I attempts to setup IIS (version 6.0, windows 2003 server) sit in front of IBM WAS server so that it can route all specific traffic to IBM WebSphere application server. I've things setup on both UAT and pre-production IIS web server and its works just fine. The problem happens now, however, only in production server. I investigated the websphere plugin logs (defined in plugin-cfg.xml) and found the following errors
iisWASPlugin_http.dll Out-of-process ISAPI extension request failed.
Tried google the solution but no luck.
Setup procedures is summarized below
Install IBM Installation Manager
Install Web Server Plug-ins for IBM WebSphere Application Server and Version 8.5.0.0 through IBM Installation Manager
Copy Plugin-cfg.xml, Plugin-key.db, Plugin-key.sth from WAS to web server.
Configurate IIS web site - create virtual directory named sePlugins, Add ISAPI filter with iisWASPlugin_http.dl, add Web service extension
Create plugin-cfg.loc, paste the full path of plugin-cfg.xml to plugin-cfg.loc
The procedures above already working in UAT and pre-production environment.
Details setup procedures is exactly the same as the url below
http://pic.dhe.ibm.com/infocenter/wasinfo/v8r0/index.jsp?topic=%2Fcom.ibm.websphere.express.doc%2Finfo%2Fexp%2Fae%2Ftins_manualWebIIS.html
(Refer to "Configure IIS Version 6.0." section)
Note: IIS have "IIS 5.0 isolation mode" turned on.
Any help / hints is greatly appreciated.
Thanks in advance.
Regards.
The error gone after a server reboot...
Related
Hello Folks,
We are recently working on IBM worklight and what we want to try is:
We have two machine, one we want to set as server and other one is for my developer to build the app.
Currently we have installed Apache Tomcat server on the machine which we want to make as server. We even have IBM Worklight installed on it. Now What I want to achieve is to deploy the app from other machine to this server. But I am not able to set up the things properly.
Things done so far:
Installed Apache Tomcat server software on a machine (server)
Installed IBM Installation Manager
I am not getting how will I set up the Worklight Server on this machine. Can anyone provide some information?
You cannot directly deploy from Worklight Studio (the Eclipse plug-in) to a remote Worklight Server.
The steps you need to take are:
Setup your application for a remote server, via the Build Settings and Deploy Target window
Build the app
Take the .wlapp/.adapter file and deploy it to the remote Worklight Server via it's Worklight Console
If you have done any server-related changes (authenticationConfig.xml, Java code, ...) you will need to first deploy the project's .war file to the application server that hosts the remote Worklight Server, and then the .wlapp.
We are trying to configure continuous integration with TFS 2012. While queuing a new build, the publish fails with the error:
Build FAILED.
"C:\src\ProjectName.sln" (default target) (1) ->
"C:\src\Website\ProjectName.csproj" (default target) (2) ->
(MSDeployPublish target) ->
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\Web\Microsoft.Web.Publishing.targets(4377,5): msdeploy error ERROR_COULD_NOT_CONNECT_TO_REMOTESVC: Web deployment task failed. (Could not connect to the remote computer ("ServerName") using the specified process ("Web Management Service") because the server did not respond. Make sure that the process ("Web Management Service") is started on the remote computer. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_COULD_NOT_CONNECT_TO_REMOTESVC)**
I checked all the points mentioned in the IIS.NET documentation for this error. Both services mentioned, Web Management Service and Web Deployment Agent Service, are running fine. A restart of those services has no change in behavior.
Windows Server 2008 R2 with IIS 7.
Web Deployment Agent Service is running on port 8172.
Web Deploy 3.0
Windows Firewall is not blocking any port on the server.
How can this be fixed?
If you install Web Deploy 3.x BEFORE Web Management Tools are installed, you'll have to re-install Web Deploy. I beat my head against the wall for hours on this.
Install the Web Management Services ("Turn Windows Features On/Off"/Roles -> Web Server -> Management Tools -> Management Service)
Then uninstall Web Deploy (repair didn't work) via the usual Add/Remove Programs control panel
Install Web Deploy 3.x again using Web Platform Installer.
Fixed. /Sigh
Double check in your Web Deploy settings that the name of the website is exactly that of what's in IIS.
Ben Day blogged more about it.
Fix that i saw on another website:
Fix it by adding “http://” to server.
In other words, when server is www.xxxx.com would get the 403 error, but when server is http://www.xxxx.com, then it works.
You need also to indicate the app name e.g 'Default Web Site/MyApp'
That was my error. Once I added /MyApp, it worked.
I got this error when using msdeploy, not TFS. In my case I needed to make sure the user msdeploy is using had permission to deploy to the website.
Find the website in IIS manager, right click and go to Deploy, then Configure Web Deploy Publishing. Find the user used by Web Deploy and setup for this website.
In my case the Internet proxy was enabled on source - which made msdeploy to reach out to internet instead of local ICN.
You should check the logs on your IIS first - see that you actually get to the server, and then you can locate the exact error here - https://support.microsoft.com/en-us/help/943891/the-http-status-code-in-iis-7-0-iis-7-5-and-iis-8-0
Uninstalling and re-installing (not repairing!) after setting up IIS did most of the magic for me.
There is another possible cause of the error. IIS Managemente Service have its own configuration for IP Address Restrictions, which default value is Deny Access for unspecified clients (Windows Server 2012 R2 with IIS 8.5).
You must set this value to Allow or add access to your specific IP address/IP address range using the Allow... button.
Remember, you must Stop the Management Service previously to change this configuration.
I am running Worklight Studio 6 from Worklight Enterprise Edition download with Eclipse Juno.
My application is using form security with the WASLTPA login module. The application tests correctly.
When I add AppAuthenticity (needed for device provisioning) my client sees the following error in the console. (None in the server log)
Failed to load resource: the server responded with a status of 401 (Unauthorized)
drilling deeper I see:
/*-secure-
{"challenges":{"wl_authenticityRealm":{"WL-Challenge-Data":"o97e2ph8kguqh1vpljbio1o5k3+23.507-9.852-31.807 "}}}*/
I am running this on the Worklight Development Server packaged with Worklight Studio.
You have mentioned both the Enterprise Edition and Developer Edition.
Please clarify your question with the following: You have installed Worklight using the IBM Installation Manager, yes?
You have an application server (Tomcat/WebSphere/Liberty) installed and you've used the supplied Ant scripts to create the Worklight database(s), configure them, deploy the Worklight platform files to the application server, as well as deploy your project's .war file? (and of course the .wlapp /.adapter file(s)...).
If you have done the above, then you will have in your Worklight Server, now installed on the application server, the required components for App Authenticity to work.
Then there is the case of how you actually configured your project for App Authenticity.
Make sure you follow these steps to set up App Authenticity
When trying to launch solution, I receive the following error:
error : The Web Application Project MyApp is configured to use IIS. The Web server 'http://localhost:64646/' could not be found.
How do I resolve this issue?
I opened IIS and set the TCP port on the Default Web Site to 64646 and the project loaded without error.
You need to install IIS on your development machine.
Using IIS you'll also need to run Visual Studio in Admin Mode as well.
It is recommended that you use IIS Express since it will allow you to run VS without Admin privileges.
You have to install IIS and create the web site in IIS with the matching port number. Someone else created the visual studio web project to use IIS and configured it on their computer. Each person who opens the solution has to have all the websites configured in IIS manually.
You might consider creating a script that auto-creates them in the source repository. You can do it using AppCmd.exe (ADD SITE, ADD APPPOOL, LIST APPPOOL, LIST SITE) (%windir%\system32\inetsrv\AppCmd.exe).
Using Web Deploy I am having problems creating a import server or site package. There appears to be no documentation on this. I am using Windows 7 and IIS 7.5, Web Deploy 2.0.
I want to be able to create a deployment package to include the App Pool and Website information so can be installed at the root of IIS without having to manually create anything.
The article Synchronizing by using Packages details the basic Web Deploy steps for creating a site or server package and then importing it on another server. If you want to package and deploy an IIS 7 Web server, you'd use the webServer provider. If you want to package and deploy an IIS 7 website, you'd use the appHostConfig provider.
To include the app pool in the operation, you'll need to use the -enableLink:AppPoolExtension switch, like this:
msdeploy -verb:sync -source:appHostConfig="Default Web Site" -dest:appHostConfig="Default Web Site",computerName=Server2 -enableLink:AppPoolExtension
For more on the enableLink setting, see Web Deploy Operation Settings. For more on link extensions, see the Web Deploy Link Extensions page.