I am using below self join query as Lookup override in informatica. This is running fine in teradata.
SELECT A.region_cd AS REGION_CODE,
A.enp_no AS ENP_NBR,
B.sla_cd AS SLA_CODE
FROM edb_man_work.emp A,
edb_man_work.emp B
WHERE A.company_no = Trim(Cast(B.enp_no AS INTEGER))
AND A.region_cd = B.region_cd
This is running fine in teradata but while running in mapping it is giving error
as Column SLA_CD is ambiguous.
I am not sure why this is giving this type of error.
Since you're using multiple source tables, make sure you end the Lookup SQL override with --.
If you look at the session log, you'll see that Informatica automatically appends Lookup SQL overrides with an ORDER BY statement. Adding the -- will comment out this addition.
SELECT A.region_cd AS REGION_CODE,
A.enp_no AS ENP_NBR,
B.sla_cd AS SLA_CODE
FROM edb_man_work.emp A,
edb_man_work.emp B
WHERE A.company_no = Trim(Cast(B.enp_no AS INTEGER))
AND A.region_cd = B.region_cd
--
Related
I'm trying to select columns from two tables, Lignes and Détail Production. Détail Production links to the first one with the key NoLigne (which is the same name in both tables).
I know that I have to put [ ] or `` around the table's name, but I'm having the error No value given for one or more required parameters, which I believe means that SQL doesn't recognize the name. I tried aliasing the name of the table having a space in its name, but I have the same error. Here is my code:
SELECT
NoProduction,
Quantite,
DateMaxProd,
Lignes.Référence
FROM
[Détail Production] AS D
INNER JOIN
Lignes ON D.NoLigne = Lignes.NoLigne
WHERE
D.Soldee = 0 AND
D.EtatLigne = 0 AND
Lignes.Soldee = 0 AND
(QteRecue - Quantite - Acompter * NbHS)>0
Unfortunately, I can't get rid of the alias or the name of the table in the FROM and WHERE clause because my tables share columns with the same name. I can't rename the tables or the columns, and I'm actually using the software Windev which uses HFSQL as a dbms. I'm trying to connect to an access database with the OLEDB connector, and when I switch to HFSQL it works.
Here is a mre:
SELECT
*
FROM
[Détail Production]
INNER JOIN
Lignes ON [Détail Production].NoLigne = Lignes.NoLigne
When using HFSQL database, it works, when using OLEDB with an access database, it throws the error No value given for one or more required parameter
Thanks for your help.
I found the problem:
SELECT
D.NoProduction,
D.Quantite,
D.DateMaxProd,
Lignes.Référence
FROM
[Détail Production] AS D
INNER JOIN
Lignes ON D.NoLigne = Lignes.NoLigne
WHERE
D.Soldee = 0 AND
D.EtatLigne = 0 AND
Lignes.Soldee = 0 AND
(D.QteRecue - D.Quantite - D.Acompter * D.NbHS) > 0
I was missing the comparison on the last condition of the WHERE clause. I thought it was because of the alias or the brackets because others online had similar problems and the error changed as I tried other ways of writing the FROM clause. The right way to write a name with spaces in HFSQL is with brackets [ ]. Also, there were problems with names not matching accents from the database.
I'm afraid that if a bunch of folks start running my actual code I'll be billed for the queries so my example code is for a fake database.
I've successfully established my connection to BigQuery:
con <- dbConnect(
bigrquery::bigquery(),
project = 'myproject',
dataset = 'dataset',
billing = 'myproject'
)
Then performed a LEFT JOIN using the coalesce function:
dbGetQuery(con,
"SELECT
`myproject.dataset.table_1x`.Pokemon,
coalesce(`myproject.dataset.table_1`.Type_1,`myproject.dataset.table_2`.Type_1) AS Type_1,
coalesce(`myproject.dataset.table_1`.Type_2,`myproject.dataset.table_2`.Type_2) AS Type_2,
`myproject.dataset.table_1`.Total,
`myproject.dataset.table_1`.HP,
`myproject.dataset.table_1`.Attack,
`myproject.dataset.table_1`.Special_Attack,
`myproject.dataset.table_1`.Defense,
`myproject.dataset.table_1`.Special_Defense,
`myproject.dataset.table_1`.Speed,
FROM `myproject.dataset.table_1`
LEFT JOIN `myproject.dataset.table_2`
ON `myproject.dataset.table_1`.Pokemon = `myproject.dataset.table_2`.Pokemon
ORDER BY `myproject.dataset.table_1`.ID;")
The JOIN produced the table I intended and now I'd like to query that table but like...where is it? How do I connect? Can I save it locally so that I can start working my analysis in R? Even if I go to BigQuery, select the Project History tab, select the query I just ran in RStudio, and copy the Job ID for the temporary table, I still get the following error:
Error: Job 'poke-340100.job_y0IBocmd6Cpy-irYtNdLJ-mWS7I0.US' failed
x Syntax error: Unexpected string literal 'poke-340100:US.bquxjob_7c3a7664_17ed44bb4ae' at [2:6] [invalidQuery]
Run `rlang::last_error()` to see where the error occurred.
And if I follow up:
Run `rlang::last_error()` to see where the error occurred.
> rlang::last_error()
<error/rlang_error>
Job 'poke-340100.job_y0IBocmd6Cpy-irYtNdLJ-mWS7I0.US' failed
x Syntax error: Unexpected string literal 'poke-340100:US.bquxjob_7c3a7664_17ed44bb4ae' at [2:6] [invalidQuery]
Backtrace:
1. DBI::dbGetQuery(con, "SELECT *\nFROM 'poke-340100:US.bquxjob_7c3a7664_17ed44bb4ae'\nWHERE Type_1 IS NULL;")
2. DBI::dbGetQuery(con, "SELECT *\nFROM 'poke-340100:US.bquxjob_7c3a7664_17ed44bb4ae'\nWHERE Type_1 IS NULL;")
3. DBI:::.local(conn, statement, ...)
5. bigrquery::dbSendQuery(conn, statement, ...)
6. bigrquery:::BigQueryResult(conn, statement, ...)
7. bigrquery::bq_job_wait(job, quiet = conn#quiet)
Run `rlang::last_trace()` to see the full context.
> rlang::last_trace()
<error/rlang_error>
Job 'poke-340100.job_y0IBocmd6Cpy-irYtNdLJ-mWS7I0.US' failed
x Syntax error: Unexpected string literal 'poke-340100:US.bquxjob_7c3a7664_17ed44bb4ae' at [2:6] [invalidQuery]
Backtrace:
x
1. +-DBI::dbGetQuery(con, "SELECT *\nFROM 'poke-340100:US.bquxjob_7c3a7664_17ed44bb4ae'\nWHERE Type_1 IS NULL;")
2. \-DBI::dbGetQuery(con, "SELECT *\nFROM 'poke-340100:US.bquxjob_7c3a7664_17ed44bb4ae'\nWHERE Type_1 IS NULL;")
3. \-DBI:::.local(conn, statement, ...)
4. +-DBI::dbSendQuery(conn, statement, ...)
5. \-bigrquery::dbSendQuery(conn, statement, ...)
6. \-bigrquery:::BigQueryResult(conn, statement, ...)
7. \-bigrquery::bq_job_wait(job, quiet = conn#quiet)
Can someone please explain? Is it just that I can't query a temporary table with the bigrquery package?
From looking at the documentation here and here, the problem might just be that you did not assign the results anywhere.
local_df = dbGetQuery(...
should take the results from your database query and copy them into local R memory. Take care as there is no check for the size of the results, so it is easy to run out of memory in when doing this.
You have tagged the question with dbplyr, but it looks like you are just using the DBI package. If you want to be writing R and have it translated to SQL, then you can do this using dbplyr. It would look something like this:
con <- dbConnect(...) # your connection details here
remote_tbl1 = tbl(con, from = "table_1")
remote_tbl2 = tbl(con, from = "table_2")
new_remote_tbl = remote_tbl1 %>%
left_join(remote_tbl2, by = "Pokemon", suffix = c("",".y")) %>%
mutate(Type_1 = coalesce(Type_1, Type_1.y),
Type_2 = coalesce(Type_2, Type_2.y)) %>%
select(ID, Pokemon, Type_1, Type_2, ...) %>% # list your return columns
arrange(ID)
When you use this approach, new_remote_tbl can be thought of as a new table in the database which you can query and manipulate further. (It is not actually a table - no data was saved to disc - but you can query it and interact with it as if it were and the database will produce it for you on demand).
There are some limitations of working with a remote table (the biggest is you are limited to commands that dbplyr can translate into SQL). When you want to copy the current remote table into local R memory, use collect:
local_df = remote_df %>%
collect()
I have the following select statement in ABAP:
SELECT munic~mandt VREFER BIS AB ZZELECDATE ZZCERTDATE CONSYEAR ZDIMO ZZONE_M ZZONE_T USAGE_M USAGE_T M2MC M2MT M2RET EXEMPTMCMT EXEMPRET CHARGEMCMT
INTO corresponding fields of table GT_INSTMUNIC_F
FROM ZCI00_INSTMUNIC AS MUNIC
INNER JOIN EVER AS EV on
MUNIC~POD = EV~VREFER(9).
"where EV~BSTATUS = '14' or EV~BSTATUS = '32'.
My problem with the above statement is that does not recognize the substring/offset operation on the 'ON' clause. If i remove the '(9) then
it recognizes the field, otherwise it gives error:
Field ev~refer is unknown. It is neither in one of the specified tables
nor defined by a "DATA" statement. I have also tried doing something similar in the 'Where' clause, receiving a similar error:
LOOP AT gt_instmunic.
clear wa_gt_instmunic_f.
wa_gt_instmunic_f-mandt = gt_instmunic-mandt.
wa_gt_instmunic_f-bis = gt_instmunic-bis.
wa_gt_instmunic_f-ab = gt_instmunic-ab.
wa_gt_instmunic_f-zzelecdate = gt_instmunic-zzelecdate.
wa_gt_instmunic_f-ZZCERTDATE = gt_instmunic-ZZCERTDATE.
wa_gt_instmunic_f-CONSYEAR = gt_instmunic-CONSYEAR.
wa_gt_instmunic_f-ZDIMO = gt_instmunic-ZDIMO.
wa_gt_instmunic_f-ZZONE_M = gt_instmunic-ZZONE_M.
wa_gt_instmunic_f-ZZONE_T = gt_instmunic-ZZONE_T.
wa_gt_instmunic_f-USAGE_M = gt_instmunic-USAGE_M.
wa_gt_instmunic_f-USAGE_T = gt_instmunic-USAGE_T.
temp_pod = gt_instmunic-pod.
SELECT vrefer
FROM ever
INTO wa_gt_instmunic_f-vrefer
WHERE ( vrefer(9) LIKE temp_pod ). " PROBLEM WITH SUBSTRING
"AND ( BSTATUS = '14' OR BSTATUS = '32' ).
ENDSELECT.
WRITE: / sy-dbcnt.
WRITE: / 'wa is: ', wa_gt_instmunic_f.
WRITE: / 'wa-ever is: ', wa_gt_instmunic_f-vrefer.
APPEND wa_gt_instmunic_f TO gt_instmunic_f.
WRITE: / wa_gt_instmunic_f-vrefer.
ENDLOOP.
itab_size = lines( gt_instmunic_f ).
WRITE: / 'Internal table populated with', itab_size, ' lines'.
The basic task i want to implement is to modify a specific field on one table,
pulling values from another. They have a common field ( pod = vrefer(9) ). Thanks in advance for your time.
If you are on a late enough NetWeaver version, it works on 7.51, you can use the OpenSQL function LEFT or SUBSTRING. Your query would look something like:
SELECT munic~mandt VREFER BIS AB ZZELECDATE ZZCERTDATE CONSYEAR ZDIMO ZZONE_M ZZONE_T USAGE_M USAGE_T M2MC M2MT M2RET EXEMPTMCMT EXEMPRET CHARGEMCMT
FROM ZCI00_INSTMUNIC AS MUNIC
INNER JOIN ever AS ev
ON MUNIC~POD EQ LEFT( EV~VREFER, 9 )
INTO corresponding fields of table GT_INSTMUNIC_F.
Note that the INTO clause needs to move to the end of the command as well.
field(9) is a subset operation that is processed by the ABAP environment and can not be translated into a database-level SQL statement (at least not at the moment, but I'd be surprised if it ever will be). Your best bet is either to select the datasets separately and merge them manually (if both are approximately equally large) or pre-select one and use a FAE/IN clause.
They have a common field ( pod = vrefer(9) )
This is a wrong assumption, because they both are not fields, but a field an other thing.
If you really need to do that task through SQL, I'll suggest you to check native SQL sentences like SUBSTRING and check if you can manage to use them within an EXEC_SQL or (better) the CL_SQL* classes.
Hi I am trying to migrate an access database into postgresql and everything was going well until i tried this view. I am wanting it to create a new column called 'CalculatedHours'. And as Im new to postgresql I am slightly confused. Heres the code that I keep putting into pgAdmin and getting the error...
SELECT "SessionsWithEnrolmentAndGroups"."SessionID",
"Assignments"."Staff",
"SessionsWithEnrolmentAndGroups"."groups",
"SessionsWithEnrolmentAndGroups"."SessionQty",
"SessionsWithEnrolmentAndGroups"."Hours",
"SessionsWithEnrolmentAndGroups"."Weeks",
"Assignments"."Percentage",
"Assignments"."AdditionalHours",
Round((coalesce(("groups"),1)*("SessionQty")*("Hours")*("Weeks")
*("Percentage"))) AS CalculatedHours,
(CalculatedHours)+coalesce(("AdditionalHours"),0) AS "TotalHours"
FROM "SessionsWithEnrolmentAndGroups"
INNER JOIN "Assignments"
ON "SessionsWithEnrolmentAndGroups"."SessionID" = "Assignments"."SessionID";
You cannot access column aliases in the same select where they are defined. I would suggest a subquery:
SELECT t.*,
(CalculatedHours)+coalesce(("AdditionalHours"), 0) AS "TotalHours"
FROM (SELECT eag."SessionID", a, eag."groups", eag."SessionQty",
eag."Hours", eag."Weeks", a."Percentage", a."AdditionalHours",
Round((coalesce(("groups"),1)*("SessionQty")*("Hours")*("Weeks")*("Percentage"))) AS CalculatedHours
FROM "SessionsWithEnrolmentAndGroups" eag INNER JOIN
"Assignments" a
ON eag."SessionID" = a."SessionID"
) t;
Your queries would also be much more readable using table aliases and getting rid of the escape characters (double quotes) unless they are really, really needed.
This is my sql command:
select INCOME_TYPE_ID,
REGION_CODE,
FIN_YEAR_CODE,
PORTION_AMOUNT
from INCOME.INCOME_TYPE,
COMMON.REGION,
INCOME.RECEIVE_DOC_PORTION,
INCOME.ASSESS_ORDER_ITEM,
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC,
ACCOUNTING.VOUCHER_ITEM,
ACCOUNTING.VOUCHER,
ACCOUNTING.FIN_YEAR
where INCOME.RECEIVE_DOC_PORTION.ASSESS_ORDER_ITEM_ID = INCOME.ASSESS_ORDER_ITEM.ASSESS_ORDER_ITEM_ID
and INCOME.ASSESS_ORDER_ITEM.INCOME_TYPE_ID=INCOME.INCOME_TYPE.INCOME_TYPE_ID
and INCOME.RECEIVE_DOC_PORTION.RECEIVE_DOC_PORTION_ID = ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.RECEIVE_DOC_PORTION_ID
and ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.VOUCHER_ITEM_ID = ACCOUNTING.VOUCHER_ITEM.VOUCHER_ITEM_ID
and ACCOUNTING.VOUCHER_ITEM.VOUCHER_ID = ACCOUNTING.VOUCHER.VOUCHER_ID
and ACCOUNTING.VOUCHER.REGION_CODE = COMMON.REGION.REGION_CODE
and ACCOUNTING.VOUCHER.FIN_YEAR_CODE = ACCOUNTING.FIN_YEAR.FIN_YEAR_CODE
and I got this error:
Ambiguous Columns Defined
I'm Using SQL Developer as Oracle client.
Apparently one (or more) column names in your select list exists in more than one table of the FROM list.
You need to prefix every column in the SELECT list with the table it's coming from (it's also a good practice to always do that, regardless of the fact if they are ambigous)
Mention name of table before every column in select query.
Ambiguous column means that you have more than one column with the same name in one of the SELECT statements.
Try this instead, prefgixing all selected columns with their fully qualified names (as you have done elsewhere in your SELECT):
select INCOME.INCOME_TYPE.INCOME_TYPE_ID,
COMMON.REGION.REGION_CODE,
ACCOUNTING.FIN_YEAR.FIN_YEAR_CODE,
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.PORTION_AMOUNT
from INCOME.INCOME_TYPE,
COMMON.REGION,
INCOME.RECEIVE_DOC_PORTION,
INCOME.ASSESS_ORDER_ITEM,
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC,
ACCOUNTING.VOUCHER_ITEM,
ACCOUNTING.VOUCHER,
ACCOUNTING.FIN_YEAR
where INCOME.RECEIVE_DOC_PORTION.ASSESS_ORDER_ITEM_ID = INCOME.ASSESS_ORDER_ITEM.ASSESS_ORDER_ITEM_ID
and INCOME.ASSESS_ORDER_ITEM.INCOME_TYPE_ID = INCOME.INCOME_TYPE.INCOME_TYPE_ID
and INCOME.RECEIVE_DOC_PORTION.RECEIVE_DOC_PORTION_ID = ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.RECEIVE_DOC_PORTION_ID
and ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.VOUCHER_ITEM_ID = ACCOUNTING.VOUCHER_ITEM.VOUCHER_ITEM_ID
and ACCOUNTING.VOUCHER_ITEM.VOUCHER_ID = ACCOUNTING.VOUCHER.VOUCHER_ID
and ACCOUNTING.VOUCHER.REGION_CODE = COMMON.REGION.REGION_CODE
and ACCOUNTING.VOUCHER.FIN_YEAR_CODE = ACCOUNTING.FIN_YEAR.FIN_YEAR_CODE
I had to guess the filly qualified name for
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.PORTION_AMOUNT
It might be
INCOME.RECEIVE_DOC_PORTION.PORTION_AMOUNT
But you should be able to resolve that easily.
Hope it helps...