Related
In an extract I am dealing with, I have 2 datetime columns. One column stores the dates and another the times as shown.
How can I query the table to combine these two fields into 1 column of type datetime?
Dates
2009-03-12 00:00:00.000
2009-03-26 00:00:00.000
2009-03-26 00:00:00.000
Times
1899-12-30 12:30:00.000
1899-12-30 10:00:00.000
1899-12-30 10:00:00.000
You can simply add the two.
if the Time part of your Date column is always zero
and the Date part of your Time column is also always zero (base date: January 1, 1900)
Adding them returns the correct result.
SELECT Combined = MyDate + MyTime FROM MyTable
Rationale (kudos to ErikE/dnolan)
It works like this due to the way the date is stored as two 4-byte
Integers with the left 4-bytes being the date and the right
4-bytes being the time. Its like doing $0001 0000 + $0000 0001 =
$0001 0001
Edit regarding new SQL Server 2008 types
Date and Time are types introduced in SQL Server 2008. If you insist on adding, you can use Combined = CAST(MyDate AS DATETIME) + CAST(MyTime AS DATETIME)
Edit2 regarding loss of precision in SQL Server 2008 and up (kudos to Martin Smith)
Have a look at How to combine date and time to datetime2 in SQL Server? to prevent loss of precision using SQL Server 2008 and up.
If the time element of your date column and the date element of your time column are both zero then Lieven's answer is what you need. If you can't guarantee that will always be the case then it becomes slightly more complicated:
SELECT DATEADD(day, 0, DATEDIFF(day, 0, your_date_column)) +
DATEADD(day, 0 - DATEDIFF(day, 0, your_time_column), your_time_column)
FROM your_table
This is an alternative solution without any char conversions:
DATEADD(ms, DATEDIFF(ms, '00:00:00', [Time]), CONVERT(DATETIME, [Date]))
You will only get milliseconds accuracy this way, but that would normally be OK. I have tested this in SQL Server 2008.
This worked for me
CAST(Tbl.date as DATETIME) + CAST(Tbl.TimeFrom AS TIME)
(on SQL 2008 R2)
If you're not using SQL Server 2008 (i.e. you only have a DateTime data type), you can use the following (admittedly rough and ready) TSQL to achieve what you want:
DECLARE #DateOnly AS datetime
DECLARE #TimeOnly AS datetime
SET #DateOnly = '07 aug 2009 00:00:00'
SET #TimeOnly = '01 jan 1899 10:11:23'
-- Gives Date Only.
SELECT DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly))
-- Gives Time Only.
SELECT DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
-- Concatenates Date and Time parts.
SELECT
CAST(
DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly)) + ' ' +
DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
as datetime)
It's rough and ready, but it works!
If both of your fields are datetime then simply adding those will work.
eg:
Declare #d datetime, #t datetime
set #d = '2009-03-12 00:00:00.000';
set #t = '1899-12-30 12:30:00.000';
select #d + #t
If you used Date & Time datatype then just cast the time to datetime
eg:
Declare #d date, #t time
set #d = '2009-03-12';
set #t = '12:30:00.000';
select #d + cast(#t as datetime)
This was my solution which ignores the date value of the time column
CAST(Tbl.date as DATETIME) + CAST(CAST(Tbl.TimeFrom AS TIME) as DATETIME)
Hope this helps others
Convert the first date stored in a datetime field to a string, then convert the time stored in a datetime field to string, append the two and convert back to a datetime field all using known conversion formats.
Convert(datetime, Convert(char(10), MYDATETIMEFIELD, 103) + ' ' + Convert(char(8), MYTIMEFIELD, 108), 103)
Convert both field into DATETIME :
SELECT CAST(#DateField as DATETIME) + CAST(#TimeField AS DATETIME)
and if you're using Getdate() use this first:
DECLARE #FechaActual DATETIME = CONVERT(DATE, GETDATE());
SELECT CAST(#FechaActual as DATETIME) + CAST(#HoraInicioTurno AS DATETIME)
I had many errors as stated above so I did it like this
try_parse(concat(convert(date,Arrival_date),' ',arrival_time) as datetime) AS ArrivalDateTime
It worked for me.
Finding this works for two dates where you want time from one and date from the other:
declare #Time as datetime = '2021-11-19 12:34'
declare #Date as datetime = '2021-10-10'
SELECT #time + datediff(day, #Time, #Date)
DECLARE #Dates table ([Date] datetime);
DECLARE #Times table ([Time] datetime);
INSERT INTO #Dates VALUES('2009-03-12 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-26 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-30 00:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 12:30:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
WITH Dates (ID, [Date])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Date]), [Date] FROM #Dates
), Times (ID, [Time])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Time]), [Time] FROM #Times
)
SELECT Dates.[Date] + Times.[Time] FROM Dates
JOIN Times ON Times.ID = Dates.ID
Prints:
2009-03-12 10:00:00.000
2009-03-26 10:00:00.000
2009-03-30 12:30:00.000
To combine date from a datetime column and time from another datetime column this is the best fastest solution for you:
select cast(cast(DateColumn as date) as datetime) + cast(TimeColumn as datetime) from YourTable
SELECT CAST(CAST(#DateField As Date) As DateTime) + CAST(CAST(#TimeField As Time) As DateTime)
Another way is to use CONCATand CAST, be aware, that you need to use DATETIME2(x) to make it work. You can set x to anything between 0-7 7 meaning no precision loss.
DECLARE #date date = '2018-03-12'
DECLARE #time time = '07:00:00.0000000'
SELECT CAST(CONCAT(#date, ' ', #time) AS DATETIME2(7))
Returns 2018-03-12 07:00:00.0000000
Tested on SQL Server 14
simply concatenate both , but cast them first as below
select cast(concat(Cast(DateField as varchar), ' ', Cast(TimeField as varchar)) as datetime) as DateWithTime from TableName;
select s.SalesID from SalesTbl s
where cast(cast(s.SaleDate as date) as datetime) + cast(cast(s.SaleCreatedDate as time) as datetime) between #FromDate and #ToDate
The existing answers do not address the datetime2 datatype so I will add mine:
Assuming that you want to add a time value to a datetime2 value where:
The datetime2 value could contain non-zero time component and/or fractional seconds
The time value could contain the value 23:59:59.9999999 which is 86,399.9999999 seconds, 86,399,999,999.9 microseconds or 86,399,999,999,900 nanoseconds¹
Due to the limitations of dateadd function¹ you must add them in two steps:
Convert the time value to seconds and use dateadd(second, ...)
Extract the nanoseconds from the time value and use dateadd(nanosecond, ...) to add them to the date calculated above
declare #dv datetime2 = '2000-01-01 12:34:56.7890123';
declare #tv time = '23:59:59.9999999';
select dateadd(
nanosecond,
datepart(nanosecond, #tv),
dateadd(
second,
datepart(hour, #tv) * 60 * 60 + datepart(minute, #tv) * 60 + datepart(second, #tv),
#dv
)
);
-- 2000-01-02 12:34:56.7890122
¹ Nanosecond values might not fit in int datatype which dateadd function expects.
SELECT CAST(your_date_column AS date) + CAST(your_time_column AS datetime) FROM your_table
Works like a charm
I ran into similar situation where I had to merge Date and Time fields to DateTime field. None of the above mentioned solution work, specially adding two fields as the data type for addition of these 2 fields is not same.
I created below solution, where I added hour and then minute part to the date. This worked beautifully for me. Please check it out and do let me know if you get into any issues.
;with tbl
as
(
select StatusTime = '12/30/1899 5:17:00 PM', StatusDate = '7/24/2019 12:00:00 AM'
)
select DATEADD(MI, DATEPART(MINUTE,CAST(tbl.StatusTime AS TIME)),DATEADD(HH, DATEPART(HOUR,CAST(tbl.StatusTime AS TIME)), CAST(tbl.StatusDate as DATETIME)))
from tbl
Result: 2019-07-24 17:17:00.000
A shift in our plant is defined as starting at 4am and continues until 2 am on the following day.
At 3 am on a given day I want to get all the records for the previous shift.
The query below gets me the previous day upto now but also includes 12am to 2 am on the "previous previous" shift. How do i get the query to get data ONLY after 4am ?
select
*
from yourTable
WHERE TimeStamp >= dateadd(day,datediff(day,1,GETDATE()),0)
DECLARE #yesterday DATE = GETDATE()-1
DECLARE #time TIME = '04:00:00'
DECLARE #shiftstart DATETIME = CAST(#yesterday AS DATETIME) + CAST(#time AS DATETIME)
select
*
from yourTable
WHERE TimeStamp >= #shiftstart
The logic is to subtract 2 hours from the shift time and use the date portion. A simplistic implementation is:
where cast(dateadd(hour, -2, TimeStamp) as date) = cast(dateadd(day, -1, GetDate()) as date)
Sometimes, it is more efficient to do all the arithmetic on the "constant" (i.e. getdate()):
where TimeStamp >= dateadd(hour, 2, cast(GetDate() as Date))
Note: the appropriate function for this logic is dateadd() not datediff().
I am working on a query that will be an automated job. It needs to find all the transactions between 8 PM and 8 PM for the last day. I was thinking of doing something like this
DECLARE #start_date DATETIME
DECLARE #end_date DATETIME
SET #start_date = DATEADD(DAY, -2, GETDATE())
SET #end_date = DATEADD(DAY, -1, GETDATE())
For an automated query this works good at figuring out the date portion. But the TIME portion of the variable is the current time that the query executes. Is there a quick simple way to hard code the time portion of both variables to be 8:00 PM?
DECLARE #start_date DATETIME
DECLARE #end_date DATETIME
SET #start_date = DATEADD(hour, 20, DATEDIFF(DAY, 2, GETDATE()))
SET #end_date = #start_date + 1
select #start_date, #end_date
This will also work:
DECLARE #start_date datetime
DECLARE #end_date datetime
SET #start_date = LEFT(CONVERT(nvarchar, DATEADD(DAY, -2, GETDATE()), 120), 11) + N'20:00:00'
SET #end_date = #start_date + 1
select #start_date, #end_date
Although cyberkiwi's answer is very clever! =)
I needed to pull a date from the database and append 3:00 Pm to it. I did it this way
select dateadd(hour, 15, datediff(day, 0, myDatabaseDate))
from dbo.myDatabaseTable
where myDatabaseId = 1
The result that it returned was 2017-10-01 15:00:00.000. The date in the database is 2017-10-01. The solution that I proposed was to keep my current date. I added 0 days to my existing date. I gave it 15:00 hours and it worked like a charm.
In case of just updating a particular part of the datetime you can use SMALLDATETIMEFROMPARTS like:
UPDATE MyTable
SET MyDate = SMALLDATETIMEFROMPARTS(YEAR(MyDate), MONTH(MyDate), DAY(MyDate), <HoursValue>, <MinutesValue>)
In other cases it may be required to copy parts of datetime to other or update only certain parts of the datetime:
UPDATE MyTable
SET MyDate = SMALLDATETIMEFROMPARTS(YEAR(MyDate), MONTH(MyDate), DAY(MyDate), DATEPART(hour, MyDate), DATEPART(minute, MyDate))
Refer SQL Server Date/Time related API references for more such functions
DECLARE #start_date DATETIME = DATEADD(HOUR, 20, DATEADD(MINUTE, 00, CONVERT(DATETIME, CONVERT(DATE, GETDATE())))) - 2
DECLARE #end_date DATETIME = DATEADD(HOUR, 20, DATEADD(MINUTE, 00, CONVERT(DATETIME, CONVERT(DATE, GETDATE())))) - 1
Notes:
GETDATE() + X is the equivalent of DATEADD(DAY, X, GETDATE()).
Converting a DATEIME to a DATE and then back to a DATETIME again sets the time to midnight i.e. 00:00:00.000.
Seperate SET and DECLARE statements are unnecessary, but just in case it helps later, variables may be set as part of a SELECT statement too.
I had to do something similar, create a procedure to run from a certain time the previous day to a certain time on the current day.
This is what I did to set the start date to 16:30 on the previous day, basically subtract the parts you don't want to get them back to 0 then add the value that you want it to be.
-- Set Start Date to previous day and set start time to 16:30.00.000
SET #StartDate = GetDate()
SET #StartDate = DateAdd(dd,- 1, #StartDate)
SET #StartDate = DateAdd(hh,- (DatePart(hh,#StartDate))+16, #StartDate)
SET #StartDate = DateAdd(mi,- (DatePart(mi,#StartDate))+30, #StartDate)
SET #StartDate = DateAdd(ss,- (DatePart(ss,#StartDate)), #StartDate)
SET #StartDate = DateAdd(ms,- (DatePart(ms,#StartDate)), #StartDate)
Hope this helps someone.
What is the best way to strip the date from a DATETIME so only time is left to do a comparison?
I know I can do the following:
CONVERT(DATETIME, CONVERT(VARCHAR(8), GETDATE(),8))
But this involves convert and characters. If I wanted to check whether a time (including minutes) was between two other times stored in DATETIME columns, is there an elegant way to do this without having to rely on converting to character strings?
If you're using SQL 2008
SELECT CAST(GETDATE() AS TIME)
Try the TimeOnly function from Essential SQL Server Date, Time, and DateTime Functions:
create function TimeOnly(#DateTime DateTime)
returns datetime
as
begin
return dateadd(day, -datediff(day, 0, #datetime), #datetime)
end
go
Or simply cast the DateTime as Time in SQL Server 2008:
declare #time as time
set #time = cast(dateTimeVal as time)
DECLARE
#Now DateTime,
#Today DateTime,
#Time DateTime
SET #Now = GetDate()
SET #Today = DateAdd(dd, DateDiff(dd, 0, #Now), 0)
SET #Time = DateAdd(ss, DateDiff(ss, #Today, #Now), 0)
SELECT #Time
Just another way to get date and time from datetime.
datetime in SQL Server implemented as float value where whole part floor(value) is day from 1900-01-01 and fractional part (value - floor(value)) is part of twenty-four hours elapsed from start of day
select
d as [datetime],
cast(cast(T.d as float) - floor(cast(T.d as float)) as datetime) as [time],
cast(floor(cast(T.d as float)) as datetime) as [date]
from
(values
(getdate()),
('1753-01-01 23:59:59.700'),
('1899-12-31 00:00:00.300'),
('1900-01-01 00:00:00.300')
) as T(d);
In an extract I am dealing with, I have 2 datetime columns. One column stores the dates and another the times as shown.
How can I query the table to combine these two fields into 1 column of type datetime?
Dates
2009-03-12 00:00:00.000
2009-03-26 00:00:00.000
2009-03-26 00:00:00.000
Times
1899-12-30 12:30:00.000
1899-12-30 10:00:00.000
1899-12-30 10:00:00.000
You can simply add the two.
if the Time part of your Date column is always zero
and the Date part of your Time column is also always zero (base date: January 1, 1900)
Adding them returns the correct result.
SELECT Combined = MyDate + MyTime FROM MyTable
Rationale (kudos to ErikE/dnolan)
It works like this due to the way the date is stored as two 4-byte
Integers with the left 4-bytes being the date and the right
4-bytes being the time. Its like doing $0001 0000 + $0000 0001 =
$0001 0001
Edit regarding new SQL Server 2008 types
Date and Time are types introduced in SQL Server 2008. If you insist on adding, you can use Combined = CAST(MyDate AS DATETIME) + CAST(MyTime AS DATETIME)
Edit2 regarding loss of precision in SQL Server 2008 and up (kudos to Martin Smith)
Have a look at How to combine date and time to datetime2 in SQL Server? to prevent loss of precision using SQL Server 2008 and up.
If the time element of your date column and the date element of your time column are both zero then Lieven's answer is what you need. If you can't guarantee that will always be the case then it becomes slightly more complicated:
SELECT DATEADD(day, 0, DATEDIFF(day, 0, your_date_column)) +
DATEADD(day, 0 - DATEDIFF(day, 0, your_time_column), your_time_column)
FROM your_table
This is an alternative solution without any char conversions:
DATEADD(ms, DATEDIFF(ms, '00:00:00', [Time]), CONVERT(DATETIME, [Date]))
You will only get milliseconds accuracy this way, but that would normally be OK. I have tested this in SQL Server 2008.
This worked for me
CAST(Tbl.date as DATETIME) + CAST(Tbl.TimeFrom AS TIME)
(on SQL 2008 R2)
If you're not using SQL Server 2008 (i.e. you only have a DateTime data type), you can use the following (admittedly rough and ready) TSQL to achieve what you want:
DECLARE #DateOnly AS datetime
DECLARE #TimeOnly AS datetime
SET #DateOnly = '07 aug 2009 00:00:00'
SET #TimeOnly = '01 jan 1899 10:11:23'
-- Gives Date Only.
SELECT DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly))
-- Gives Time Only.
SELECT DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
-- Concatenates Date and Time parts.
SELECT
CAST(
DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly)) + ' ' +
DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
as datetime)
It's rough and ready, but it works!
If both of your fields are datetime then simply adding those will work.
eg:
Declare #d datetime, #t datetime
set #d = '2009-03-12 00:00:00.000';
set #t = '1899-12-30 12:30:00.000';
select #d + #t
If you used Date & Time datatype then just cast the time to datetime
eg:
Declare #d date, #t time
set #d = '2009-03-12';
set #t = '12:30:00.000';
select #d + cast(#t as datetime)
This was my solution which ignores the date value of the time column
CAST(Tbl.date as DATETIME) + CAST(CAST(Tbl.TimeFrom AS TIME) as DATETIME)
Hope this helps others
Convert the first date stored in a datetime field to a string, then convert the time stored in a datetime field to string, append the two and convert back to a datetime field all using known conversion formats.
Convert(datetime, Convert(char(10), MYDATETIMEFIELD, 103) + ' ' + Convert(char(8), MYTIMEFIELD, 108), 103)
Convert both field into DATETIME :
SELECT CAST(#DateField as DATETIME) + CAST(#TimeField AS DATETIME)
and if you're using Getdate() use this first:
DECLARE #FechaActual DATETIME = CONVERT(DATE, GETDATE());
SELECT CAST(#FechaActual as DATETIME) + CAST(#HoraInicioTurno AS DATETIME)
I had many errors as stated above so I did it like this
try_parse(concat(convert(date,Arrival_date),' ',arrival_time) as datetime) AS ArrivalDateTime
It worked for me.
Finding this works for two dates where you want time from one and date from the other:
declare #Time as datetime = '2021-11-19 12:34'
declare #Date as datetime = '2021-10-10'
SELECT #time + datediff(day, #Time, #Date)
DECLARE #Dates table ([Date] datetime);
DECLARE #Times table ([Time] datetime);
INSERT INTO #Dates VALUES('2009-03-12 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-26 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-30 00:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 12:30:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
WITH Dates (ID, [Date])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Date]), [Date] FROM #Dates
), Times (ID, [Time])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Time]), [Time] FROM #Times
)
SELECT Dates.[Date] + Times.[Time] FROM Dates
JOIN Times ON Times.ID = Dates.ID
Prints:
2009-03-12 10:00:00.000
2009-03-26 10:00:00.000
2009-03-30 12:30:00.000
To combine date from a datetime column and time from another datetime column this is the best fastest solution for you:
select cast(cast(DateColumn as date) as datetime) + cast(TimeColumn as datetime) from YourTable
SELECT CAST(CAST(#DateField As Date) As DateTime) + CAST(CAST(#TimeField As Time) As DateTime)
Another way is to use CONCATand CAST, be aware, that you need to use DATETIME2(x) to make it work. You can set x to anything between 0-7 7 meaning no precision loss.
DECLARE #date date = '2018-03-12'
DECLARE #time time = '07:00:00.0000000'
SELECT CAST(CONCAT(#date, ' ', #time) AS DATETIME2(7))
Returns 2018-03-12 07:00:00.0000000
Tested on SQL Server 14
simply concatenate both , but cast them first as below
select cast(concat(Cast(DateField as varchar), ' ', Cast(TimeField as varchar)) as datetime) as DateWithTime from TableName;
select s.SalesID from SalesTbl s
where cast(cast(s.SaleDate as date) as datetime) + cast(cast(s.SaleCreatedDate as time) as datetime) between #FromDate and #ToDate
The existing answers do not address the datetime2 datatype so I will add mine:
Assuming that you want to add a time value to a datetime2 value where:
The datetime2 value could contain non-zero time component and/or fractional seconds
The time value could contain the value 23:59:59.9999999 which is 86,399.9999999 seconds, 86,399,999,999.9 microseconds or 86,399,999,999,900 nanoseconds¹
Due to the limitations of dateadd function¹ you must add them in two steps:
Convert the time value to seconds and use dateadd(second, ...)
Extract the nanoseconds from the time value and use dateadd(nanosecond, ...) to add them to the date calculated above
declare #dv datetime2 = '2000-01-01 12:34:56.7890123';
declare #tv time = '23:59:59.9999999';
select dateadd(
nanosecond,
datepart(nanosecond, #tv),
dateadd(
second,
datepart(hour, #tv) * 60 * 60 + datepart(minute, #tv) * 60 + datepart(second, #tv),
#dv
)
);
-- 2000-01-02 12:34:56.7890122
¹ Nanosecond values might not fit in int datatype which dateadd function expects.
SELECT CAST(your_date_column AS date) + CAST(your_time_column AS datetime) FROM your_table
Works like a charm
I ran into similar situation where I had to merge Date and Time fields to DateTime field. None of the above mentioned solution work, specially adding two fields as the data type for addition of these 2 fields is not same.
I created below solution, where I added hour and then minute part to the date. This worked beautifully for me. Please check it out and do let me know if you get into any issues.
;with tbl
as
(
select StatusTime = '12/30/1899 5:17:00 PM', StatusDate = '7/24/2019 12:00:00 AM'
)
select DATEADD(MI, DATEPART(MINUTE,CAST(tbl.StatusTime AS TIME)),DATEADD(HH, DATEPART(HOUR,CAST(tbl.StatusTime AS TIME)), CAST(tbl.StatusDate as DATETIME)))
from tbl
Result: 2019-07-24 17:17:00.000