i want to create two batch file one will deploy wcf service in IIS and also create virtual director and run it as a result any client can consume it. there will be another service which will stop the service and also remove the virtual directory.
i search google and found some script but no working
the below script will create virtual director and run the site
%windir%\system32\inetsrv\appcmd.exe set site "Default Web Site" -+bindings.[protocol='net.tcp',bindingInformation='808:*']
%windir%\system32\inetsrv\appcmd.exe add app /site.name:"Default Web Site" /path:/servicemodelsamples /physicalPath:C:\inetpub\wwwroot\servicemodelsamples
%windir%\system32\inetsrv\appcmd.exe set app "Default Web Site/servicemodelsamples" /enabledProtocols:http,net.tcp
pause
the below script will stop the site & remove virtual director
%windir%\system32\inetsrv\appcmd.exe set app "Default Web Site/servicemodelsamples" /enabledProtocols:http
%windir%\system32\inetsrv\appcmd.exe delete app /app.name:"Default Web Site/servicemodelsamples"
%windir%\system32\inetsrv\appcmd.exe set site "Default Web Site" --bindings.[protocol='net.tcp',bindingInformation='808:*']
i never use batch file but i like the batch file approach. so anyone tell the above script is ok or not because when i am running the first one then i am getting error : do not have permission to read the config file
here is my screen shot of batch file window with error
if possible give me any easy script for deploy wcf service to iis. thanks
If you are not able to read a config file, try opening the file as Administrator (I'm assuming you're on windows because it is a batch file.), and it will give the batch file Administrative access. (Beware if you downloaded this off the interwebs)
And, as a friendly reminder, please try to use good grammar and spelling.
Thanks,
Javaboy
Related
When I try to publish it I get the following error message:
Error 1 Web deployment task failed. (Could not connect to the remote computer ("..*.*"). On the remote computer, make sure that Web Deploy is installed and that the required process ("Web Management Service") is started. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_NOT_REACHABLE.)
I dont understand why is it referring me to a remote computer, I've specified the destination URL as my own IP address. And I have web management service checked on windows features.
How do I solve this particular error?
Try to publish to the file system, if this works move the files into you wwwroot, normally c:\inetpub\www.
then go to start and run inetmgr to open iis configuration manager, if you see your folder there right click and convert to application, accept settings then right click / manage / browse and you should see your site or an IIS error that should be easy to debug.
I never use the deploy to IIS feature from VS as it's pants.
Good luck!
I have a WCF web service that is deployed at IIS.
Part of the web service is to validate the inputs using EntLib 4.1
For ex, the string values can be of specific length and so on.
In case of the validation being failed a fault exception is raised and the service is supposed to write the message in log file.
How do I go about creating the log file to a location that can be configured from a config file.
Basically how do we write messages from IIS (since the service is hosted at IIS, I am assuming that that will be the source!)
To write to the log file, make sure that the identity running your web application has write access to the log directory.
IIS7: You can find the identity in the IIS management console. Select the application pool that your web application is using. Click on Advanced Settings. In the properties window, look for the identity field. It may say Network Service. This is the account that needs write permission to your log output folder.
IIS6: Same as IIS7 except right click on the app pool and select properties. The properties window of IIS6 will have an Identity tab.
If you already have a log file in this directory, try deleting it and letting the framework create it.
Hope this helps.
Why not just write the warnings/error to the Event Log? It's easier to maintain than arbitrary log files and you can query them from other machines.
http://imar.spaanjaars.com/275/logging-errors-to-the-event-log-in-aspnet-applications
This website helped me with the same problem on IIS 7.5, where you have new Application Pool Identities: http://learn.iis.net/page.aspx/624/application-pool-identities/
Using the command line ICACLS test.txt /grant "IIS AppPool\<AppPoolName>":F on the log file or log folder worked for me.
Trying to set the permissions via the file/folder properties dialog failed, the AppPool identity was not accepted there.
I am having a problem when I try to browse WCF service (.svc file) which is hosted in IIS7 & Windows7. It throws following error.
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
I tried to run ServiceModelReg, but it say I should have admin rights in order to run this, although I am admin on this machine.
Does any one know how to resolve this issue.
FInally....
I am able to resolve this issue.
I ran following two command and it solved the problem.
aspnet_regiis -i & ServiceModelReg -i
Even though I am admin on the machine, I need to run this 2 commands by right click and select 'Run as Admin'.
Your issued is answered here. Trying to be short:
When you start the command prompt, can
you right-click on the icon to open it
and select "Run as Administrator"? I
don't know exactly what's the logic
behind that, but on Vista there are
two kinds of administrative users, one
"normal" administrator and one
"elevated" administrator. I'd guess
the tool needs the second kind.
and second
Also, Why do you need to run
Servicemodelreg.exe on VIsta?
Officially this is not supported on
Vista. Instead you can go to WIndows
features menu throught Add remove
programs and enabled Http Activation
under .Net framework 3.0 feature.
This will enable everything you might
want to do via Servicemodelreg.exe.
Edit
And also here.
If you go into IIS Manager and double click on Handler Mappings do you have *.svc paths listed?
If they are missing this link may help http://msdn.microsoft.com/en-us/library/ms752252(v=vs.90).aspx
How can I stop and then restart an IIS 7 application pool from an MSBuild script running inside TeamCity. I want to deploy our nightly builds to an IIS server for out testers to view.
I have tried using appcmd like so:
appcmd stop apppool /apppool.name:MYAPP-POOL
... but I have run into elevation issues in Windows 2008 that so far have stopped me from being able to run that command from my TeamCity build process because Windows 2008 requires elevation in order to run appcmd.
If I do not stop the application pool before I copy my files to the web server my MSBuild script is unable to copy the files to the server.
Has anybody else seen and solved this issue when deploying web sites to IIS from TeamCity?
This article describes using an htm file named App_offline.htm to take a site offline. Once the IIS detectes this file in the root of a web application directory,
ASP.NET 2.0 will shut-down the application, unload the application
domain from the server, and stop processing any new incoming requests
for that application.
In App_offline-htm, you can put a user-friendly message indicating that the site is currently under maintainance.
Jason Lee shows the MSDeploy calls you need to use (plus much more about integrating these steps in your build scripts!).
MSDeploy
-verb:sync
-source:contentPath="[absolute_path]App_offline-Template.htm"
-dest:contentPath="name_of_site/App_offline.htm",computerName="copmuter_name",
username=user_with_administrative priviliges,password=passwort
After deployment you can remove the App_offline.htm file using the following call:
MSDeploy
-verb:delete
-dest:contentPath="name_of_site/App_offline.htm",computerName="computer_name",
username=user_with_administrative_priviliges,password=passwort
The msbuild community tasks includes an AppPoolController that appears to do what you want (though as noted it is dated and at present only supports IIS6.) An example:
<AppPoolController ApplicationPoolName="MyAppPool" Action="Restart" />
Note that you can also provide a username and password if necessary.
Edit: Just noticed that the MSBuild Extension Pack has an Iis7AppPool task that is probably more appropriate.
this is the fairly hackey workaround I ended up using:
1) Set up a limited-access account for your service to run as. Since I'm running a CruiseControl.NET service, I'll call my user 'ccnet'. He does NOT have admin rights.
2) Make a new local user account, and assign to the Administrators group (I'll call him 'iis_helper' for this example). Give him some password, and set it to never expire.
3) Change iis_helper's access permissions to NOT allow local login or remote desktop login, and anything else you might want to do to lock down this account.
4) Log in (either locally or through remote desktop) as your non-admin user, 'ccnet' in this example.
5) Open a command terminal, and use the 'runas' command to execute whatever it is that needs to be run escalated. Use the /savecred option. Specify your new administrative user.
runas /savecred /user:MYMACHINE\iis_helper "C:\Windows\System32\inetsrv\appcmd.exe"
The first time it will prompt you for 'iis_helper's password. After that, it will be stored thanks to the /savecred option (this is why we're running it once from a real command prompt, so we can enter the password once).
6) Assuming that command executed OK, you can now log out. I then logged back in as a local admin and turned off the 'ccnet' user for local interactive login, and remote desktop. The account is only used to run a service, but no real logins. This isnt a mandatory step.
7) Set up your service to run as your user account ('ccnet').
8) Configure whatever service is running (CruiseControl.NET in my case) to execute the 'runas' command instead of 'appcmd.exe' directly, the same as before:
replace:
"C:\Windows\System32\inetsrv\appcmd.exe" start site "My Super Site"
with:
runas /savecred /user:MYMACHINE\iis_helper "\"C:\Windows\System32\inetsrv\appcmd.exe\" start site \"My Super Site\""
The thing to note there is that the command should be in one set of quotes, with all the inner quotes escaped (slash-quote).
9) Test, call it a day, hit the local pub.
Edit: I apparently did #9 in the wrong order and had a few too many before testing...
This method also doesn't completely work. It does attempt to run as the administrative account, however it still runs as a non-escalated process under the administrative user, so still no admin permissions. I didn't initially catch the failure because the 'runas' command spawns a separate cmd window then closes right away, so I wasn't seeing the failure output.
Its starting to seem like the only real possibility might be writing a windows service that will run as admin, and its only purpose is to run appcmd.exe, then somehow call that service to start/stop IIS.
Isn't it great how UAC is there to secure things, but in actuality just unsecures more servers, because anything you want to do you have to do as admin, so its easier to just always run everything as admin and forget it?
You can try changing the Build Agent Service settings to log-on as a normal user account instead of SYSTEM (the default), this can be done from the services control panel (Start | Run | services.msc).
If it doesn't help, you can also try configuring the appcmd to always run elevated, refer to this document for details.
In case such option is not available for appcmd or it still doesn't work, you can disable UAC completely for this user.
Here you go. You can use this from CC.NET with NAnt or just with NAnt:
http://nantcontrib.sourceforge.net/release/latest/help/tasks/iisapppool.html
I am trying to save an image file in a custom module I am building for a DNN site.
However when I run the code I get an UnauthorizedAccessException.
if(upLoadAddImg.HasFile)
{
String imageLocation = ConfigurationManager.AppSettings["ImageFolderPath"];
//Upload file
upLoadAddImg.SaveAs(Server.MapPath(imageLocation));
}
I am running on localhost using the internal visual studio server. Tthe folderpath is all right and I have made sure Network Service has full permissions.
Am I missing something obvious or does DNN have some special permission setting I am missing?
If you are using the dev server in VS its identity is not Network Service by default. Most likely the directory you are saving to loccally is not allowed for the aspnet user - if you run this on a web site it should work at least code wise -------
To test it you can do one of two things make the portal directory open to everyone or set up a local site not run on the dev server ----