Within a stored procedure I need to loop the following table:
SELECT *
FROM dbo.UsersInRoles
INNER JOIN Application_Users ON UsersInRoles.AppUserID = Application_Users.AppUserID
WHERE (UsersInRoles.ApplicationId = #ApplicationId)
AND (UsersInRoles.RoleId = #CurrentRoleId)
AND (Application_Users.LastLogin < #StartDate)
And for each record that is looped I need to perform this update:
UPDATE UsersInRoles
SET UsersInRoles.RoleId = #DenyRoleId
WHERE (UsersInRoles.ApplicationId = #ApplicationId)
AND (UsersInRoles.RoleId = #CurrentRoleId)
If there is a better way to perform this then I'm open to suggestions. Basically the 1st query does a filter based upon the INNER JOIN to determine which records need to be updated. Then those filtered records are looped and updated with a new RoleID.
Update with join:
UPDATE UIR
SET UIR.RoleId = #DenyRoleId
FROM UsersInRoles UIR
INNER JOIN Application_Users ON UIR.AppUserID = Application_Users.AppUserID
WHERE (UIR.ApplicationId = #ApplicationId)
AND (UIR.RoleId = #CurrentRoleId)
AND (Application_Users.LastLogin < #StartDate)
You can use a CTE to do the UPDATE:
;WITH ToUpdate AS (
SELECT uir.RoleId
FROM dbo.UsersInRoles AS uir
INNER JOIN Application_Users AS au
ON uir.AppUserID = au.AppUserID
WHERE (uir.ApplicationId = #ApplicationId) AND
(uir.RoleId = #CurrentRoleId) AND
(au.LastLogin < #StartDate)
)
UPDATE ToUpdate
SET RoleId = #DenyRoleId
So, you just type wrap the query in a CTE and then perform the UPDATE on the table returned by the CTE. The RoleId value will be propagated to the records of the actual table, UsersInRoles.
I have the following query which populates a temporary table:
with CTE as
(
select a.accountid as 'myid',
a.new_mprnnumber,
a.new_customernumber,
b.*,
row_number()
over (partition by new_customernumber -- add additional partitions as you would group bys
order by billingPeriodEndDate desc) as r_ord
from [CRM].[crm4_MSCRM].[dbo].[AccountExtensionBase] a
inner join bill b
on a.new_mprnnumber = b.MPRN
where new_accountstage = 7
and new_accounttype = 2
)
select *
into #tempCTE
from CTE
where r_ord = 1
After gathering the information in the temporary table I want to iterate through each record and update the main table using the accountid but using the following statement:
update [CRM].[crm4_MSCRM].[dbo].[AccountExtensionBase]
set new_invoicenumber = invoicenumber
where accountid = #tempCTE.myid
I am getting the error that the multi part identifier could not be bound, any idea on what is causing this issue?
You need to bring in the temporary table:
update aeb
set new_invoicenumber = t.invoicenumber
from [CRM].[crm4_MSCRM].[dbo].[AccountExtensionBase] aeb join
#tempCTE t
on aeb.accountid = t.myid;
As a note, you don't need a temporary table. You can just do:
with tempCTE as ( . . . )
update aeb
set new_invoicenumber = t.invoicenumber
from [CRM].[crm4_MSCRM].[dbo].[AccountExtensionBase] aeb join
tempCTE t
on aeb.accountid = t.myid
where tempCTE.r_ord = 1
What would the syntax be to convert this MS Access query to run in SQL Server as it doesn't have a DistinctRow keyword
UPDATE DISTINCTROW [MyTable]
INNER JOIN [AnotherTable] ON ([MyTable].J5BINB = [AnotherTable].GKBINB)
AND ([MyTable].J5BHNB = [AnotherTable].GKBHNB)
AND ([MyTable].J5BDCD = [AnotherTable].GKBDCD)
SET [AnotherTable].TessereCorso = [MyTable].[J5F7NR];
DISTINCTROW [MyTable] removes duplicate MyTable entries from the results. Example:
select distinctrow items
items.item_number, items.name
from items
join orders on orders.item_id = items.id;
In spite of the join getting you the same item_number and name multiple times when there is more than one order for it, DISTINCTROW reduces this to one row per item. So the whole join is merely for assuring that you only select items for which exist at least one order. You don't find DISTINCTROW in any other DBMS as far as I know. Probably because it is not needed. When checking for existence, we use EXISTS of course (or IN for that matter).
You are joining MyTable and AnotherTable and expect for some reason to get the same MyTable record multifold for one AnotherTable record, so you use DISTINCTROW to only get it once. Your query would (hopefully) fail if you got two different MyTable records for one AnotherTable record.
What the update does is:
update anothertable
set tesserecorso = (select top 1 j5f7nr from mytable where mytable.j5binb = anothertable.gkbinb and ...)
where exists (select * from mytable where mytable.j5binb = anothertable.gkbinb and ...)
But this uses about the same subquery twice. So we'd want to update from a query instead.
The easiest way to get one result record per <some columns> in a standard SQL query is to aggregate data:
select *
from anothertable a
join
(
select j5binb, j5bhnb, j5bdcd, max(j5f7nr) as j5f7nr
from mytable
group by j5binb, j5bhnb, j5bdcd
) m on m.j5binb = a.gkbinb and m.j5bhnb = a.gkbhnb and m.j5bdcd = a.gkbdcd;
How to write an updateble query is different from one DBMS to another. Here is the final update statement for SQL-Server:
update a
set a.tesserecorso = m.j5f7nr
from anothertable a
join
(
select j5binb, j5bhnb, j5bdcd, max(j5f7nr) as j5f7nr
from mytable
group by j5binb, j5bhnb, j5bdcd
) m on m.j5binb = a.gkbinb and m.j5bhnb = a.gkbhnb and m.j5bdcd = a.gkbdcd;
The DISTINCTROW predicate in MS Access SQL removes duplicates across all fields of a table in join statements and not just the selected fields of query (which DISTINCT in practically all SQL dialects do). So consider selecting all fields in a derived table with DISTINCT predicate:
UPDATE [AnotherTable]
SET [AnotherTable].TessereCorso = main.[J5F7NR]
FROM
(SELECT DISTINCT m.* FROM [MyTable] m) As main
INNER JOIN [AnotherTable]
ON (main.J5BINB = [AnotherTable].GKBINB)
AND (main.J5BHNB = [AnotherTable].GKBHNB)
AND (main.J5BDCD = [AnotherTable].GKBDCD)
Another variant of the query.. (Too lazy to get the original tables).
But like the query above updates 35 rows =, so does this one
UPDATE [Albi-Anagrafe-Associati]
SET
[Albi-Anagrafe-Associati].CRegDitte = [055- Registri ditte].[CRegDitte],
[Albi-Anagrafe-Associati].NIscrTribunale = [055- Registri ditte].[NIscrTribunale],
[Albi-Anagrafe-Associati].NRegImprese = [055- Registri ditte].[NRegImprese]
FROM [055- Registri ditte]
WHERE EXISTS(
SELECT *
FROM [055- Registri ditte]-- [Albi-Anagrafe-Associati]
WHERE ([055- Registri ditte].GIBINB = [Albi-Anagrafe-Associati].GKBINB)
AND ([055- Registri ditte].GIBHNB = [Albi-Anagrafe-Associati].GKBHNB)
AND ([055- Registri ditte].GIBDCD = [Albi-Anagrafe-Associati].GKBDCD))
Update [AnotherTable]
Set [AnotherTable].TessereCorso = MyTable.[J5F7NR]
From [AnotherTable]
Inner Join
(
Select Distinct [J5BINB],[5BHNB],[J5BDCD]
,(Select Top 1 [J5F7NR] From MyTable) as [J5F7NR]
,[J5BHNB]
From MyTable
)as MyTable
On (MyTable.J5BINB = [AnotherTable].GKBINB)
AND (MyTable.J5BHNB = [AnotherTable].GKBHNB)
AND (MyTable.J5BDCD = [AnotherTable].GKBDCD)
I need to use join in below instead of Subquery.
can anybody help me to rewrite this with JOIN.
update Table1
set status = 'Edited'
where val_74 ='1' and status ='Valid'
and val_35 is not null
and (val_35,network_id) in
(select val_35,network_id from
Table2 where val_35 is not null
and status='Correct_1');
update Table1 b SET (Val_12,Val_13,Val_14)=
(select Val_12,Val_13,Val_14 from
(select Val_35,network_id, Val_12, Val_13, Val_14
from Table2
where Val_34 is not null
and (REGEXP_LIKE(Val_13,'^[0-9]+$'))
and (Val_14 is null or (REGEXP_LIKE(Val_14,'^[0-9]+$')))
group by Val_35,network_id,Val_12,Val_13,Val_14
)
where Val_35 = b.Val_35 and network_id = b.network_id and rownum=1
)
where status = 'PCStep2' and (regexp_like(Val_13,'[MSS]+') or regexp_like(Val_14,'[MSS]+'));
I tried a lot with my less Knowledge In SQL JOINs. but getting multiple erros.
can anybody help me with the queries at the earliest.
Hearty thanks in advance
Actually you can not mix a update statement with a join statement. An update statement always expects exactly one table definition after the update command.
-- ORA-00971: missing SET keyword
update orders o, customers c
set o.order_value = c.account_value
where o.cust_id = c.cust_id
-- works fine
update orders o
set o.order_value = (select c.account_value
from customers c
where c.id = o.cust_id)
Basically, I want to do this:
update vehicles_vehicle v
join shipments_shipment s on v.shipment_id=s.id
set v.price=s.price_per_vehicle;
I'm pretty sure that would work in MySQL (my background), but it doesn't seem to work in postgres. The error I get is:
ERROR: syntax error at or near "join"
LINE 1: update vehicles_vehicle v join shipments_shipment s on v.shi...
^
Surely there's an easy way to do this, but I can't find the proper syntax. So, how would I write this In PostgreSQL?
The UPDATE syntax is:
[ WITH [ RECURSIVE ] with_query [, ...] ]
UPDATE [ ONLY ] table [ [ AS ] alias ]
SET { column = { expression | DEFAULT } |
( column [, ...] ) = ( { expression | DEFAULT } [, ...] ) } [, ...]
[ FROM from_list ]
[ WHERE condition | WHERE CURRENT OF cursor_name ]
[ RETURNING * | output_expression [ [ AS ] output_name ] [, ...] ]
In your case I think you want this:
UPDATE vehicles_vehicle AS v
SET price = s.price_per_vehicle
FROM shipments_shipment AS s
WHERE v.shipment_id = s.id
Or if you need to join on two or more tables:
UPDATE table_1 t1
SET foo = 'new_value'
FROM table_2 t2
JOIN table_3 t3 ON t3.id = t2.t3_id
WHERE
t2.id = t1.t2_id
AND t3.bar = True;
The answer of Mark Byers is the optimal in this situation.
Though in more complex situations you can take the select query that returns rowids and calculated values and attach it to the update query like this:
with t as (
-- Any generic query which returns rowid and corresponding calculated values
select t1.id as rowid, f(t2, t2) as calculatedvalue
from table1 as t1
join table2 as t2 on t2.referenceid = t1.id
)
update table1
set value = t.calculatedvalue
from t
where id = t.rowid
This approach lets you develop and test your select query and in two steps convert it to the update query.
So in your case the result query will be:
with t as (
select v.id as rowid, s.price_per_vehicle as calculatedvalue
from vehicles_vehicle v
join shipments_shipment s on v.shipment_id = s.id
)
update vehicles_vehicle
set price = t.calculatedvalue
from t
where id = t.rowid
Note that column aliases are mandatory otherwise PostgreSQL will complain about the ambiguity of the column names.
Let me explain a little more by my example.
Task: correct info, where abiturients (students about to leave secondary school) have submitted applications to university earlier, than they got school certificates (yes, they got certificates earlier, than they were issued (by certificate date specified). So, we will increase application submit date to fit certificate issue date.
Thus. next MySQL-like statement:
UPDATE applications a
JOIN (
SELECT ap.id, ab.certificate_issued_at
FROM abiturients ab
JOIN applications ap
ON ab.id = ap.abiturient_id
WHERE ap.documents_taken_at::date < ab.certificate_issued_at
) b
ON a.id = b.id
SET a.documents_taken_at = b.certificate_issued_at;
Becomes PostgreSQL-like in such a way
UPDATE applications a
SET documents_taken_at = b.certificate_issued_at -- we can reference joined table here
FROM abiturients b -- joined table
WHERE
a.abiturient_id = b.id AND -- JOIN ON clause
a.documents_taken_at::date < b.certificate_issued_at -- Subquery WHERE
As you can see, original subquery JOIN's ON clause have become one of WHERE conditions, which is conjucted by AND with others, which have been moved from subquery with no changes. And there is no more need to JOIN table with itself (as it was in subquery).
For those actually wanting to do a JOIN you can also use:
UPDATE a
SET price = b_alias.unit_price
FROM a AS a_alias
LEFT JOIN b AS b_alias ON a_alias.b_fk = b_alias.id
WHERE a_alias.unit_name LIKE 'some_value'
AND a.id = a_alias.id;
You can use the a_alias in the SET section on the right of the equals sign if needed.
The fields on the left of the equals sign don't require a table reference as they are deemed to be from the original "a" table.
For those wanting to do a JOIN that updates ONLY the rows your join returns use:
UPDATE a
SET price = b_alias.unit_price
FROM a AS a_alias
LEFT JOIN b AS b_alias ON a_alias.b_fk = b_alias.id
WHERE a_alias.unit_name LIKE 'some_value'
AND a.id = a_alias.id
--the below line is critical for updating ONLY joined rows
AND a.pk_id = a_alias.pk_id;
This was mentioned above but only through a comment..Since it's critical to getting the correct result posting NEW answer that Works
Here we go:
update vehicles_vehicle v
set price=s.price_per_vehicle
from shipments_shipment s
where v.shipment_id=s.id;
Simple as I could make it.
To add something quite important to all the great answers above, when you want to update a join-table, you may have 2 problems:
you cannot use the table you want to update to JOIN another one
Postgres wants a ON clause after the JOIN so you cannot only use where clauses.
This means that basically, the following queries are not valid:
UPDATE join_a_b
SET count = 10
FROM a
JOIN b on b.id = join_a_b.b_id -- Not valid since join_a_b is used here
WHERE a.id = join_a_b.a_id
AND a.name = 'A'
AND b.name = 'B'
UPDATE join_a_b
SET count = 10
FROM a
JOIN b -- Not valid since there is no ON clause
WHERE a.id = join_a_b.a_id
AND b.id = join_a_b.b_id
a.name = 'A'
AND b.name = 'B'
Instead, you must use all the tables in the FROM clause like this:
UPDATE join_a_b
SET count = 10
FROM a, b
WHERE a.id = join_a_b.a_id
AND b.id = join_a_b.b_id
AND a.name = 'A'
AND b.name = 'B'
It might be straightforward for some but I got stuck on this problem wondering what's going on so hopefully, it will help others.
Here's a simple SQL that updates Mid_Name on the Name3 table using the Middle_Name field from Name:
update name3
set mid_name = name.middle_name
from name
where name3.person_id = name.person_id;
The link below has a example that resolve and helps understant better how use update and join with postgres.
UPDATE product
SET net_price = price - price * discount
FROM
product_segment
WHERE
product.segment_id = product_segment.id;
See: http://www.postgresqltutorial.com/postgresql-update-join/
First Table Name: tbl_table1 (tab1).
Second Table Name: tbl_table2 (tab2).
Set the tbl_table1's ac_status column to "INACTIVE"
update common.tbl_table1 as tab1
set ac_status= 'INACTIVE' --tbl_table1's "ac_status"
from common.tbl_table2 as tab2
where tab1.ref_id= '1111111'
and tab2.rel_type= 'CUSTOMER';
To UPDATE one Table using another, in PostGRE SQL / AWS (SQL workbench).
In PostGRE SQL, this is how you need to use joins in UPDATE Query:
UPDATE TABLEA set COLUMN_FROM_TABLEA = COLUMN_FROM_TABLEB FROM TABLEA,TABLEB WHERE FILTER_FROM_TABLEA = FILTER_FROM_TABLEB;
Example:
Update Employees Set Date_Of_Exit = Exit_Date_Recorded , Exit_Flg = 1 From Employees, Employee_Exit_Clearance Where Emp_ID = Exit_Emp_ID
Table A - Employees Columns in Table A - Date_Of_Exit,Emp_ID,Exit_Flg Table B is - Employee_Exit_Clearance Columns in Table B - Exit_Date_Recorded,Exit_Emp_ID
1760 rows affected
Execution time: 29.18s
--goal: update selected columns with join (postgres)--
UPDATE table1 t1
SET column1 = 'data'
FROM table1
RIGHT JOIN table2
ON table2.id = table1.id
WHERE t1.id IN
(SELECT table2.id FROM table2 WHERE table2.column2 = 12345)
The first way is slower than the second way.
First:
DO $$
DECLARE
page int := 10000;
min_id bigint; max_id bigint;
BEGIN
SELECT max(id),min(id) INTO max_id,min_id FROM opportunities;
FOR j IN min_id..max_id BY page LOOP
UPDATE opportunities SET sec_type = 'Unsec'
FROM opportunities AS opp
INNER JOIN accounts AS acc
ON opp.account_id = acc.id
WHERE acc.borrower = true
AND opp.sec_type IS NULL
AND opp.id >= j AND opp.id < j+page;
COMMIT;
END LOOP;
END; $$;
Second:
DO $$
DECLARE
page int := 10000;
min_id bigint; max_id bigint;
BEGIN
SELECT max(id),min(id) INTO max_id,min_id FROM opportunities;
FOR j IN min_id..max_id BY page LOOP
UPDATE opportunities AS opp
SET sec_type = 'Unsec'
FROM accounts AS acc
WHERE opp.account_id = acc.id
AND opp.sec_type IS NULL
AND acc.borrower = true
AND opp.id >= j AND opp.id < j+page;
COMMIT;
END LOOP;
END; $$;
WORKS PERFECT!!!
POSTGRE SQL - UPDATE With a JOIN
BELOW CODE - Check the positioning of columns and IDs as below:
If you place it exactly as below, then only it will work!
---IF you want to update FIRST table
UPDATE table1
SET attribute1 = table2.attribute1
FROM table2
WHERE table2.product_ID = table1.product_ID;
OR
---IF you want to update SECOND table
UPDATE table2
SET attribute1 = table1.attribute1
FROM table1
WHERE table1.product_ID = table2.product_ID;