Hi I have one program that I need to run on my server but the problem is that my server don't have any monitor, keyabord and mouse attach to it so I can confirn when windows 7 ask me to run program so is posible to just plug USB Mass Storage device in a computer and computer would execute this without any qestions?
Perhaps you could look into using autorun or some variant thereof (e.g. a program that would monitor the USB bus for devices, and automatically run some program when it detects that an appropriate storage device has been connect).
Bear in mind that, depending on the physical setup, this could be used as an attack vector.
As Celeriko said, you should try to find a way into connecting to your server remotely. Whether that be through SSH or a tool such as PUTTY (basically SSH right? I'm not sure off top of my head).
Having a usb automatically execute something would be a security risk and I believe it is restricted for that reason.
Best of luck trying to connect remotely into your server, it shouldn't be too difficult.
Related
I have a device connected to a USB and it periodically sends data to my PC. During the time it is not sending data, the USB cable needs to be removed, else, the device won't work (a fail-safe feature, if the USB cable is connected and attached to pc, the device is in communication mode, if the USB cable is disconnected from pc, it is in stand-alone operation mode).
I was thinking to use the Devcon so I font has to use another hardware, I'll just disable the USB port during an operation mode, then enable it during communication mode. However, the periodic transfer of data can be set to every 5,10,15,30 minutes depending on the settings.
My question is, will it be okay to disable/enable the USB port periodically? Say every 5 minutes? Won't it cause any problem in the long run? Or would it be more efficient for me to use external hardware, a switch to connect/disconnect the USB? Appreciate any advice or thoughts.
If devcon works for you, I don't see why it would cause any problems in the long run. There is no inherent reason why the hardware should get damaged when you run some commands in your software to disable a USB port.
Using external hardware to accomplish the same thing would not be more efficient because you'd have to pay for the hardware and maintain it.
I have a USB modem on a server which occasionally needs to be turned off/on again to receive SIM updates and I can't reboot the server as we rely on it to serve various web pages.
Is there any way to do this programmatically? An AT command? Power down the USB port?
I don't always have access to the server so unplugging it and plugging it back in isn't an option unfortunately.
We're coding in C++/CLI if that makes a difference.
It would be great if someone knew of a generic solution to this, but for the Option Globetrotter 452 I'm using, the manufacturer reports that issuing an AT_ORESET command will instruct the device to reboot ...just in case anyone else wants to do this.
I need to test the bandwidth I have on my USB RNDIS connection. I am using windows CE 6.0.
I already tried looking into iperf for windows ce, but, sadly, I did not manage to compile it.
Can anybody recommend of a tool/API to test the bandwidth under Windows CE?
In case the answer involves an API, I am looking for something with minimal effort (obviously)
Can't you do something as simple as connecting to the other end (you didn't say if you want to test from the device side or PC side), pull some known-size file, and time the pull. You then have bytes/time.
The joys of multimonitor programming are countless, I think there are about 5 blog posts on Coding Horror on the topic alone!
I often code in Windows on my main machine, and have my Mac laptop set up to the side. I use the Mac both to compile Mac builds but also as my "reference web browser". There's no KVM or anything.
However a casual conversation at a conference led me to the question, could I use two independent machines to share windows? Literally move some windows from one machine to another, so I could use one PC's display as "overflow" from the other.
Some googling suddenly shows that this is possible in some situations for sure:
Synergy and Maxivista
My question is whether any programmers have tried such a setup. We have unique needs especially with multiple text windows and editors, and this kind of tool may be a huge win or a huge hassle.
This solution feels like a combination of easy KVM switching AND multiple monitors.. it sounds like a programming dream! So advice or especially reports of actual experience in a programming environment would be greatly useful before I invest in the rather complex setup.
Followup:
Sounds like I'm asking for something that doesn't exist! It's kind of combination of a software KVM and VNC. But the VNC would need to break out the app windows and allow individual manipulation (like that maxivista commercial tool, which is Vista only).
Thanks for all the feedback. Looks like there's demand for a cool app if anyone has the drive to be first in this new nich!
Synergy doesn't allow you to move windows between machines (that would require a silly amount of work behind the scenes), but it does allow you to share a keyboard and mouse between two machines so they "appear" to be all one machine, but actually run separately.
I personally use Input Director, as I found it more stable than Synergy. I have my laptop with an external monitor to the right, and my desktop to the left as an Input Director slave. My desktop runs a different O/S and is basically my guinea pig box for testing stuff and for anything I need to keep running when I leave the office. Cut + paste is pretty seamless, so I can quite happily fire up an RDP session to a server on my desktop, and cut+paste SQL scripts from that to my laptop.
It's a very useful thing to have if you have a few physical boxes and monitors kicking around :)
I've actually managed to use spare notebook as a second monitor to Desktop PC. This allows to move windows to second PC, but not vise-versa.
Solution would work basically with any OS.
The only requirement is a spare VGA (or DVI-I/DVI-A) port on server PC.
Make a dummy VGA plug http://www.overclock.net/t/384733/the-30-second-dummy-plug
This will also work for DVI-I/DVI-A port + DVI-VGA adapter
Detect virtual monitor with your OS. Monitor will be detected as very generic monitor, so you can set up any resolution. Set it to slave PC resolution.
Use any remote control software to connect from slave to server PC. Set it to display only "virtual" monitor.
That's all. Your slave PC is a second monitor for server PC.
I've used this on Windows 7 + TeamViewer. I've additionally set up Mouse Without Borders (Microsoft Synergy analog) to be able to use slave PC with same mouse&keyboard, though this is not required if you intend to transform it to monitor-only.
Xdmx - Distributed Multihead X Project (linux only)
Provides native X display on external machines, no VNC cons.
The following is not exactly what you want, but pretty close:
You can start a VNC server on the Windows machine, which will let you "export" its graphical screen.
Then, unplug the monitor from the Windows machine and use it as external laptop monitor instead, with your Mac laptop.
There, on your Mac, you just connect to the VNC session using Chicken of the VNC, which will give you the graphical screen content of the Windows machine as a Mac window (interactively, so you can actually control the windows machine as if you were working on it directly). You can put that on the external monitor, and you can also put other windows there, so you really have a shared environment.
I believe this solution also lets you copy and paste content from the Windows screen to Mac windows and vice versa.
I use MaxiVista on WinXP while programming. It works fantastically and lets me add a third screen to my multi-monitor configuration.
There is hope, here for windows users: http://virtualmonitor.github.io/ Looks like a work-in-progress and only supports windows 2000 - windows 7, but he's looking for help with windows 7 - 8.
Unfortunately, synergy doesn't allow moving windows across screens currently. It only forwards mouse&keyboard events from one set of physical devices to different computers.
Yes, and I love it. It allows you get past 2 screens on a laptop, and really I find 3 a great amount.
If your main machine is a Mac you want ScreenRecycler. You can then use monitors on other Mac, Windows, and Linux machines (anything with a VNC client). You will want something better than the Mac's crappy windows management though. I suggest Many Tricks' Moom and Witch.
On Windows, as #LachlanG said, MaxiVista works great. And it supports adding monitors from Windows, Mac, and Linux machines.
I am reusing my old laptop as a second monitor to see the live preview while coding. I am using SpaceDesk, which is free.
I use barrier and open source fork of synergy. Its a little hard to use but works really well. (To find it just search google for 'barrier github').
Can someone explain what is the difference between X server and Remote Terminal servers in simple terms?
For example, Hummingbird Exceed is an X server and Citrix is a Remote Terminal Server. How do these servers work?
A terminal server runs at the "other" machine while you use a remote desktop client to view the other machine's screen.
A X server (of the X11 Window System) runs on your machine while another machine (or several thereof) send their output to your computer.
The most important difference to the end user is probably "culture": With the X Window system you typically work with windows that run on several hosts. (You often sit in front of a quite stripped down workstation, get one application from one computer, another one from another computer.) When working with X things feel very heterogeneous - a special application only runs on a HP workstation while your company is stuffed with suns or linux boxes? No problem, just buy one HP, everone can use that application over the network like as it was local.)
Remote terminal services feel more like another computer sends its complete screen to you, more like you have a 100-Mile-Long monitor and usb cable (with a little lag built in). You typically use a remote desktop client that sends a complete desktop to you.
However in recent times both techniques get close to another - windows remote desktop (which is based on citrix) can send only application windows to your desktop, while a lot of programs based on X11 are theoretically network transparent but practically need to run on the local machine. (Sorry, no 3D shooter over the network - an extreme example).
Which one is better? I don't dare to say. White X11 is a lot more flexible (it was designed with network transparency in mind - it makes absolutely no difference if an application runs local or remote - it is in many aspects more complicated. As long as there was no remote desktop sharing there was a clear advantage, but slowly the gap is closing, for example by terminal services now allowing you to do many things that were available with X11 only in earlier times.)
By the way, the main reason many X11 application still feel a little "snappier" over the network than windows counterparts is the thing that many application programmers on windows still think they always run local and dump a lot of bitmap graphics on the screen - like custom toolbars in ZIP tools. X11 applications did not do this for a long time and chose "ugly but fast" because X11 forces you to think about the network. But as X11 applications get more pretty and Windows programmers more aware about terminal services the difference will dwindle.
Oh and an important point: X11 is deeply ingrained in the Unix way of things, Citrix is mainly used on Windows (in the form of Microsoft's Windows Terminal Services - which originated in Citrix code). So lock a terminal services admin and a X11 operator into a cage and step back watching bloodshed when they figure out who they are locked in with ...
An X server most likely refers to the X11 windowing system, which is the GUI that most unix flavors (including linux) use. It's a client/server setup, and has been around for a very long time
A remote Terminal Server in the case of Citrix is a remote windows instance that can be connected to with a special Citrix client. The Citrix environments I'm familiar with are all MS Windows solutions, ie they work similar to X, but are for Windows Servers only
They both sort of operate in similar fashions, which is serving a remote client a windowing solution. IE, they both let a server run the actual application while the display of that application is sent back over the network to a client PC.
A 'Terminal Server', as it's called, basically allow you to connect to a Windows session remotely. They employ a bit of magic to make the experience snappy over connections with latency. The Windows GUI system isn't network transparent like X, so it took a while longer to get this feature. Windows Server 2008 and Citrix products have the ability to let you use a single application, unlike the traditional Terminal Server.
X is the GUI protocol for Unix/Linux. The X server accepts connections and displays their windows. The clients are actually the programs themselves. These clients can be local or remote, it doesn't matter to X. X just displays them as requested, on the local screen or over a TCP connection. This is lower level stuff than terminal servers, and allows graphical programs to run on one machine and display on another. X11 doesn't compress or encrypt the traffic like RDP does (although SSH can help you out there).
The linux equivalent of RDP is NX. They provide free software to run NX servers/clients. I've used it and it works pretty well.