I have an instance of Weblogic 10.3.5 running with a bunch of apps.
For some reason, the deployments page in the Admin console stopped showing the health (status) of the deployed apps (usually a green check icon). Just looks weird. Any ideas on how I can bring that back?
The apps are not running, possibly because their target machine isn't currently up. Find out what managed server they are targeted to and make sure it's running. If you want them to run on the Admin Server, you can change their targets via configuration.
some times it may happen...
First you have to make sure all the applications are running properly or not....
If any issues in deploying application or deployed application then it may show in this manner....
Exact solution to your problem is Restarting admin node
But it is better to do following steps...
Stop both admin and Managed nodes.
Start the Admin node then managed node.
Check the console...
Related
I have created a Wordpress website locally using the Bitnami installer. Everything was going well and I have managed to finish designing the website until something happened.
I'm not sure if it is in any way related to the issue but my computer automatically installed a Windows update, since then I cannot access the website that I created locally. It says that,
This site can’t be reached
localhost refused to connect.
Try:
Checking the connection
Checking the proxy and the firewall
ERR_CONNECTION_REFUSED
Again, I'm not sure if this has anything to do with the update, because I have already uninstalled the updated and it's still the same. What's also weird is that my Bitnami managers servers aren't running any servers, and actually there are no servers under it at all.
I am confused and lost as to how this happened and what's the solution for this. I would appreciate any help or pointed anyone can give me. Please see attached Photos.
This is the initial message when I try to access the website
Clicking on the go to application and open my phpadmin doesn't do or open anything
There are no servers
There are no events
Bitnami Engineer here,
If the Bitnami manager doesn't show the services is because they are not installed in the server or they got renamed during the upgrade process. Let's try to reinstall the services again.
First of all, you will need open your installation directory and double-click on the use_wordpress.bat file. That will open the command prompt in Windows
Run the remove command
serviceinstall.bat REMOVE
If the console is closed, open it again and run the install command
serviceinstall.bat INSTALL
Check if the services are now up and running in the Bitnami Manager tool
I am currently in the beginnings of developing an integrated Sonos app, and to get a better understanding of what needs to happen, I downloaded Sonos's provided sample server for the "Acme" service.
On first use, I was able to get it working and was able to play songs from the static directory that was provided within the package. However, after closing the server, leaving my computer for some time, and booting it back up again with ./gradlew bootRun, I noticed that I was not able to use the sample service anymore. On the window to link the sample account, it said that there was an error in authenticating and that it might be an issue with the connection.
First things first, I rebooted everything I could reboot. Turned the gradle server on then off. Removed the service and created it again. I even did a factory reset and put the Sonos device (PLAY:1 variety) on a different network at the office. The sample service still won't authenticate.
What could be causing the authentication for the sample Acme service to stop working just like that on every network? I should mention that I have been using the same config settings ever since I got it to work the first time, so it should not be a problem with my configurations in the customSD page. Also, I have not changed any code within the sample server.
TL;DR: The Sonos sample server worked one time for me, and hasn't worked since on multiple networks and devices, even after a factory reset. What could be causing this issue?
It sounds like the player possibly can't find the sample server any more. When you set up the service via customsd, you used an ip address for the endpoint. Is it possible that ip address has changed?
Right now i am developing an app on remote DEV server. Every time when i update the code (js,html,css etc) then test on the device locally. There is a popup to force me to update the app. But my app need to connect DEV server for testing some backend feature like login.
DEV server is a remote Websphere running WL6.1 for development purpose. Why i need it because my app connect to some web services like Auth server via internal environment (actually is VPN). And those services i cannot set up easily in local environment. That makes using localhost for development is not really possible.
My problem is feeling the development process not really handy. Every time i change the code and want to run on the devices. I need to upload the .wlapp via console. It takes time! Everyday i change the code thousands time. That's why i need a solution.
And now i am seeking for 2 possible ways:
Auto push the .wlapp to remote server when i run and build. Can ANT do that? i read the Doc and find it's a bit of complicated.
Disable Direct Update. Actually i do a tricky hack inside worklight.js to override this feature. But i think it is not a good solution. So, is there any server config can switch the that off?
And i read this thread IBM Worklight - How to disable Direct Update?
Not working.
From what you are describing, things seem to work exactly as they should.
You have your local Worklight Development Server (that's the Worklight Studio plug-in you've installed in your Eclipse).
You have a remote server - here I am presuming this is actually some application server with Worklight Server deployed on it (that is, not the plug-in, but an actual installation of the server component) as well as your deployed project's .war file.
If that's not your setup, you need to think again about your 'testing setup'.
Auto push the .wlapp file to remote server. So the dev server always
keep the latest resource. Not to force me "update" the older version
on the server.
No. You can't do this. You need to manually build your app with the correct connectivity settings for the remote server via Run As > Build Settings and Remote Target.
In addition to the native project that will now contain these connectivity settings for the actual app, you will also have a .wlapp file in the bin folder. You will need to manually deploy it each time you're changing your app's contents. That's why you do development testing in the local development server... when moving to a remote server, that's for QA/UAT/PROD purposes usually.
Just disable this annoying feature in DEV environment.
You will need to do this in both servers via their respective Worklight Console as described in the question you've linked to, so that once you deploy the .wlapp file, it will not send a Direct Update request.
Instead, you'll need to manually re-install the app each time.
I suspect you didn't do this action on the remote server?
If you did, then you need to explain your setup, as the only thing you've wrote about was its name... "dev".
No. You need to manually deploy the .wlapp to your remote server.
What is the best strategy to deploy the latest build to the AppHarbor live site without users seeing any error while the deployment is in progress. Worker process will always be restarted when you deploy a fresh build though. What is the recommended strategy here.
How does StackOverflow deploy builds or bug-fixes to the live site.
If you're currently getting errors when deploying new versions using AppHarbor, then please get in touch so that we can take a look.
Worker restarts should not cause errors as such, just some initial slowness for the first users accessing the site after a deploy. We're also working on hot-swaps so that we only switch over to the new version once the workers are all warmed up and running.
Greetings,
we have to following problem.
Our application is deployed using ClickOnce. Everything is running fine and application is able to connect to the wcf service. The problem occurs when application is installed on FRESH XP machine without .net Framework and Windows Installater (that were selected in ClickOnce prerequities).
Application downloads .NET Framework 3.5SP1 and windows installer but then it cannot connect the the server. Reboot after install does not help.
The strange is that this application has been installed on 10 xp machines and 4 of them can connect to the service without a problem
Are there any dlls referenced in your application? You might want to check them (Under project's Properties\Publish tab\Application Files button) see if you missed to include the needed dlls or files.
alt text http://www.freeimagehosting.net/uploads/e8ff221e20.jpg
We ran into this and were forced to reinstall .net on some machines no idea why though.
This is a shot in the dark but have you tried depends.exe and see if it can profile what is happening.
Also Take a look at this blog and get a crash dump and see if you can use it to at least tell you what is complaining the loudest.
What do you mean when you say 'cannot connect to the server'?
a. The machine cannot connect to the install location and therefore the clickone app is not installed?
b. The app installs (along with the pre-requisites) and starts fine. Then it is unable to connect/communicate with your WCF services.
I presume (b) I just wanted to clarify.
What happens when you ping the machine the services are on from one of the failed install machines? Also what happens when you put the service url into a browser on one of the failed install machines? Can you see the wsdl?
Obviously your deployment package works because it works on those other machines (I assume it IS the same package all machines are installing?), therefore I doubt you are missing any dll's as a ClickOnce app should include all dll's it needs (sometimes you do need to tell ClickOnce explicitly to include).
Last question is, when the app tries to call the service, exactly what exception is it getting back?
I just remembered something which has caught me out in the past with some machines being unable to connect but others can...especially 'new' machines.
Check this file:- C:\WINDOWS\system32\drivers\etc\hosts
Check the contents on a machine that works and one that doesn't. We have some IP to machine name mapping going on that on new machines is not set and so the new machines cannot find the servers.