => names}})).gsub!(/\n/,'')
I'm getting an error that I'm exceeding the number of requests allowed per session (30) when using this query (using Include instead of Customize):
ApplicationServer appServer = QuerySingleResultAndSetEtag(session => session
.Include<ApplicationServer>(x => x.CustomVariableGroupIds)
.Include<ApplicationServer>(x => x.ApplicationIdsForAllAppWithGroups)
.Include<ApplicationServer>(x => x.CustomVariableGroupIdsForAllAppWithGroups)
.Include<ApplicationServer>(x => x.CustomVariableGroupIdsForGroupsWithinApps)
.Include<ApplicationServer>(x => x.InstallationEnvironmentId)
.Load <ApplicationServer>(id))
as ApplicationServer;
Note, the error occurs on this line, which is called for each AppWithGroup within an application:
appGroup.Application = QuerySingleResultAndSetEtag(session =>
session.Load<Application>(appGroup.ApplicationId)) as Application;
However, this query (using Customize) doesn't create extra requests:
ApplicationServer appServer = QuerySingleResultAndSetEtag(session =>
session.Query<ApplicationServer>()
.Customize(x => x.Include<ApplicationServer>(y => y.CustomVariableGroupIds))
.Customize(x => x.Include<ApplicationServer>(y => y.ApplicationIdsForAllAppWithGroups))
.Customize(x => x.Include<ApplicationServer>(y => y.CustomVariableGroupIdsForAllAppWithGroups))
.Customize(x => x.Include<ApplicationServer>(y => y.CustomVariableGroupIdsForGroupsWithinApps))
.Customize(x => x.Include<ApplicationServer>(y => y.InstallationEnvironmentId))
.Where(server => server.Id == id).FirstOrDefault())
as ApplicationServer;
However, the above query causes an error:
Attempt to query by id only is blocked, you should use call
session.Load("applications/2017"); instead of
session.Query().Where(x=>x.Id == "applications/2017");
You can turn this error off by specifying
documentStore.Conventions.AllowQueriesOnId = true;, but that is not
recommend and provided for backward compatibility reasons only.
I had to set AllowQueriesOnId = true because it was the only way I could get this to work.
What am I doing wrong in the first query to cause the includes not to work?
By the way, another post had the same issue where he had to use Customize. I'd like to do this correctly though.
I'm not sure why the load isn't doing this for you, What version of raven are you on? I just tested this in Raven 2.5 build 2700 and the include is bringing back the information for me in a single request.
Anyway, with the load not working quite like i would expect, i would switch to a set of lazy queries to get what you want in 2 server round trips. http://ravendb.net/docs/2.5/client-api/querying/lazy-operations.
Another option that might work out better for you, (depending on what you are really doing with all of that data) is a transformer. http://ravendb.net/docs/2.5/client-api/querying/results-transformation/result-transformers?version=2.5
Hope that helps.
Using paypal-recurring gem, how can we ask for full refunds for a recurring profile? I'm using Ruby on Rails for developing my application. I tried searching for it, but didn't found appropriate answer to my problem.
I've found this link:
https://www.x.com/developers/paypal/documentation-tools/api/refundtransaction-api-operation-soap
But I don't understand how to integrate it with my app.
I'm using this gem,
https://github.com/fnando/paypal-recurring
And my code is as follows:
def refund_full_paypal_transaction
PayPal::Recurring.new({
:profile_id => "customers profile id",
:transaction_id => "to_be_refunded transaction_id",
:reference => "12345",
:refund_type => :full,
:amount => "whatever amount",
:currency => "USD"
})
end
It looks like the gem already provides RefundTransaction for you. I'm not a Ruby developer, but if you look at /lib/paypal/recurring/request.rb you'll see it's a simple class that builds your API requests for you.
The METHODS array at the top specifies the different requests that it seems to support, and RefundTransaction is one of them.
So again, I can't give too detailed an answer without knowing Ruby better, but from what I see you can simply pass in the refund attribute there along with the original transaction ID to be refunded and it'll handle the rest for you.
Hope that helps.
# Request a refund.
ppr = PayPal::Recurring.new({
:profile_id => "I-VCEL6TRG35CU",
:transaction_id => "ABCEDFGH",
:reference => "1234",
:refund_type => :partial,
:amount => "9.00",
:currency => "USD"
})
response = ppr.refund
worked !!! found in https://github.com/fnando/paypal-recurring/blob/master/lib/paypal/recurring/base.rb
Thanks !!!
My problem is on facebook callback url. I am using fbgraph gem on Rails 3.0.
I ask for extended permissions on my tab application. So in the callback I wait code parameter and access_token.
I extract this code from fbgraph official GIT repository.
def authorize
begin
#auth.client.authorization_code = params[:code]
#In access_token line should return me access__token but throw a error message (see below)
access_token = #auth.client.access_token! # => Rack::OAuth2::AccessToken
#facebook_user = FbGraph::User.me(access_token).fetch # => FbGraph::User
#MORE CODE WITHOUT IMPORTANCE
redirect_to :controller => "dashboard", :action => "index"
rescue Exception => e
logger.info(e.message)
end
end
Throw this error message:
Rack::OAuth::Client::Error # => #status = 400, Message => Missing redirect uri
Please I need help quickly. Excuse me and thanks in advance
I'm using the fb_graph gem which is similar. In order to get the access_token you also need to supply the callback URI - this is the fb_graph version:
client.redirect_uri = "http://your.callback.uri"
client.authorization_code = params[:code]
access_token = client.access_token!
Update:
Looking at the fbgraph gem documentation I think you need to replace these two lines:
#auth.client.authorization_code = params[:code]
access_token = #auth.client.access_token!
With this:
access_token = #auth.client.authorization.process_callback(params[:code], :redirect_uri => callback_url)
To be honest I looked at using the fbgraph gem but the documentation was so bad that I switched to fb_graph instead which is similar and actually has some useful examples in the documentation.