Getting the following error from SQL Server 2008:
A fatal error occurred while reading the input stream from the
network. The session will be terminated (input error: 109, output
error: 0).
I am running Windows 7 Pro 64 BIT / 12 GIG RAM, IIS.
Under light load (1 request per second) I get the above error, not sure why.
I am using LoadUI (as this is a service based app) to execute the same request 1 per second. Which works fine. Now if I make another request from a Web App then I get the above error message, IIS Process's memory jumps (can carries on) from couple of hundred meg to 9 GIG in matter of 5 seconds.
It appears that SQL Server cannot handle the amount of requests/connections on Windows 7, I am hoping I will not see this in PROD.
Any help would be great.
Paul.
Related
Hello everyone and thanks for reading this problem.
I have a solution in C# using the zkemkeeper dll to get the records from some access control devices. When I "ping" them, there isn't any problem, but when I try to connect to them (Using my solution or the standalone demo to get attendance) I get the "-307" error with the "Unable to connect message". That's not very clear and I would really aprecciate if someone can explain what this error is (please!!!!). I would really like to understand these errors myself, so, where can I find all the definition of these errors?
In short:
1.- What is the problem regarding the "-307" error?
2.- Is there any place where all these errors are documented?
Thanks in advance!!
enter image description here
maybe you should check your device, you can ping them
Attention
The dwErrorCode parameter specifies the error code. The values are described as follows:
During connection, the following error codes may be returned:
0 Connected successfully
-1 Failed to invoke the interface
-2 Failed to initialize
-3 Failed to initialize parameters
-5 Data mode read error
-6 Wrong password
-7 Reply error
-8 Receive timeout
-307 Connection timeout
In invoking other interfaces, the following error codes may be returned:
-201 Device is busy
-199 New Mode
-103 device send back error of face version error
-102 face template version error, like 8.0 face template send to 7.0 device
-101 malloc memory failed
-100 Not supported or the data does not exist
-10 The length of transmitted data is incorrect
-5 Data already exists
-4 Insufficient space
-3 Wrong size
-2 File read/write error
-1 The SDK is not initialized and needs to be reconnected
0 Data not found or duplicate data
1 Correct operation
4 Parameter error
101 Buffer allocation error
102 repeat invoking
Underlying error codes:
-12001 Socket creation timeout (connection timeout)
-12002 Insufficient memory
-12003 Wrong Socket version
-12004 Not TCP protocol
-12005 Waiting timeout
-12006 Data transmission timeout
-12007 Data reading timeout
-12008 Failed to read Socket
-13009 Waiting event error
-13010 Exceeded retry attempts
-13011 Wrong reply ID
-13012 Checksum error
-13013 Waiting event timeout
-13014 DIRTY_DATA
-13015 Buffer size too small
-13016 Wrong data length
-13017 Invalid data read1
-13018 Invalid data read2
-13019 Invalid data read3
-13020 Data loss
-13021 Memory initialization error
-15001 Invoking return value of status key issued by SetShortkey interface repeatedly
-15002 Invoking return value of description issued by SetShortkey interface repeatedly
-15003 The two level menu is not opened in the device, and the data need not be issued
getdevicedata and setdevicedata invocation error codes
-15100 Error occurs in obtaining table structure
-15101 The condition field does not exist in the table structure
-15102 Inconsistency in the total number of fields
-15103 Inconsistency in sorting fields
-15104 Memory allocation error
-15105 Data parsing error
-15106 Data overflow as the transmitted data exceeds 4M
-15108 Invalid options
-15113 Data parsing error: table ID not found
-15114 A data exception is returned as the number of fields is smaller than or equal to 0
-15115 A data exception is returned as the total number of table fields is inconsistent with the
total number of fields of the data
Firmware error codes:
2000 Return OK to execute
-2001 Return Fail to execute command
-2002 Return Data
-2003 Regstered event occorred
-2004 Return REPEAT Command
-2005 Return UNAUTH Command
0xffff Return Unknown Command
-4999 Device parameter read error
-4998 Device parameter write error
-4997 The length of the data sent by the software to the device is incorrect
228
229
-4996 A parameter error exists in the data sent by the software to the device
-4995 Failed to add data to the database
-4994 Failed to update the database
-4993 Failed to read data from the database
-4992 Failed to delete data in the database
-4991 Data not found in the database
-4990 The data amount in the database reaches the limit
-4989 Failed to allocate memory to a session
-4988 Insufficient space in the memory allocated to a session
-4987 The memory allocated to a session overflows
-4986 File does not exist
-4985 File read failure
-4984 File write failure
-4983 Failed to calculate the hash value
-4982 Failed to allocate memory
Note
This interface is applicable to the new architecture firmware.
More info from stms :
Short Text
SQL error "SQL code: -10108" occurred while accessing table "CDHDR".
What happened?
Database error text: "SQL message: Session has been reconnected."
Return value of the database layer: "SQL dbsl rc: 99"
The problem is that client is running this code through the job in which I am not available to debug it. All I know is that it is working for other countries selected but for some specific it is not so the question is :
Was it a temporary connection error between two servers or is it data overload issue due to SELECT statement?
At the moment I am not really sure which thing I have to look on the system, the same program once produced the error for exceeding the limit in the db query ( > 10 minutes) so this might be related to system configuration or what?
Thanks in advance
I'm maintaining an antedeluvian Notes application which connects to a SAP back-end via a manually done 'Webservice'
The server is running Domino Release 7.0.4FP2 HF97.
The Webservice is not the more recently Webservice Consumer, but a large Java agent which is using Apache soap.jar (org.apache.soap). Below an example of the calling code.
private Call setupSOAPCall() {
Call call = new Call();
SOAPHTTPConnection conn = new SOAPHTTPConnection();
call.setSOAPTransport(conn);
call.setEncodingStyleURI(Constants.NS_URI_SOAP_ENC);
There has been a change in the SAP system which is now taking 8 minutes to complete (verified by SAP Team).
I'm getting an error message as follows:
[SOAPException: faultCode=SOAP-ENV:Client; msg=For input string: "906 "; targetException=java.lang.NumberFormatException: For input string: "906 "]
I found a blog article describing the error message quite closely:
https://thejavablog.wordpress.com/category/jmeter/
and I've come to the hypothesis that it is a timeout message that is returning to my Call object and that this timeout message is being incorrectly parsed, hence the NumberFormat Exception.
Looking at my logs I can see that there is a time difference of 62 seconds between my call and the response.
I recommended that the server setting in the server document, tab Internet Protocols/HTTP/Timeouts/Request timeouts be changed from 60 seconds to 600 seconds, and the http task restarted with
tell http restart
I've re-run the tests and I am getting the same error, and the time difference is still slightly more than 60 seconds, which is not what I was expecting.
I read Michael Rulnau's blog entry
http://www.mruhnau.net/2014/06/how-to-overcome-domino-webservice.html
which points to this APR
http://www-01.ibm.com/support/docview.wss?uid=swg1LO48272
but I'm not convinced that this would apply in this case, since there is no way that IBM would know that my Java agent is in fact making a Soap call.
My current hypothesis is that I have to use either the setTimeout() method on
org.apache.axis.client.Call
https://axis.apache.org/axis/java/apiDocs/org/apache/axis/client/Call.html
or on the org.apache.soap.transport.http.SOAPHTTPConnection
https://docs.oracle.com/cd/B13789_01/appdev.101/b12024/org/apache/soap/transport/http/SOAPHTTPConnection.html
and that the timeout value is an apache default, not something that is controlled by the Domino server.
I'd be grateful for any help.
I understand your approach, and I hope this is the correct one to solve your problem.
Add a debug (console write would be fine) that display the default Timeout then try to increase it to 10 min.
SOAPHTTPConnection conn = new SOAPHTTPConnection();
System.out.println("time out is :" + conn.getTimeout());
conn.setTimeout(600000);//10 min in ms
System.out.println("after setting it, time out is :" + conn.getTimeout());
call.setSOAPTransport(conn);
Now keep in mind that Dommino has also a Max LotusScript/Java execution time, check this value and (at least for a try) change it: http://www.ibm.com/support/knowledgecenter/SSKTMJ_9.0.1/admin/othr_servertasksagentmanagertab_r.html (it's version 9 help but this part should be identical)
I've since discovered that it wasn't my code generating the error; the default timeout for the apache axis SOAPHTTPConnetion is 0, i.e. no timeout.
During load testing (using Load UI) of a new .Net web api using Mono hosted on a medium sized Amazon server I'm receiving the following results (in chronological order over the course of about ten minutes)
5 connections per second for 60 seconds
No errors
50 connections per second for 60 seconds
No errors
100 connections per second for 60 seconds
Received 3 errors, appearing later during the run
2014-02-07 00:12:10Z Error HttpResponseExtensions Error occured while Processing Request: [IOException] Write failure Write failure|The socket has been shut down
2014-02-07 00:12:10Z Info HttpResponseExtensions Failed to write error to response: {0} Cannot be changed after headers are sent.
5 connections per second for 60 seconds
No errors
100 connections per second for 30 seconds
No errors
100 connections per second for 60 seconds
Received 1 error same as above, appearing later during the run
100 connections per second for 45 seconds
No errors
Doing some research on this, this error seems to be a standard one received when a client closed the connection. As this is only occurring during the heavier load tests, I am wondering if it is just getting to the upper limits of what the server instance can support? If not any suggestions on hunting down the source of the errors?
Recently I used the sybase database and it report some errors, I searched many information and Expand configuration, but it's still happening.
My server computer memory and the cpu usage is normal, I don't know if machines system resources are enough for it.
This is Part of my sybase error log:
02:00000:00000:2011/12/31 10:13:21.60 kernel nl__read_defer: read failed on socket 36.
02:00000:00000:2011/12/31 10:13:25.92 kernel nl__read_defer: read failed on socket 154.
system resources not enough,Can not complete the requested service
06:00000:00000:2011/12/31 10:13:32.70 kernel nl__read_defer: read failed on socket 164.
system resources not enough,Can not complete the requested service
00:00000:00000:2011/12/31 10:13:34.40 kernel nl__read_defer: read failed on socket 34.
system resources not enough,Can not complete the requested service
....more
00:00000:00014:2012/01/04 10:25:03.59 kernel NT operating system error 1450 in module 'e:\ase1253\porttree\svr\sql\generic\ksource\strmio\n_winsock.c' at line 1987
00:00000:00014:2012/01/04 10:25:03.59 kernel NT operating system error 1450 in module 'e:\ase1253\porttree\svr\sql\generic\ksource\strmio\n_winsock.c' at line 1987
....more
ct_results(): network packet layer: internal net library error: Net-Library operation terminated due to disconnect.
my sybase product is ASE,and my machine memory is 4G
there are some configuration about sybase which I changed:
[Named Cache:default data cache]
cache size = 1400M
[Meta-Data Caches]
number of open databases = 50
number of open objects = 5000
number of open indexes = 5000
[Disk I/O]
number of devices = 20
[Physical Memory]
max memory = 2000000
[Processors]
max online engines = 8
number of engines at startup = 8
[SQL Server Administration]
procedure cache size = 400000
[User Environment]
number of user connections = 200
[Lock Manager]
number of locks = 150000
[Rep Agent Thread Administration]
enable rep agent threads = 1
the other configuration are Default
Any help would be greatly appreciated.