By trying to start the server with "moov server" (windows) I got the error message "The path (here comes the address on my pc) does not point to a valid Moovweb project". How can I find out where my project is located - if it is somewhere?
You'll have to create a project first before you can run the server.
Use moov generate to create a project in the current directory. Then cd into that directory and run moov server from within there.
Related
Trying to get the sidekick image built and having some issues. Is there any documentation other than the README.md file?
My current problem is with getting the JRE requirement working but there are others. The page says "download Oracle JRE and place it inside the working directory. Optionally if you have a company wide distribution url, use that one at a later step." and the help says "Java (JRE) download url or path inside working directory". Have not been able to get this to work.
I went to the JRE link provided and was presented with options to download a rpm file or a tar.gz file. Which is expected (was unable to get either one working)?
It says to place the file in the "working directory" but not sure where exactly. Tried in sidekick folder and in sidekick/jre both without success no matter what I used after the -j command. Is this just the path or should the filename be included as well? Can I get an example?
I'm running this script using my login but noticed the output folder is being created with root user and group. I see no indication that this should be run with sudo. What is the correct way to run this script?
Using debug, I see the function "download if not cached". Can I save these files (JRE, Bamboo jar file, etc.) somewhere so I don't have to worry about downloading them? If so, where should they go? Looks like I might have a problem with the wget to d/l the jar file so would like to just be able to place all these in a folder and be done with it.
It looks like the major problem is the script didn't clean up after itself if it fails. The issue was the first time it failed then that caused subsequent issues as the output folder was already there. Removing this directory between each attempt help.
As for the correct syntax for the -j JRE option I manually downloaded the JRE and placed in a folder called per-build-container/sidekick/stuff/. For the command line it is not just the path but the file name as well (the tar.gz and not the RPM). For my case it was
-j stuff/jre-8u251-linux-x64.tar.gz
Note I also ran the script as sudo. Wasn't stated but seemed to work OK.
Another issue I ran into was the download of the agent jar file. There is a redirect in the wget file that was not working for us. I ended up editing the script and replacing the Altassian based url with the redirected one.
This addresses all the issues I ran into with the initial question.
I am trying to install Yii framework via archive file in Windows 7...after downloading the file I tried extracting it into a folder in my C:\wamp\www\bid location, however, I encounter an error saying this:
! C:\wamp\www\bid\yii-basic-app-2.0.2.tgz: Cannot create symbolic link C:\wamp\www\bid\basic\vendor\bin\markdown
A required privilege is not held by the client.
! C:\wamp\www\bid\yii-basic-app-2.0.2.tgz: Cannot create symbolic link C:\wamp\www\bid\basic\vendor\bin\yii
A required privilege is not held by the client.
I thought that perhaps Winrar can't extract tgz files so I downloaded 7-zip...Using 7-zip it extracted into a tar file and the tar file was extracted with no errors...For some reason though I do not seem to have the framework folder that seem to be in other people's directory structure...Moreover after trying create my own framework folder and performing this command:
yiic webapp C:\wamp\www\bid
It states that yiic is not recognized as an internal or external command
Can someone tell me what I'm doing wrong...I've tried setting this up numerous times and failed
You need to run 7-Zip File Manager in administrator mode.
Right-click the icon of 7-Zip File Manager, and then click "Run as administrator".
you need to call the command with php since it is actually a external command, i do it like this
php ./yiic webapp NameOfApp
This way your terminal understand that yii is a program that runs with php.
Another solution is to add the yii path to your environmental variable, regards
I want to change the build dir of team city build agent to:
E://MY_PROJECT_SVN
While installing the build agent I set the same but it diaplays C://buildAgent/work in TeamCity web ui due to which my build fails.
My buildAgent.properties file shows
workDir=E\:\\MY_PROJECT_SVN
And buildAgent.dist.properties file shows
workDir=E://MY_PROJECT_SVN
But I get following error when I run team city
Failed to start MSBuild.exe. Failed to find project file at path:
C:\BuildAgent\work\3ac16e0b4e3af05b\Modules\SIM5.sln
Because of wrong working dir
The buildAgent.dist.properties is indeed just an example, but the solution is something you almost had; you need to put this into the buildAgent.properties:
workDir=E:/MY_PROJECT_SVN
Update:
It should be noted that on TeamCity 7.0 the workDir seemingly can't be on a separate disk; it runs most of the way through the build and then fails. However, using a junction to point from the local (default) folder to the E: drive will work. The tempDir can be pointed to a remote disk though.
The file buildAgent.dist.properties is not used, it is just an example. So don't worry about the contents of that file.
What you have set in buildAgent.properties is what matters. What is happening for you is the agent is reverting to the default location for the working directory.
This means that for some reason it is not able to read or parse the buildAgent.properties file. Make 100% certain that the entire file has no errors in it.
https://confluence.jetbrains.com/display/TCD8/Build+Agent+Configuration
Making any change to this file and saving it should cause the build agent to reboot automatically and reload the new config once it has restarted.
http://blog.jetbrains.com/teamcity/2007/10/configuration-files-editing-without-teamcity-restart/
To build on paul-f-wood's answer:
Teamcity 9.1.6 also has the "feature" where the work directory cannot be on a different drive. I tried several permutations of the temp and work dir, and the only ones that stuck were with the work dir on the same drive as the root teamcity folder. However as paul said, using a junction works like a charm.
cmd: rm C:\BuildAgent\work
cmd: mklink /J C:\BuildAgent\work E:\MY_PROJECT_SVN
I'm facing a problem due to the folder name "Program Files" in which my wamp is installed.
I'm using Yii Framework to create a web app.
While running a command
yiic webapp c:\Program Files\wamp\www\YiiApp
it gives error due to the white space in the folder name.
The error is as below:
C:\Program Files\wamp\www\yii-1.1.13.e9e4a0\framework>yiic webapp c:\Program Fil
es\wamp\www\YiiApp
Error: Unsupported VCS specified. Currently only git and hg supported.
USAGE
yiic webapp <app-path> [<vcs>]
DESCRIPTION
This command generates an Yii Web Application at the specified location.
PARAMETERS
* app-path: required, the directory where the new application will be created.
If the directory does not exist, it will be created. After the application
is created, please make sure the directory can be accessed by Web users.
* vcs: optional, version control system you're going to use in the new project.
Application generator will create all needed files to the specified VCS
(such as .gitignore, .gitkeep, etc.). Possible values: git, hg. Do not
use this argument if you're going to create VCS files yourself.
What should I do? Please suggest me something.
The second install will have superceeded the first. In other words Wampmanager and Apache and MySQL will be being started out of the new folder.
As per your question on wamp forum, copy wwww/subfolders into the new location and then copy ONLY YOUR databases from mysqlx.y.z/data into the same place in the new location.
Then delete the folders from program files.
You only need one wamp ( Apache/MySQL) per system.
I tried something else:
Without moving the previously installed wamp's content just read the
"uninstall_services.bat" file
just uninstall these services from that wamp directory which you want to disable.
Still the another wamp's services won't start. So install those services mentioned in "uninstall_services.bat" file manually from respective directories.
Now Restart All Services from the tray icon. The required wamp will be enabled.
If won't, try it again. No need to reinstall wamp.
I have installed SenchaSDKTools-2.0.0-beta3-windows on my windows Xp 32-bit.
following is the command I am running on command prompt.
C:\Program Files\SenchaSDKTools-2.0.0-beta3>sencha app create MyApp c:\xampp\htdocs\sencha\myapp\
Giving following error
[ERROR] the current workind directory (C:\Program
Files\SenchaSDKTools-2.0.0-beta3>) is not valid SDK directory. Please
'cd' in to a SDK directory before executing this command.
environment variable has been set following way.
Variable name : Path
Value : C:\Program Files\SenchaSDKTools-2.0.0-beta3
can anyone figure out what exactly wrong in this process ?
*****Sencha Touch setup Guide steps(in Window)******
Download Sencha Touch SDK Tool. (http://www.sencha.com/products/touch/download/ -->SDK Tools Beta for Developers). Run .exe file. It will install tool to default path. (i.e. C:\Program Files\SenchaSDKTools-2.0.0-beta3)
Download Sencha Touch SDK. (Download openSource version file licensed under GPL.).
Extract SDK you just download in step 2.
Open Command line terminal (start->Run->type cmd). Change directory path to SDK path as you just extracted in step3.
Verify that Sencha Command is working properly on your machine. So Type Sencha.
E.g. sdkPath>sencha
you will see "Sencha Command v2.0.2" message with other sencha command detail.
Create app in your web directory by typing following.
E.g. sdkpath> sencha app create firstSenchaApp "path/ to/ www"
(If you have tomcat 7 installed in your computer, give path to \apache-tomcat-7.0.30-windows-x86\apache-tomcat-7.0.30\webapps)
Note: There must not be space in directory path name. _(underscore),- (desk) are allowed.
If app is not generated in step 6. There might be an error. There are as follow:
If error message appear is "sencha' is not recognized as an internal or external command, operable program or batch file.”, follow these steps to troubleshoot:
The path to SDK Tools directory is prepended to your system's PATH environment variable.
From the terminal, run
echo $PATH or echo %PATH% .
The SDK Tools directory should be displayed in part of the output. If this is not the case, add it to your PATH manually.
The environment variable SENCHA_SDK_TOOLS_{version} is set, with the value being the absolute path to the installation directory mentioned above.
For example: If the installed version is '2.0.0-beta2', a SENCHA_SDK_TOOLS_2_0_0_BETA2 must be set.
From the terminal, run
echo $SENCHA_SDK_TOOLS_2_0_0_BETA2 or echo %SENCHA_SDK_TOOLS_2_0_0_BETA2% on Windows.
If the output is empty, set the environment variable manually.
Wrong Current Working Directory
A common mistake is not running Sencha Command within either a valid SDK directory or an application directory. If the current directory is not a SDK or application directory, "sencha" command will fallback to backwards-compatible mode. As of SDK Tools release "2.0.0-beta2", you should see a clear warning in such case:
"The current working directory (...) is not a recognized Sencha SDK or application folder. Running in backwards compatible mode." So in this case follow proper step as mentioned above.
Reference:
http://www.sencha.com/forum/showthread.php?192169-Important-SDK-Tools-Sencha-Command-Update
There is an invisible file that you need to copy, called .senchasdk. Make sure it is in the folder.
I think you're having the same problem I had; I had attempted to run 'sencha app create...' from the folder containing sencha.bat. Instead, you need to run 'sencha app create...' from the sencha-touch-2.0.1.1 folder (which contains the .senchasdk file).
See this previous SO question!
Save my days.
By the way, if you can't extract the sencha-cmd to sdk tools, try to extract on other location and copy the folder [3.0.0.250] to your sdk tools > [bin] folder.
hope this helps.