I'm using celery 3.0.18 with RabbitMQ 3.0.2. I have a task sent to another application by using celery.send_task, and I can see the send_task call in my logs, I can see the packets leaving the worker instance, and I can see the packets reaching the RabbitMQ instance when I call tcpflow -ce -i any port 5672, however, only the first message gets to the queue. They all have the same routing key, I tried recreating the exchange and bindings, and even a new RabbitMQ instance, and nothing seems to work. This used to work fine for months, until we had to rebuild the RabbitMQ from scratch after a crash in our AWS infrastructure. Strangely, I have the exact same setup working on other application, using the same broker and the same exchange, binding and queue, and it works perfectly there. Also, it works when I send the messages to the same exchange using the same call from a management script, running from the shell on the same instance, but it doesn't work when it's sent from the celery task in the worker process.
Any ideas on what the problem might be?
Eventually, I figured what's wrong, but it's not clear if this is the expected behavior, a celery bug, or a RabbitMQ bug.
What happens is that besides our application tasks, I have a custom logging handler used to send logs to a central location using RabbitMQ, using celery.send_task. This logging handler sends messages to an exchange named application.logger, with a routing key like application.logger.info, application.logger.warning, etc, and have bindings to route some logging levels to specific queues. This exchange, bindings and queues were created directly in RabbitMQ and not defined in Celery routes.
When the worker tries to send a message to this exchange and it doesn't exist, Celery would log a 404 NOT_FOUND error. After that, tasks sent to other exchanges using the same connection weren't delivered. They were sent by the worker instance, we could see the packets arriving and the RabbitMQ management screen for that connection even shows the data arriving from the client in kb/s, but no messages were delivered.
Related
I have configured MassTransit with RabbitMQ as transport. And I just use an instance of generic IRequestClient to send requests to a consumer that then should return a response.
My problem is that every other request fails with a TimeoutException. Execute it once, the next time it fails, and then it works again.
The Consumer is not even invoked when failed.
What can be the reason for this?
I have other services share a similar name in their requests and consumers. I have tried to figure out if that is the problem.
You should post the configuration code of your application using the request client and the one configuring the consumer.
If you have other consumers with the same name, it's likely they're on the same queue if you're using ConfigureEndpoints, which could be the root cause of the issue.
Since it's every-other-message that times out, that would make sense since RabbitMQ will load balance the queue across the different services with the same queue name.
I have a webpage connecting to a rabbit mq broker using javascript/websockets that are exposed by a spring app deployed in tomcat. Messages are produced 1 per second by an external application and are rendered on the webpage. The javascript subscription is durable.
The issue I'm experiencing is that when the network connection is broken on the javascript client for a period of time (say 60 seconds), the first ~24 seconds of messages are missing. I've looked through the logs of the app deployed in tomcat and the missing messages seem to be up until the following log statement:
org.springframework.messaging.simp.stomp.StompBrokerRelayMessageHandler - DEBUG - TCP connection to broker closed in session 14
I think this is the point at which the endpoint realises the javascript client is disconnected and decides to close the connection to the broker resulting in future messages queueing up.
My question is how can I ensure that the messages between the time the network is severed and the time the endpoint realises the client is disconnected are not lost? Should the endpoint put the messages back on the queue somehow? Maybe there's a way to make it transactional?
Thanks in advance.
The RabbitMQ team monitors this mailing list and only sometimes answers questions on StackOverflow.
Your Tomcat application should not acknowledge messages from RabbitMQ until it confirms that your Javascript client has received them. This way, any messages that aren't ack-ed by the JS client won't be ack-ed by Tomcat, and RabbitMQ will re-deliver them.
I don't know how your JS app and Tomcat interact, but you may have to implement your own ack process there.
I've got an iOS application which uses a STOMP Client to talk to RabbitMQ. The application loads a lot of state during startup, and then keeps that state in sync by receiving updates published on STOMP. Of course, if it loses its connection, it can no longer be sure it's in sync, and therefore has to re-load that large initial blob. Any kind of network interruption triggers this behavior and makes my customers sad.
There are a lot of big-picture ways to fix this (and I'm working on them) but in the meantime, I'm trying to use persistent queues to solve this problem. The idea is that the server will create a queue, bind it to the appropriate topics, and then start building the large startup bundle. When finished, it will hand everything off to the client. The client will set itself up with the startup bundle, open a subscription to the queue, and then process any updates which happened while the server was getting things ready. Similarly, if the client should become disconnected, it can simply reconnect and resume reading the messages it finds in the queue.
My problem is that while the client successfully receives messages sent after it connects, if there were any messages in the queue before it connected, they are not read. Likewise, if the client becomes disconnected, when it reconnects, it won't see any messages which arrived while it was away.
Can anyone suggest how I might get the client to be able to read those missing messages?
It turns out what was happening was that the STOMP adapter was consuming the messages but failing to deliver them. Thus, when the client reconnected, it wouldn't have any messages waiting for it.
To fix the problem, I changed the "ack" setting on the subscribe request to "client", meaning that STOMP shouldn't consider the message delivered until the client sends back an ACK frame. By changing my client appropriately, messages now get delivered even after the client has been away.
I've got a webservice that accepts messages that can be sent to a RabbitMQ cluster using whatever queue they define. This is so front-end devs can send messages via javascript.
I want to make the webservice more robust so that when we have network trouble, the webservice can still accept messages and then handle them when the network is back up. After some initial reading, it seems that the Shovel plugin should handle this nicely.
What I was thinking was to install a local instance of RabbitMQ on the webservice box with shovel turned on. I can then send all messages through the local RabbitMQ instance and have it push all messages to the cluster and deal with the network problems.
My problem is after looking at the documentation it seems that I have to configure every queue I want to forward to in the shovel config file. If that's the case I'm not sure this will work since we allow clients to define a queue through the webservice on the fly.
I would like to have the webservice take the messages, hand them off to the local rmq instance and have it pass the messages off to the cluster using the same queues/exachanges/etc.
Has anyone tried this or can explain how the shovel plugin works?
Have you considered sending messages to an exchange instead of a queue. Send all messages to one exchange possibly a topic exchange if you need that kind of flexibility. Then have the consumer handle the different messages or different queues from the exchange. Sending to one exchange would make configuring the shovel considerably easier.
I'm a fairly new user of ActiveMQ and I'm looking for a way to get detailed debug information on the client side of a queue connection. My problem is this: I have a server that is sending a message through a queue to a client. Using the admin web page associated with the broker, I can verify the following: the queue was created, there is a consumer associated with the queue, the message has been enqueued, the message has been dispatched, the dispatched queue size is 1, the message has not been dequeued. This setup was working yesterday but mysteriously stopped working today even though I did a restart of the activemq service. The log file at /var/log/activemq.log does not contain any useful information.
At this point I'm stumped; I'm assuming that there is some sort of problem with the configuration, but it hasn't changed since yesterday. Does anybody have a suggestion about what my next step should be?
Turn on debug (or even trace) logging in the broker first of all in conf/log4j.properties.
log4j.logger.org.apache.activemq=DEBUG
restart the broker and re-run your scenario. The logging will hopefully provide you with some information.
Jconsole is also a useful tool to monitor the running broker.
Does your client use any message filters?
You can also enable remote debugging and then connect with an IDE.
To start remote debugging execute
$ ACTIVEMQ_DEBUG=true bin/activemq
and then start a remote debugger to connect to port 5005