My project uses svn and I went git along time ago. I've been using git-svn for quite a while with a lot of success. But now at a new employeer, I'm having some problems.
The layout in SVN is:
http://path/to
/trunk/
submodule1
submodule2
/branches/
branch1
submodule1
branch2
submodule1
submodule2
I checked-out my git-svn to track each submodule (which I think is the right way to go).
git svn clone http://path/to/trunk/submodule1
git svn clone http://path/to/trunk/submodule2
Which gives me trunk, but I can't figure out how to track each branch. I want to think that --prefix would help me, I don't think that it will.
Anyone have ideas?
You should be able to achieve this using wildcards in your layout specification. I.e. for submodule1 you would do
git svn clone --trunk=trunk/submodule1
--branches=branches/*/submodule1 \
--tags=tags/*/submodule1 \
http://path/to
(assuming you also had tags following the same pattern). Repeat the same for the other submodules.
The --prefix option has nothing to do with this. It just controls how the branches will be named in the resultin git repository. Without the option, all branches will go straight under refs/remotes/. If you'd like something more like the usual remote branch layout, you can use e.g.
git svn clone --prefix=svn/ ...
to get refs/remotes/svn/trunk, refs/remotes/svn/branch1 etc. The value is prepended verbatim to the resulting branch names, so you need the trailing / or you'll end up with something like refs/remotes/svntrunk
Related
I'd like to move over a branch from an svn location and use it as the master in the github location. Can anyone tell how to do this?
You can follow this process by Tiago Rodrigues (trodrigues)
If you want to clone an svn repository with git-svn but don't want it to push all the existing branches, here's what you should do.
Clone with git-svn using the -T parameter to define your trunk path inside the svnrepo, at the same time instructing it to clone only the trunk:
git svn clone -T trunk http://example.com/PROJECT
If instead of cloning trunk you just want to clone a certain branch, do the same thing but change the path given to -T:
git svn clone -T branches/somefeature http://example.com/PROJECT
This way, git svn will think that branch is the trunk and generate the following config on your .git/config file:
[svn-remote "svn"]
url = https://example.com/
fetch = PROJECT/branches/somefeature:refs/remotes/trunk
If at any point after this you want to checkout additional branches, you first need to add it on your configuration file:
[svn-remote "svn"]
url = https://example.com/
fetch = PROJECT/branches/somefeature:refs/remotes/trunk
branches = PROJECT/branches/{anotherfeature}:refs/remotes/*
The branches config always needs a glob. In this case, we're just specifying just one branch but we could specify more, comma separating them, or all with a *.
After this, issue the following command:
git svn fetch
Sit back. It's gonna take a while, and on large repos it might even fail. Sometimes just hitting CTRL+C and starting over solves it. Some dark magic here.
After this, if you issue a git branch -r you can see your remote branch definitions:
git branch -r
anotherfeature
From there you can define a master branch, and push it to a GitHub repo:
git checkout -b master anotherfeature
git remote add origin https://github.com/user/arepo.git
git push -u origin master
If you insist on using git-svn, VonC already provided a good answer.
But for a one-time migration git-svn is not the right tool for conversions of repositories or parts of repositories. It is a great tool if you want to use Git as frontend for an existing SVN server, but for one-time conversions you should not use git-svn, but svn2git which is much more suited for this use-case.
There are plenty tools called svn2git, the probably best one is the KDE one from https://github.com/svn-all-fast-export/svn2git. I strongly recommend using that svn2git tool. It is the best I know available out there and it is very flexible in what you can do with its rules files.
You will be easily able to configure svn2gits rule file to produce the result you want from your current SVN layout, including any complex histories like yours that might exist and including producing several Git repos out of one SVN repo or combining different SVN repos into one Git repo cleanly in one run if you like.
If you are not 100% about the history of your repository, svneverever from http://blog.hartwork.org/?p=763 is a great tool to investigate the history of an SVN repository when migrating it to Git.
Even though git-svn or the nirvdrum svn2git is easier to start with, here are some further reasons why using the KDE svn2git instead of git-svn is superior, besides its flexibility:
the history is rebuilt much better and cleaner by svn2git (if the correct one is used), this is especially the case for more complex histories with branches and merges and so on
the tags are real tags and not branches in Git
with git-svn the tags contain an extra empty commit which also makes them not part of the branches, so a normal fetch will not get them until you give --tags to the command as by default only tags pointing to fetched branches are fetched also. With the proper svn2git tags are where they belong
if you changed layout in SVN you can easily configure this with svn2git, with git-svn you will loose history eventually
with svn2git you can also split one SVN repository into multiple Git repositories easily
or combine multiple SVN repositories in the same SVN root into one Git repository easily
the conversion is a gazillion times faster with the correct svn2git than with git-svn
You see, there are many reasons why git-svn is worse and the KDE svn2git is superior. :-)
I have a svn branch that I had been working on and decided to start using git-svn to work locally. Now I have two problems. I want to move my work into another svn repository (on the same host) but I'd first like to merge the latest work from trunk. How would I do this with git-svn? Also, how would I continue my work in a separate svn-repo while continually merging work from the original repo? Also, I don't want to checkout the entire history from the original trunk because the project is rather huge. I am new to git and to git-svn, though I've taken a crash course in git branching and I feel confident enough to use advanced commands like rebase and cherry-pick. I mainly need to know how to apply these concepts thru git-svn. Do the svn repos get setup as a git remote somehow? Are there good resources on the net explaining how it works? Any guidance is much appreciated.
Create your Git repo with git svn init -s <url>.
git config --edit, add several svn-remotes for each of your Subversion repos. Later you'll use the -R option to all git-svn commands to select which svn-remote to use.
Tweak svn-remote branch mappings as needed. Keep in mind that the default refs/remotes/* namespace specifies remote branches — not Git remotes. (You'll have just a single git remote named . which I don't recommend pushing/pulling to/from).
You can easily design your remote branches namespace to keep branches from different Subversion repos separated (e.g. refs/remotes/repoA/*, /refs/remotes/repoB/* etc).
git svn fetch. This has options to scan history only partially, e.g. starting from a specific revision. Please read the manpage on instructions how to do this.
You can also ignore specific paths and/or branches here.
Work with Git as usual, trying to keep your commits as linear as possible. Rebase often. Merge commits are fine (git-svn will even set svn:mergeinfo property), but holy cow be careful (and read the manpage for caveats). Understand that Git commits with git-svn-id tags are immutable, and push -f won't save you. For example, it's forbidden to amend or rebase already dcommit'ed changes.
Are there good resources on the net explaining how it works?
By far the best resource is the manpage. The next after it is git-svn source.
I am trying to work with GIT, without creating private branches.
What that means is I directly work on my cloned repository (master)
Now, Is that the right way to use GIT? I run into many issues related to updating my repository (GIT PULL / GIT FETCH). And most of the time, I am not able to use GIT Merge.
Is there a particular way in which i can use GIT MERGE, GIT PULL, and GIT FETCH. That will help me?
Looks like the best way to work with GIT is have branches.
Branch 1
GIT Commit
GIT PUSH
GIT MERGE master ( to fetch the newer changes)
Branch 2
GIT Commit
GIT PUSH
master
GIT Merge branch1
GIT Merge branch2
I dont think there any other way. Please correct me if i am wrong?
Jan Krueger's extended cheat sheet will help you cover the basics, and will expose you some common commands for using git.
IMO, git is a brilliant DVCS. If you have time; take a look at the structure of git and try to catch the ideas behind its design. For example this Tech Talk by Linus Torvalds.
Note: It looks like you are missing some core ideas behind using git, so please try to learn general approach of git before tackling with commands.
Note 2: As being a stalker, you seem to have general problems with git. So I repeat my advice once more. Learn basics, complete a tutorial, read/listen/watch a few useful source from notable people about git.
Also read about git stash. It saves your local uncommitted changes so you can pull cleanly. Then run git stash pop to replay those changes on top.
I am trying to use git svn to connect to our company repository. We have a slightly non-standard branches directory. How to access this using git svn has been discussed before, however, we seem to have a slight twist in our branch names that seems to keep me from getting them all.
Let's consider an example svn repo:
trunk/
tags/
branches/
rootbranch/
tku/subbranch
We have branches at the root level of the branches directory. But we have branches in nested folders, as well. The same goes for the tags dir, but I think that is just a second example of the same problem.
If I use git svn clone file:///tmp/gitsvn/svnrepo git-clone -s, I get only the root branches, as expected:
/tmp/gitsvn/git-clone$ git branch -r
rootbranch
tku
trunk
But if I clone using _git svn clone file:///tmp/gitsvn/svnrepo git-clone2 -b branches//_, I get only the sub-branches:
/tmp/gitsvn/git-clone2$ git branch -r
tku/subbranch
Is there a way to have both?
Additional branches can be accessed by adding multiple branches lines to the git-svn config.
In the .git/config file, there will be a section similar to the following:
[svn-remote "svn"]
url = http://server/svn
fetch = trunk:refs/remotes/trunk
branches = branches/*:refs/remotes/branches/*
tags = tags/*:refs/remotes/tags/*
Simply add another entry for the extra directory of branches. For example:
branches = branches/tku/*:refs/remotes/branches/tku/*
Then run git svn fetch to retrieve the branches from the svn repository.
I believe it's also possible to create this setup when constructing the git repository, using multiple -b options to the clone command.
git svn clone http://svn.foo.org/project -T trunk -b branches -b branches/tku -t tags
For anyone else who stumbles over this: it seems that having both is not possible. Subversion allows a mixed setup of branches, but it is discouraged, and so it seems okay that git does not support this. My solution was to bring all branches to the same level, then forget about the issue and move on. Having only one level of branches seems better anyway.
Is there any way to use git-svn to clone only some folders of an SVN repo structure. I'm trying to clone a repo that has some crazy big binary files and a number of subfolders that are just plain useless. I've tried using the --ignore-paths option, but my clone seemed to just stall out doing nothing for an extremely long time. Have any of you managed to make --ignore-paths work? I can't find much on the webs where anyone else is running into this. Maybe I'm the only one.
We've used the "ignore-paths" feature to ignore certain directories in a svn repo:
[svn-remote "svn"]
ignore-paths = ^(((branches|tags)/[^/]+|trunk)|)(huge/|mobile/)
This config ignores the "huge" and "mobile" subdirs of the repository in trunk, all branches and all tags.
Perhaps you can illustrate the structure of your Subversion repository to make it easier for us to suggest some solutions.
Are you trying to git svn clone the entire repository from the root-url? Have you tried cloning smaller parts of the repo, and then perhaps grafting several clones together?
The most success I've had here is to manually create branches in git that mirror the SVN remote repository when necessary. The process has been the following:
Update .git/config file with:
[svn-remote "svn-branch-alias"]
url = http://svn/branches/crazybranchname/craziername/url/
fetch = :refs/remotes/git-branch-name
From the command line type: git svn fetch 'svn-branch-alias' to collect the SVN branch data into your local git repo.
Then type: git checkout 'git-branch-name' to go into a headless mode.
Finally type: git checkout 'my-local-git-branch-name' to create move head to the latest submission in that branch and create a local branch alias you can use.
You can now commit and dcommit as usual and still switch between various local git branches and your manually created SVN mirrors using the usual mechanisms.