How to get display id and name from a table into view. Where display id select by using where clause, upto now I am select only display id but now I want to select name also from same table.
old table was like this.
SELECT id,
(SELECT displayid
FROM quickpay12.q_sponsortrack AS Q_SponsorTrack_1
WHERE ( f1.transferto = f1.id )) AS TransferTo,
(SELECT displayid
FROM quickpay12.q_sponsortrack AS Q_SponsorTrack
WHERE ( f1.transferby = f1.id )) AS TransferBy,
descid,
credit,
debit,
description,
vdate,
balance,
wallettype,
sno
FROM quickpay12.f_transactionsummary_employee AS f1
Try following query to return all columns from all tables :
SELECT f1.* ,
Q_SponsorTrack_1.* ,
Q_SponsorTrack.*
FROM quickpay12.f_transactionsummary_employee AS f1
LEFT JOIN quickpay12.q_sponsortrack AS Q_SponsorTrack_1 ON f1.transferto = Q_SponsorTrack_1.id
LEFT JOIN quickpay12.q_sponsortrack AS Q_SponsorTrack ON f1.transferby = Q_SponsorTrack.id
Related
So I've done some looking around and wasn't unable to find quite what I was looking for. I have two tables.
1.) Table where general user information is stored
2.) Where a status is generated and stored.
The problem is, is that there are multiple rows for the same users and querying these results in multiple returns. I can't just merge them because they aren't all the same status. I need just the newest status from that table.
Example of the table:
SELECT DISTINCT
TOP(50) cam.UserID AS PatientID,
mppi.DisplayName AS Surgeon,
ISNULL(sci.IOPStatus, 'N/A') AS Status,
tkstat.TrackerStatusID AS Stat_2
FROM
Main AS cam
INNER JOIN
Providers AS rap
ON cam.VisitID = rap.VisitID
INNER JOIN
ProviderInfo AS mppi
ON rap.UnvUserID = mppi.UnvUserID
LEFT OUTER JOIN
Inop AS sci
ON cam.CwsID = sci.CwsID
LEFT OUTER JOIN
TrackerStatus AS tkstat
ON cam.CwsID = tkstat.CwsID
WHERE
(
cam.Location_ID IN
(
'SURG'
)
)
AND
(
rap.IsAttending = 'Y'
)
AND
(
cam.DateTime BETWEEN CONCAT(CAST(GETDATE() AS DATE), ' 00:00:00') AND CONCAT(CAST(GETDATE() AS DATE), ' 23:59:59')
)
AND
(
cam.Status_StatusID != 'Cancelled'
)
ORDER BY
cam.UserID ASC
So I need to grab only the newest Stat_2 from each ID so they aren't returning multiple rows. Each Stat_2 also has an update time meaning I can sort by the time/date that column is : StatusDateTime
One way to handle this is to create a calculated row_number for the table where you need the newest record.
Easiest way to do that is to change your TKSTAT join to a derived table with the row_number calculation and then add a constraint to your join where the RN =1
SELECT DISTINCT TOP (50)
cam.UserID AS PatientID, mppi.DisplayName AS Surgeon, ISNULL(sci.IOPStatus, 'N/A') AS Status, tkstat.TrackerStatusID AS Stat_2
FROM Main AS cam
INNER JOIN Providers AS rap ON cam.VisitID = rap.VisitID
INNER JOIN ProviderInfo AS mppi ON rap.UnvUserID = mppi.UnvUserID
LEFT OUTER JOIN Inop AS sci ON cam.CwsID = sci.CwsID
LEFT OUTER JOIN (SELECT tk.CwsID, tk.TrackerStatusId, ROW_NUMBER() OVER (PARTITION BY tk.cwsId ORDER BY tk.CreationDate DESC) AS rn FROM TrackerStatus tk)AS tkstat ON cam.CwsID = tkstat.CwsID
AND tkstat.rn = 1
WHERE (cam.Location_ID IN ( 'SURG' )) AND (rap.IsAttending = 'Y')
AND (cam.DateTime BETWEEN CONCAT(CAST(GETDATE() AS DATE), ' 00:00:00') AND CONCAT(CAST(GETDATE() AS DATE), ' 23:59:59'))
AND (cam.Status_StatusID != 'Cancelled')
ORDER BY cam.UserID ASC;
Note you need a way to derive what the "newest" status is; I assume there is a created_date or something; you'll need to enter the correct colum name
ROW_NUMBER() OVER (PARTITION BY tk.cwsId ORDER BY tk.CreationDate DESC) AS rn
SQL Server doesn't offer a FIRST function, but you can reproduce the functionality with ROW_NUMBER() like this:
With Qry1 (
Select <other columns>,
ROW_NUMBER() OVER(
PARTITION BY <group by columns>
ORDER BY <time stamp column*> DESC
) As Seq
From <the rest of your select statement>
)
Select *
From Qry1
Where Seq = 1
* for the "newest" record.
I wrote a query , that gives me this Output :
(This is Just a sample obviously the Output Table contains 300000 rows approximatly)
And This is my Query :
proc sql;
create Table Output as
select ID_User, Division_ID, sum(conta) as Tot_Items, max(Counts) as Max_Item
from (select c.ID_User , c.Div_ID as Division_ID, ro.code as Mat, count(*) as Counts
from Ods.R_Ordini o
inner join DMC.Cust_Dupl c
on User_ID = ID_User
inner join ods.R_Nlines ro
on ro.Orders_Id = o.Id_Orders AND RO.SERVICE = 0
inner join ods.R_Mat m
on ro.Mat_Id = Id_Mat and flag = 0
group by
ID_User,
C.Division_ID,
Ro.Code
Having Counts > 1
)
group by
Id_User,
Division_ID
Order by
Tot_Item DESC
;
quit;
So , What i want is to re-write this Query , but instead of the Group by i want to use the Where Condition , (WHERE=(DIVISION_ID=3)) this is the condition.
I tried several attempts , with some i got errors , and with others i did got an output , but the output was not like the original one.
any help would be much appreciated , thank you.
The SAS data set option (where=(<where-expression>)) can only be coded adjacent to a data set name. So the option would have to be applied to the data set containing the column div_id that is the basis for computed column division_id. That would be table alias c
DMC.Cust_Dupl(where=(div_id=3)) as c
Or just use a normal SQL where clause
…
)
where division_id=3
group by …
Just use WHERE DIVISION_ID=3 before group by.
select ID_User, Division_ID, sum(conta) as Tot_Items, max(Counts) as Max_Item from (select c.ID_User , c.Div_ID as Division_ID, ro.code as Mat, count(*) as Counts from Ods.R_Ordini o inner join DMC.Cust_Dupl c on User_ID = ID_User inner join ods.R_Nlines ro on ro.Orders_Id = o.Id_Orders AND RO.SERVICE = 0 inner join ods.R_Mat m on ro.Mat_Id = Id_Mat and flag = 0 WHERE DIVISION_ID=3 group by ID_User, C.Division_ID, Ro.Code Having Counts > 1 ) group by Id_User, Division_ID Order by Tot_Item DESC
I am not able to validate this legacy sql into standard bigquery sql as I don't know what else is required to change here(This query fails during validation if I choose standard SQL as big query dialect):
SELECT
lineitem.*,
proposal_lineitem.*,
porder.*,
company.*,
product.*,
proposal.*,
trafficker.name,
salesperson.name,
rate_card.*
FROM (
SELECT
*
FROM
dfp_data.dfp_order_lineitem
WHERE
DATE(end_datetime) >= DATE(DATE_ADD(CURRENT_TIMESTAMP(), -1, 'YEAR'))
OR end_datetime IS NULL ) lineitem
JOIN (
SELECT
*
FROM
dfp_data.dfp_order) porder
ON
lineitem.order_id = porder.id
LEFT JOIN (
SELECT
*
FROM
adpoint_data.dfp_proposal_lineitem) proposal_lineitem
ON
lineitem.id = proposal_lineitem.dfp_lineitem_id
JOIN (
SELECT
*
FROM
dfp_data.dfp_company) company
ON
porder.advertiser_id = company.id
LEFT JOIN (
SELECT
*
FROM
adpoint_data.dfp_product) product
ON
proposal_lineitem.product_id=product.id
LEFT JOIN (
SELECT
*
FROM
adpoint_data.dfp_proposal) proposal
ON
proposal_lineitem.proposal_id=proposal.id
LEFT JOIN (
SELECT
*
FROM
adpoint_data.dfp_rate_card) rate_card
ON
proposal_lineitem.ratecard_id=rate_card.id
LEFT JOIN (
SELECT
id,
name
FROM
dfp_data.dfp_user) trafficker
ON
porder.trafficker_id =trafficker.id
LEFT JOIN (
SELECT
id,
name
FROM
dfp_data.dfp_user) salesperson
ON
porder. salesperson_id =salesperson.id
Most likely the error you are getting is something like below
Duplicate column names in the result are not supported. Found duplicate(s): name
Legacy SQL adjust trafficker.name and salesperson.name in your SELECT statement into respectively trafficker_name and salesperson_name thus effectively eliminating column names duplication
Standard SQL behaves differently and treat both those columns as named name thus producing duplication case. To avoid it - you just need to provide aliases as in example below
SELECT
lineitem.*,
proposal_lineitem.*,
porder.*,
company.*,
product.*,
proposal.*,
trafficker.name AS trafficker_name,
salesperson.name AS salesperson_name,
rate_card.*
FROM ( ...
You can easily check above explained using below simplified/dummy queries
#legacySQL
SELECT
porder.*,
trafficker.name,
salesperson.name
FROM (
SELECT 1 order_id, 'abc' order_name, 1 trafficker_id, 2 salesperson_id
) porder
LEFT JOIN (SELECT 1 id, 'trafficker' name) trafficker
ON porder.trafficker_id =trafficker.id
LEFT JOIN (SELECT 2 id, 'salesperson' name ) salesperson
ON porder. salesperson_id =salesperson.id
and
#standardSQL
SELECT
porder.*,
trafficker.name AS trafficker_name,
salesperson.name AS salesperson_name
FROM (
SELECT 1 order_id, 'abc' order_name, 1 trafficker_id, 2 salesperson_id
) porder
LEFT JOIN (SELECT 1 id, 'trafficker' name) trafficker
ON porder.trafficker_id =trafficker.id
LEFT JOIN (SELECT 2 id, 'salesperson' name ) salesperson
ON porder. salesperson_id =salesperson.id
Note: if you have more duplicate names - you need to alias all of them too
I can do simple joins effectively but I am faced with the following complex SQL statement to join to a 3rd table to display the HostName in the results as well.
I would like to add the column HostName which exists in the switches table (SwitchID is the primary key and HostName is the column).
Current statement is:
SELECT SwitchID, SUM(score)
I need to display SwitchID, HostName, SUM(score) in the results by joining the switches table.
I have tried many variations but cannot get this to work.
SELECT SwitchID
, SUM(score)
FROM ( SELECT SwitchID
, CallStackDepth * COUNT(*) AS score
FROM huntandpagingfeatures
JOIN huntgroupmembers
ON huntgroupmembers.HuntGroupDN = huntandpagingfeatures.ListDN
WHERE IsHuntGroup = 1
GROUP
BY SwitchID
, ListDN
UNION
ALL
SELECT IF( ucw.currentportid IS NOT NULL
, ucw.currentswitchid
, ucw.homeswitchid
)
AS SwitchID
, count(*) / 2 AS score
FROM userprogbuttons AS upb
INNER
JOIN usercurrentswitch AS ucw
ON upb.userdn = ucw.userdn
WHERE upb.functionid = 30
GROUP
BY SwitchID
) AS t
GROUP
BY SwitchID
SELECT t.SwitchID, SUM(score), s.HostName
FROM ( SELECT SwitchID
, CallStackDepth * COUNT(*) AS score
FROM huntandpagingfeatures
JOIN huntgroupmembers
ON huntgroupmembers.HuntGroupDN = huntandpagingfeatures.ListDN
WHERE IsHuntGroup = 1
GROUP
BY SwitchID
, ListDN
UNION
ALL
SELECT IF( ucw.currentportid IS NOT NULL
, ucw.currentswitchid
, ucw.homeswitchid
)
AS SwitchID
, count(*) / 2 AS score
FROM userprogbuttons AS upb
INNER
JOIN usercurrentswitch AS ucw
ON upb.userdn = ucw.userdn
WHERE upb.functionid = 30
GROUP
BY SwitchID
) AS t
JOIN switches s ON t.SwitchID = s.SwitchID
GROUP BY t.SwitchID, s.HostName
Subquery omitted for brevity:
select
SwitchID,
HostName,
sum(Score)
from
( ... ) as t
join
switches s on t.SwitchID = s.SwitchID
group by
SwitchID,
HostName
Just add the HostName to the group by and done.
You could group by HostName as well as switch ID:
SELECT SwitchID, SUM(score), HostName
--- skipping most of query for simplicity
) AS t
INNER JOIN Switches ON Switches.SwitchID = t.SwitchID
GROUP BY t.SwitchID, Switches.HostName
You could also use a subselect in the column list to return the host name:
SELECT SwitchID, SUM(score),
(SELECT HostName FROM Switches WHERE Switches.SwitchID = t.SwitchID) AS HostName
Suppose I have this query
SELECT * FROM (
SELECT * FROM table_a
WHERE id > 10 )
AS a_results LEFT JOIN
(SELECT * from table_b
WHERE id IN
(SElECT id FROM a_results)
ON (a_results.id = b_results.id)
I would get the error "a_results is not a table". Anywhere I could use the re-use the results of the subquery?
Edit: It has been noted that this query doesn't make sense...it doesn't, yes. This is just to illustrate the question which I am asking; the 'real' query actually looks something like this:
SELECT SQL_CALC_FOUND_ROWS * FROM
( SELECT wp_pod_tbl_hotel . *
FROM wp_pod_tbl_hotel, wp_pod_rel, wp_pod
WHERE wp_pod_rel.field_id =12
AND wp_pod_rel.tbl_row_id =1
AND wp_pod.tbl_row_id = wp_pod_tbl_hotel.id
AND wp_pod_rel.pod_id = wp_pod.id
) as
found_hotel LEFT JOIN (
SELECT COUNT(*) as review_count, avg( (
location_rating + staff_performance_rating + condition_rating + room_comfort_rating + food_rating + value_rating
) /6 ) AS average_score, hotelid
FROM (
SELECT r. * , wp_pod_rel.tbl_row_id AS hotelid
FROM wp_pod_tbl_review r, wp_pod_rel, wp_pod
WHERE wp_pod_rel.field_id =11
AND wp_pod_rel.pod_id = wp_pod.id
AND r.id = wp_pod.tbl_row_id
AND wp_pod_rel.tbl_row_id
IN (
SELECT wp_pod_tbl_hotel .id
FROM wp_pod_tbl_hotel, wp_pod_rel, wp_pod
WHERE wp_pod_rel.field_id =12
AND wp_pod_rel.tbl_row_id =1
AND wp_pod.tbl_row_id = wp_pod_tbl_hotel.id
AND wp_pod_rel.pod_id = wp_pod.id
)
) AS hotel_reviews
GROUP BY hotel_reviews.hotelid
ORDER BY average_score DESC
AS sorted_hotel ON (id = sorted_hotel.hotelid)
As you can see, the sub-query which makes up the found_query table is repeated elsewhere downward as another sub-query, so I was hoping to re-use the results
You can not use a sub-query like this.
I'm not sure I understand your query, but wouldn't that be sufficient?
SELECT * FROM table_a a
LEFT JOIN table_b b ON ( b.id = a.id )
WHERE a.id > 10
It would return all rows from table_a where id > 10 and LEFT JOIN rows from table_b where id matches.