I have a git repo project in eclipse which I have been documenting using doxygen (v1.8.4).
If I run the latex make ion a fresh clone of the project it runs fine and the PDF is made.
However, if I then run a doxy build, which completes OK, then attempt to run the latex make, it fails for
! Package inputenc Error: Keyboard character used is undefined
(inputenc) in inputencoding `utf8'.
See the inputenc package documentation for explanation.
Type H <return> for immediate help.
...
I have tried switching the encoding of the doxyfile by setting DOXYFILE_ENCODING to ISO-8859-1 with no change in the result... How can I fix this?? Thanks.
EDIT: I have used no non-UTF-8 chars as far as I know in my files, the file referenced before the error is very short and definitely doesn't have non-UTF-8 chars in it. I've even tried clearing my latex output dir and building from scratch with no luck...
EDIT: Irealised that the doxy build only appears to run correctly. It doesnt show any errors, but it should, for example run DOT and build about 10 graphs. The console output says Running dot, but it doesn't say generating graph (n/x) like it should when it actually makes the graphs...
Short answer: So by a slow process of elimination I found that this was caused by a single apostrophe in a file that had appeared to be already built and made without error!!
Long answer: Firstly I used used the project properties to flip the encoding from the default Cp1252 to UTF-8. Then I started removing files one-by-one until rebuilding and remaking after each removal, until the make ran successfully. I re-added all files, but deleted the content in the most recently removed file and tested the make - to confirm it was this file and only this file that caused the issue. the make ran fine. So I pasted the content back into the empty file, and started deleting smaller and smaller sections of the file, again rebuilding and remaking each time until I was left with a good make without the apostrophe and a bad one with it... I simply retyped the apostrophe (as this would then force it to be a UTF-8 char) and success!! Such an annoying bug!
Dude you made it a hard way. Why not use python to do the work for you:
f = open(fn,"rb")
data = f.read()
f.close()
for i in range(len(data)):
ch = data[i]
if(ch > 0x7F): # non ASCII character
print("char: %c, idx: %d, file: %s"%(ch,i,fn))
str2 = str(data[i-30:i+30])#.decode("utf-8")
print("txt: %s" % (str2))
Related
I have upgraded my dbt version to 1.0.0 yesterday night and ran few connection test. It went well . Now when i am running the my first dbt example model , i am getting below error , even though i have not changed any code in this default example model.
Same error i am getting while running dbt seed command also for a csv dataset . The csv is utf-8 encoded and no special character in it .
I am using python 3.9
Could anyone suggest what is the issue ?
Below is my first dbt model sql
After lots of back and forth, I figured out the issue. This is more like fundamental concept issue.
Every time we execute dbt run, dbt will scan through the entire project directory ( including seeds directory even though it is not materializing the seed ) [Attached screenshot below].
If it finds any csv it also parsed it .
In case of above error, I had a csv file which looks follows :
If we see the highlighted line it contains some symbol character which dbt (i.e python) was not able to parse it causing above error.
This symbol was not visible earlier in excel or notepad++.
It could be the issue with Snowflake python connector that #PeterH has pointed out .
As temporary solution , for now we are manually removing these character from Data file.
I’d leave this as a comment but I don’t have the rep yet…
This appears to be related to a recently-opened issue.
https://github.com/dbt-labs/dbt-snowflake/issues/66
Apparently it’s something to do with the snowflake python adapter.
Since you’re seeing the error from a different context, it might be helpful for you to post in that issue that you’re seeing this outside of query preview.
I have a model of a heating process on Ansys Multiphysics, V11.
After running the simulation, I have a script to plot a temperature profile:
!---------------- POST PROCESSING -----------------------
/post1 ! tdatabase postprocessor
!---define profile temperature
path,s_temp1,2,,100 ! define a path
ppath,1,,dop/2,0,0 ! create a path point
ppath,2,,dop/2,1.5,0 ! create a path point
PDEF,surf_t1,TEMP, ,noav ! print a path
plpath,surf_t1 ! plot a path
What I now need, is to save the resulting path in a text file. I have already looked online for a solution, and found the following code to do it, which I appended after the lines above:
/OUTPUT,filename,extension
PRPATH,surf_t1
/OUTPUT
Ansys generates the file filename.extension but it is empty. I tried to place the OUTPUT command in a few locations in the script, but without any success.
I suspect I need to define something else, but I have no idea where to look, as Ansys documentation online is terribly chaotic, and all internet pages I've opened before writing this question are not better.
A final note: Ansys V11 is an old version of the software, but I don't want to upgrade it and fit the old model to the new software.
For the output of the simulation (which includes all calculation steps, and sub-steps description and node-by-node results) the output must be declared in the beginning of the code, and not in the postprocessing phase.
Declaring
/OUTPUT,filename,extension
in the preamble of the main script makes such that the output is stored in the right location, with the desired extension. At the end of the scripts, you must then declare
/OUTPUT
to reset the output file location for ANSYS.
The output to the PATH call made in the postprocessing script is however not printed in the file.
It is convenient to use
*CFOPEN,file,ext
*VWRITE,Vector(1,1).Vector(1,2)
(2F12.6)
*CFCLOSE
where Vector(1,1) is a two column array created by *DIM, and stores your data to output to file
As this is a special command, run it from file i.e. macro_output.mac
I had a script that was running locally, but it failed on Rally.
The reason it turns out is because the script contains the following line:
var regex = new RegExp("/Metrics/" + this.type + "/(\\d+)-(\\d+)");
This is so I can look for a particular string, based on this.type. Unfortunately something in the rake file changes the \\d expressions to \d, which breaks the script. This will probably break any script that relies on a double \ to escape stuff.
I was able to get around this by using [0-9] instead of \d, but it would be nice to get a more robust workaround to this nasty little gotcha.
This issue is fixed as of this commit. You can download the new rake file and rebuild your app.
I've done very little with batch files but I'm trying to track down a strange bug I've been encountering on a legacy system.
I have a number of .exe files in particular folder. This script is supposed to duplicate them with a different file name.
Code From Batch File
for %%i in (*.exe) do copy \\networkpath\folder\%%i \\networkpath\folder\%%i.backup.exe
(Note: The source and destination folders are THE SAME)
Example Of Desired Behavior:
File1.exe --> Becomes --> File1.exe.backup.exe
File2.exe --> Becomes --> File2.exe.backup.exe
Now first, let me say that this is not the approach I would take. I know there are other (potentially more straight forward) ways to do this. I also know that you might wonder WHY on earth we care about creating a FileX.exe.backup.exe. But this script has been running for years and I'm told the problem only started recently. I'm trying to pinpoint the problem, not rewrite the code (even if it would be trivial).
Example Buggy Output:
File1.exe.backup.exe
File1.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
File1.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
etc...
File2.exe.backup.exe
File2.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
File2.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe.backup.exe
Not knowing anything about batch files, I looked at this and figured that the condition of the for statement was being re-evaluated after each iteration - creating a (near) infinite loop of copying (I can see that, eventually, the copy will fail when the names get too long).
This would explain the behaviour I'm seeing. And when cleaned the directory in question so that it had only the original File1.exe file and ran the script it produced the bug code. The problem is that I CANNOT replicate the behaviour anywhere else!?!
When I create a folder locally with a few .exe files and run the script - I get the expected output. And yes, if I run it again, I get one instance of 'File1.exe.backup.exe.backup.exe' (and each time I run it again, it increases in length by one). But I cannot get it to enter the near-infinite loop case.
It's been driving me crazy.
The bug is occurring on a networked location - so I've tried to recreate it on one - but again, no success. Because it's a shared network location, I wondered if it could have something to do with other people accessing or modifying files in the folder and even introduced delays and wrote a tiny program to perform actions in the same folder - but without any success.
The documentation I can find on the 'for' statement doesn't really help, but all of the tests I've run seem to suggest that the in (*.exe) section is only evaluated once at the beginning of execution.
Does anyone have any suggestions for what might be going on here?
I agree with Andriy M's comment - it looks to be related to Windows 7 Batch Script 'For' Command Error/Bug
The following change should fix the problem:
for /f "eol=: delims=" %%i in ('dir /b *.exe') do copy \\networkpath\folder\%%i \\networkpath\folder\%%i.backup.exe
Any file that starts with a semicolon (highly unlikely, but it can happen) would be skipped with the default EOL of semicolon. To be safe you should set EOL to some character that could never start a file name (or any path). That is why I chose the colon - it cannot appear in a folder or file name, and can only appear after a drive letter. So it should always be safe.
Copy supports wildcard characters also in target path. You can use
copy \\networkpath\folder\*.exe \\networkpath\folder\*.backup.exe
I hate Xcode 4! It crashes all the time and finally it gives me an error in CABase.h file which is an library header file that I am not allowed to modify..
I don't even know how this file is broken.
How to fix this problem? It complains like
"Expected *before*
Expected '=',',',';','asm' or '_attribute_' before 'extern'
Also, how can I completely remove Xcode on my Mac and re-install?
You probably just have a simple error, perhaps in a header which is included prior to CABase.h. Use a "divide and conquer" strategy to locate it.
To answer your last question:
$ sudo /Developer/Library/uninstall-devtools –mode=all
This happened to me just because I had the letter 's' at the beginning of one of my implementation files. I must have missed the cmd key when cmd+s for saving the file. Luckily, another compile error discovered this and removing the 's' fixed both errors.
For example,
s//
// GraphingViewController.m