I'm having a lot of troubles trying to install and configure the IIS8 with MDS for SQL Server 2008 R2 SP2..
Now after a lot of problems solved, the web application for MDS is blowing me with this message:
Cannot open database "MDM_Sample" requested by the login.
What database is that? I have not found anything in Internet that could clarify where I could obtain this..
When running the MDS Configuration Manager, when they ask for the name of the database you must write 'MDM_SAMPLE'..
Related
I am working on a project with a friend and he has deployed a SQL Server database. He uses a PC and can access the database using Microsoft SQL Server Management Studio (SSMS).
However I have a Macbook with an M1 chip and so I cannot use SSMS and need to figure out which SQL Server application I want.
It seems like the way to go is Microsoft Azure Data Studio. I cannot figure out how to connect properly, I have looked at several solutions posted online which all say to download docker, download the latest SQL Server image, use SQL edge, run SQL Server in a container and then open Azure and connect.
One caveat is that all these tutorials end with creating a SQL Server on the local host rather than connecting to an existing one.
In Azure, after entering server id, username and password, there is a green dot on the label of the DB on the left drop down menu, indicating that the connection to the DB was successful. However whenever I try to view the DB's from the drop down it loads and then errors:
Object Explorer task didn't complete within 45 seconds
and I cannot run any basic queries either.
At this point I don't care what IDE I use as long as it works. Any advice is much appreciated. It seems like this task should be super easy but has given me such a hard time and we cannot continue working on the project until I get access.
Anyways, thanks again in advance! and lmk if there's any other info I should provide.
Tried using docker with Azure Data Studio and my results were the same as when I only used Azure.
You'll want to use Azure Data Studio.
You don't need Docker at all to meet your goals. Those tutorials were in regards to running your own SQL Server instance on a Mac. You're trying to connect to an existing instance.
As mentioned in the comments, where is the existing SQL Server instance located?...is it on a server that's part of a domain. Is your Mac part of that same domain? It sounds like you're getting some kind of timeout issue or some sort of authentication issue. So this is more of an infrastructure question.
Once connected to the SQL Server instance in Azure Data Studio, what happens if you just open a blank worksheet and run the query SELECT ##SERVERNAME?
I have looked everywhere on Stack Overflow and I have not found an answer that closely compares to my scenario, so please bear with me.
The issue is I was recently given a development server at work and I have to migrate my current project (which I have on SQL Server Management Studio running on SQL Server Express) so that it is hosted on that server. I was just given the server name and authorized access to it. So I can connect to it through Remote Desktop Connection (RDC), but I am clueless as to where to go from here.
I have tried going in through RDC and opening Management Studio from there but when plugging in my server name and using Windows Authentication it doesn't let me in. And I can't use SQL Server Authentication because I'd have to be actually in to be able to create an SQL login.
How can I connect to this server through Management Studio?
The server is in the same network? In the management studio, in server name, you can put a IP address or computer name.
Do you know if SQL is even installed on the server you are tasked to deploy to? You are able to "connect" to SQL Express locally because the instance is installed on your local machine. You will need an instance of SQL installed on the remote machine to be able to use SSMS to connect to the remote instance.
If you are attempting to connect to an already created DB that you have been using the credentials are the same, if you know the address and you have the ports opened on your computer to allow the connection. If you are going to start a new DB on the server, then you will have to connect via AD credentials IF your admin has given you the proper access. I personally suggest using AD credentials to create connections, it's just a lot more secure.
If you are trying to connect to the local db, then it should be on the drop down list on the log in screen.
You are going to have to talk with your admin who set it up if you are still having problems.
You might have to Enter your Server Details in the Hosts File on the Current Application Server
For Accessing Hosts File,
Go to Run and type drivers and Hit Enter. Go to the etc Folder and you will see hosts file in the Folder.
At the End of the File Enter the Server IP And Server Name
Save the file and try Logging into the Server Management Studio again
Hopefull, this would help
I just installed MS SQL Server 2012 (Express). I went through the whole install process from SQLManagementStudio_x64_ENU.exe (other things were already installed) with checking all the checkboxes, so I thought I had everything necessary.
When I try to connect to .\sqlexpress, I get a message saying "Cannot connect to .\sqlexpress". See below for message detail, I copied it from another question because mine is in Dutch :-)
Cannot connect to .\sqlexpress
I did some research through my friends Google and Stackoverflow, but none of the solutions work.
1. There is nothing in Database Engine -> Local Server Groups -> Register Local Servers (it says "No local servers of type "Database Engine" were found"
2. I cannot restart the services as I only have one "SQL related" service (SQL Server VSS Writer)
3. There are no services listed in Sql Server Configuration Manager -> SQL Server Services
Does anybody know what's wrong? Please let me know if you need additional details.
Thanks, a SQL Server newbie
The SQLManagementStudio_x64_ENU.exe as the name says only contains SQL Server Management Studio, which is the GUI used to manage servers. It does NOT includes any DB engine or anything else but the client tool, so it's normal that you don't have the service installed.
Look at the downloads at the official download website. The file named SQLEXPRADV_x64_ENU.exe or SQLEXPRADV_x86_ENU.exe are the full installs that includes both the client tools and database engine together. It's normally the best possible download I can think of from all the choices.
If I recall correct the file SQLManagementStudio_x64_ENU.exe only contains the management tools and not the server software. You need to download another file (SQLEXPRADV_x64_ENU.exe if you want the complete package with server and reporting services etc.).
See this page for more information
I assumed that you have completed whole installation process without any error.
It may possible that you have installed it with another instance name and possibly because of that you are getting this message.
Following thing you have to check.
Try to access on Same machine where you have installed SQL Server using Management studio.
Start menu or Search for SQL Server Configuration tool. At that tool you will find SQL server instance. name.
Make sure that your instance is running mode.
Which authentication mode you have choose during installation and take proper step during making connection
If above step will not work then please provide more detail.
You need to Download the SQL Server Express Edition with the Advanced Services option.
ADV - with advanced services (reporting services)
Good Afternoon,
I'm having difficulty running a report with a data source saved on the Report Server using credentials for a user I created on SQL Server named 'ReportUser'. Attempting to resolve this I've mapped the user to the 'ReportServer' database with the db_owner role as well as setting the default database to the 'ReportServer'. However, each time I attempt to run the report I receive the error message:
Cannot create a connection to data source 'Test'. Login failed for user 'ReportUser'.
I'm running SQL Server 2008 from my local machine and am able to successfully run the reports when I setup the datasource using Windows Authentication. Any idea on what could be causing the issues when attempting to use the SQL Authentication with the 'ReportUser'
Thank you very much for your help!
Thank you for your reply.
I believe I found the cause of my issue. Since this was a local install for testing purposes I just set up the instance of SQL Server with Windows Authentication. However, I made the mistake of not setting up the server for both Windows and SQL Authentication. The following link helped me resolve this.
http://forums.asp.net/t/1784261.aspx/1?Could+not+connect+to+database+login+failed+for+user+sa
After changing this setting and restarting the SQL Server everything appears to be running properly now.
I've just started work on a new computer in which I had to download all the software fresh.
I've just download a copy of SQL Server 2008 R2, and I'm trying to connect to SQL Server Management Studio without success. I vaguely remember last time I installed this, it asked me to choose between windows, or sql server authentication, however this didn't happen for this installation.
If I try to login via Windows Authentication (where the username and password fields are greyed out, localhost as server name) it gives the following error:
"A Network-related or instance
specific error occured while
establishing a connection to SQL
Server. The server was not found or
was not accessible. Verify that the
instance name is correct and that SQL
Server is configured to allow remote
connections. (provider: Named Pipes
Provider, error: 40 - Could not open a
connection to SQL Server) (Microsoft
SQL Server, Error: 2)"
I have checked everything in SQL Server Configuration Manager, and everything bar VIA is enabled.
If I try SQL Server Authentication, It asks me for a username and password which I definiately have not set yet. Also, under SQL Server Services in configuration manager, there is nothing there.
Any help would be appreciated :)
Thanks
PS: I don't know if it's worth mentioning but I am running Windows 7 as a virtual machine on a Mac.
Are you sure you have the correct instance name? If it was SQL Server 2008 R2 Express Edition then the default instance name is .\SQLEXPRESS.
Also if your using sql authentication to connect try running sql management studio as admin, if you are a limited user your identity might not be mapped to an account in sql server yet but i believe the Administrators user group is.
You need to check if your services are running.
Please type
net start mssqlserver
in your command prompt. Then try to login.
Ended up reinstalling completely and doing a fresh install from a fresh download. When I did this I was brought through the steps of selecting the default instance, and selecting authentication modes.
Working fine now :)
After checking tons of sites looking for an answer to this question, I think I have a simple solution.
Open the sql Server Configuration
Click on the sql server services node
Right Click on Sql server
Click Start.
I have been screwing around with this forever, and this simple method actually worked.